Banded iron formation
Template:Good article Template:Short description Template:Use American English Template:Use dmy dates Template:Infobox rock
.jpg){kind=link}
Banded iron formations (BIFs; also called banded ironstone formations) are distinctive units of sedimentary rock consisting of alternating layers of iron oxides and iron-poor chert. They can be up to several hundred meters in thickness and extend laterally for several hundred kilometers. Almost all of these formations are of Precambrian age and are thought to record the oxygenation of the Earth's oceans. Some of the Earth's oldest rock formations, which formed about Template:Ma (Ma), are associated with banded iron formations.
Banded iron formations are thought to have formed in sea water as the result of oxygen production by photosynthetic cyanobacteria. The oxygen combined with dissolved iron in Earth's oceans to form insoluble iron oxides, which precipitated out, forming a thin layer on the ocean floor. Each band is similar to a varve, resulting from cyclic variations in oxygen production.
Banded iron formations were first discovered in northern Michigan in 1844. Banded iron formations account for more than 60% of global iron reserves and provide most of the iron ore presently mined. Most formations can be found in Australia, Brazil, Canada, India, Russia, South Africa, Ukraine, and the United States.
DescriptionEdit
A typical banded iron formation consists of repeated, thin layers (a few millimeters to a few centimeters in thickness) of silver to black iron oxides, either magnetite (Fe3O4) or hematite (Fe2O3), alternating with bands of iron-poor chert, often red in color, of similar thickness.<ref name="james-1954">Template:Cite journal</ref><ref name="trendall-2002">Template:Cite encyclopedia</ref><ref name=Katsuta2012>Template:Cite journal</ref><ref name="condie-2015">Template:Cite book</ref> A single banded iron formation can be up to several hundred meters in thickness and extend laterally for several hundred kilometers.<ref name="trendall-blockley-2004"/>
Banded iron formation is more precisely defined as chemically precipitated sedimentary rock containing greater than 15% iron. However, most BIFs have a higher content of iron, typically around 30% by mass, so that roughly half the rock is iron oxides and the other half is silica.<ref name="trendall-blockley-2004">Template:Cite encyclopedia</ref><ref name="trendall-2005">Template:Cite encyclopedia</ref> The iron in BIFs is divided roughly equally between the more oxidized ferric form, Fe(III), and the more reduced ferrous form, Fe(II), so that the ratio Fe(III)/Fe(II+III) typically varies from 0.3 to 0.6. This indicates a predominance of magnetite, in which the ratio is 0.67, over hematite, for which the ratio is 1.<ref name="condie-2015"/> In addition to the iron oxides (hematite and magnetite), the iron sediment may contain the iron-rich carbonates siderite and ankerite, or the iron-rich silicates minnesotaite and greenalite. Most BIFs are chemically simple, containing little but iron oxides, silica, and minor carbonate,<ref name="trendall-blockley-2004"/> though some contain significant calcium and magnesium, up to 9% and 6.7% as oxides respectively.<ref name="gole-klein-1981"/><ref name="klein-2005"/>
When used in the singular, the term banded iron formation refers to the sedimentary lithology just described.<ref name="james-1954"/> The plural form, banded iron formations, is used informally to refer to stratigraphic units that consist primarily of banded iron formation.<ref name="explanation">Examples of this usage are found in Gole and Klein 1981; Klein 2005; Trendall 2005; and Zhu et al. 2014.</ref>
A well-preserved banded iron formation typically consists of macrobands several meters thick that are separated by thin shale beds. The macrobands in turn are composed of characteristic alternating layers of chert and iron oxides, called mesobands, that are several millimeters to a few centimeters thick. Many of the chert mesobands contain microbands of iron oxides that are less than a millimeter thick, while the iron mesobands are relatively featureless. BIFs tend to be extremely hard, tough, and dense, making them highly resistant to erosion, and they show fine details of stratification over great distances, suggesting they were deposited in a very low-energy environment; that is, in relatively deep water, undisturbed by wave motion or currents.<ref name="trendall-2002"/> BIFs only rarely interfinger with other rock types, tending to form sharply bounded discrete units that never grade laterally into other rock types.<ref name="trendall-blockley-2004"/>
Banded iron formations of the Great Lakes region and the Frere Formation of western Australia are somewhat different in character and are sometimes described as granular iron formations or GIFs.<ref name="gole-klein-1981"/><ref name="trendall-blockley-2004"/> Their iron sediments are granular to oolitic in character, forming discrete grains about a millimeter in diameter, and they lack microbanding in their chert mesobands. They also show more irregular mesobanding, with indications of ripples and other sedimentary structures, and their mesobands cannot be traced out any great distance. Though they form well-defined, discrete units, these are commonly interbedded with coarse to medium-grained epiclastic sediments (sediments formed by weathering of rock). These features suggest a higher energy depositional environment, in shallower water disturbed by wave motions. However, they otherwise resemble other banded iron formations.<ref name="gole-klein-1981">Template:Cite journal</ref>
The great majority of banded iron formations are Archean or Paleoproterozoic in age. However, a small number of BIFs are Neoproterozoic in age, and are frequently,<ref name="klein-2005"/><ref name="ilyin-2009"/><ref name="bekker-etal-2010">Template:Cite journal</ref> if not universally,<ref name="abd-etal-2019">Template:Cite journal</ref> associated with glacial deposits, often containing glacial dropstones.<ref name="klein-2005"/> They also tend to show a higher level of oxidation, with hematite prevailing over magnetite,<ref name="ilyin-2009"/> and they typically contain a small amount of phosphate, about 1% by mass.<ref name="ilyin-2009"/> Mesobanding is often poor to nonexistent<ref name="cox-etal-2013">Template:Cite journal</ref> and soft-sediment deformation structures are common. This suggests very rapid deposition.<ref name="stern-etal-2013"/> However, like the granular iron formations of the Great Lakes, the Neoproterozoic occurrences are widely described as banded iron formations.<ref name="klein-2005">Template:Cite journal</ref><ref name="ilyin-2009">Template:Cite journal</ref><ref name="stern-etal-2013">Template:Cite journal</ref><ref name="condie-2015"/><ref name="gaucher-etal-2015">Template:Cite encyclopedia</ref><ref name="li-etal-2018">Template:Cite journal</ref>
Banded iron formations are distinct from most Phanerozoic ironstones. Ironstones are relatively rare and are thought to have been deposited in marine anoxic events, in which the depositional basin became depleted in free oxygen. They are composed of iron silicates and oxides without appreciable chert but with significant phosphorus content, which is lacking in BIFs.<ref name="bekker-etal-2010"/>
No classification scheme for banded iron formations has gained complete acceptance.<ref name="trendall-blockley-2004"/> In 1954, Harold Lloyd James advocated a classification based on four lithological facies (oxide, carbonate, silicate, and sulfide) assumed to represent different depths of deposition,<ref name="james-1954"/> but this speculative model did not hold up.<ref name="trendall-blockley-2004"/> In 1980, Gordon A. Gross advocated a twofold division of BIFs into an Algoma type and a Lake Superior type, based on the character of the depositional basin. Algoma BIFs are found in relatively small basins in association with greywackes and other volcanic rocks and are assumed to be associated with volcanic centers. Lake Superior BIFs are found in larger basins in association with black shales, quartzites, and dolomites, with relatively minor tuffs or other volcanic rocks, and are assumed to have formed on a continental shelf.<ref name="gross-1980">Template:Cite journal</ref> This classification has been more widely accepted, but the failure to appreciate that it is strictly based on the characteristics of the depositional basin and not the lithology of the BIF itself has led to confusion, and some geologists have advocated for its abandonment.<ref name="trendall-2002"/><ref name="ohmoto-2004">Template:Cite encyclopedia</ref> However, the classification into Algoma versus Lake Superior types continues to be used.<ref name="taner-2015">Template:Cite journal</ref><ref name="Precambrian Research 2016 pp. 47–79">Template:Cite journal</ref>
OccurrenceEdit
Template:Location map many Banded iron formations are almost exclusively Precambrian in age, with most deposits dating to the late Archean (2800–2500 Ma) with a secondary peak of deposition in the Orosirian period of the Paleoproterozoic (1850 Ma). Minor amounts were deposited in the early Archean and in the Neoproterozoic (750 Ma).<ref name="trendall-blockley-2004"/><ref name="condie-2015"/> The youngest known banded iron formation is an Early Cambrian formation in western China.<ref name="li-etal-2018"/> Because the processes by which BIFs are formed appear to be restricted to early geologic time, and may reflect unique conditions of the Precambrian world, they have been intensively studied by geologists.<ref name="trendall-blockley-2004"/><ref name="condie-2015"/>
Banded iron formations are found worldwide, in every continental shield of every continent. The oldest BIFs are associated with greenstone belts and include the BIFs of the Isua Greenstone Belt, the oldest known, which have an estimated age of 3700 to 3800 Ma.<ref name="trendall-blockley-2004"/><ref name="czaja-etal-2013">Template:Cite journal</ref> The Temagami<ref name="AHI">Template:Cite journal</ref> banded iron deposits formed over a 50-million-year period, from 2736 to 2687 Ma, and reached a thickness of Template:Convert.<ref name="amnh-2020">{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> Other examples of early Archean BIFs are found in the Abitibi greenstone belts, the greenstone belts of the Yilgarn and Pilbara cratons, the Baltic shield, and the cratons of the Amazon, north China, and south and west Africa.<ref name="trendall-blockley-2004"/>
The most extensive banded iron formations belong to what A.F. Trendall calls the Great Gondwana BIFs. These are late Archean in age and are not associated with greenstone belts. They are relatively undeformed and form extensive topographic plateaus,<ref name="trendall-2002"/> such as the Hamersley Range.<ref name="henrietta.liswa.wa.gov.au">MacLeod, W. N. (1966) The geology and iron deposits of the Hamersley Range area. Bulletin Template:Webarchive (Geological Survey of Western Australia), No. 117</ref><ref name="Geology">{{#invoke:citation/CS1|citation |CitationClass=web }}</ref><ref name="Iron2002" /> The banded iron formations here were deposited from 2470 to 2450 Ma and are the thickest and most extensive in the world,<ref name="condie-2015"/><ref name="wam-2014">{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> with a maximum thickness in excess of Template:Convert.<ref name="gole-klein-1981"/> Similar BIFs are found in the Carajás Formation of the Amazon craton, the Cauê Itabirite of the São Francisco craton, the Kuruman Iron Formation and Penge Iron Formation of South Africa, and the Mulaingiri Formation of India.<ref name="trendall-blockley-2004"/>
Paleoproterozoic banded iron formations are found in the Iron Range and other parts of the Canadian Shield.<ref name="trendall-blockley-2004"/> The Iron Range is a group of four major deposits: the Mesabi Range, the Vermilion Range, the Gunflint Range, and the Cuyuna Range. All are part of the Animikie Group and were deposited between 2500 and 1800 Ma.<ref name=af>Template:Cite journal</ref> These BIFs are predominantly granular iron formations.<ref name="trendall-blockley-2004"/>
Neoproterozoic banded iron formations include the Urucum in Brazil, Rapitan in the Yukon, and the Damara Belt in southern Africa.<ref name="trendall-blockley-2004"/> They are relatively limited in size, with horizontal extents not more than a few tens of kilometers and thicknesses not more than about Template:Convert.<ref name="ilyin-2009"/> These are widely thought to have been deposited under unusual anoxic oceanic conditions associated with the "Snowball Earth."<ref name="trendall-2002"/>
OriginsEdit
Banded iron formation provided some of the first evidence for the timing of the Great Oxidation Event, 2,400 Ma.<ref name= "Cloud_1973">Template:Cite journal</ref><ref name="holland-2006">Template:Cite journal</ref> With his 1968 paper on the early atmosphere and oceans of the Earth,<ref name="cloud-1968">Template:Cite journal</ref> Preston Cloud established the general framework that has been widely, if not universally,<ref name="ohmoto-etal-2006">Template:Cite journal</ref><ref>Template:Cite book</ref> accepted for understanding the deposition of BIFs.<ref name="trendall-blockley-2004"/><ref name="condie-2015"/>
Cloud postulated that banded iron formations were a consequence of anoxic, iron-rich waters from the deep ocean welling up into a photic zone inhabited by cyanobacteria that had evolved the capacity to carry out oxygen-producing photosynthesis, but which had not yet evolved enzymes (such as superoxide dismutase) for living in an oxygenated environment. Such organisms would have been protected from their own oxygen waste through its rapid removal via the reservoir of reduced ferrous iron, Fe(II), in the early ocean. The oxygen released by photosynthesis oxidized the Fe(II) to ferric iron, Fe(III), which precipitated out of the sea water as insoluble iron oxides that settled to the ocean floor.<ref name="cloud-1968"/><ref name= "Cloud_1973"/>
Cloud suggested that banding resulted from fluctuations in the population of cyanobacteria due to free radical damage by oxygen. This also explained the relatively limited extent of early Archean deposits. The great peak in BIF deposition at the end of the Archean was thought to be the result of the evolution of mechanisms for living with oxygen. This ended self-poisoning and produced a population explosion in the cyanobacteria that rapidly depleted the remaining supply of reduced iron and ended most BIF deposition. Oxygen then began to accumulate in the atmosphere.<ref name="cloud-1968"/><ref name= "Cloud_1973"/>
Some details of Cloud's original model were abandoned. For example, improved dating of Precambrian strata has shown that the late Archean peak of BIF deposition was spread out over tens of millions of years, rather than taking place in a very short interval of time following the evolution of oxygen-coping mechanisms. However, his general concepts continue to shape thinking about the origins of banded iron formations.<ref name="trendall-2002"/> In particular, the concept of the upwelling of deep ocean water, rich in reduced iron, into an oxygenated surface layer poor in iron remains a key element of most theories of deposition.<ref name="trendall-blockley-2004"/><ref name="simonson-hassler-1996">Template:Cite journal</ref>
The few formations deposited after 1,800 Ma<ref name="Slack_2009">Template:Cite journal</ref> may point to intermittent low levels of free atmospheric oxygen,<ref name="Lyons_2009">Template:Cite journal</ref> while the small peak at Template:Ma may be associated with the hypothetical Snowball Earth.<ref name="Hoffman_1999">Template:Cite journal</ref>
Formation processesEdit
The microbands within chert layers are most likely varves produced by annual variations in oxygen production. Diurnal microbanding would require a very high rate of deposition of 2 meters per year or 5 km/Ma. Estimates of deposition rate based on various models of deposition and sensitive high-resolution ion microprobe (SHRIMP) estimates of the age of associated tuff beds suggest a deposition rate in typical BIFs of 19 to 270 m/Ma, which are consistent either with annual varves or rhythmites produced by tidal cycles.<ref name="trendall-blockley-2004"/>
Preston Cloud proposed that mesobanding was a result of self-poisoning by early cyanobacteria as the supply of reduced iron was periodically depleted.<ref name= "Cloud_1973"/> Mesobanding has also been interpreted as a secondary structure, not present in the sediments as originally laid down, but produced during compaction of the sediments.<ref name="trendall-blockley-2004"/> Another theory is that mesobands are primary structures resulting from pulses of activity along mid-ocean ridges that change the availability of reduced iron on time scales of decades.<ref name="morris-horwitz-1983">Template:Cite journal</ref> In the case of granular iron formations, the mesobands are attributed to winnowing of sediments in shallow water, in which wave action tended to segregate particles of different size and composition.<ref name="trendall-blockley-2004"/>
For banded iron formations to be deposited, several preconditions must be met.<ref name="cox-etal-2013"/>
- The deposition basin must contain waters that are ferruginous (rich in iron).
- This implies they are also anoxic, since ferrous iron oxidizes to ferric iron within hours or days in the presence of dissolved oxygen. This would prevent transport of large quantities of iron from its sources to the deposition basin.
- The waters must not be euxinic (rich in hydrogen sulfide), since this would cause the ferrous iron to precipitate out as pyrite.
- There must be an oxidation mechanism active within the depositional basin that steadily converts the reservoir of ferrous iron to ferric iron.
Source of reduced ironEdit
There must be an ample source of reduced iron that can circulate freely into the deposition basin.<ref name="trendall-blockley-2004"/> Plausible sources of iron include hydrothermal vents along mid-ocean ridges, windblown dust, rivers, glacial ice, and seepage from continental margins.<ref name="cox-etal-2013"/>
The importance of various sources of reduced iron has likely changed dramatically across geologic time. This is reflected in the division of BIFs into Algoma and Lake Superior-type deposits.<ref name="Nadoll_2014">Template:Cite journal</ref><ref name="Zhu_2014">Template:Cite journal</ref><ref name="Li_2015">Template:Cite journal</ref> Algoma-type BIFs formed primarily in the Archean. These older BIFs tend to show a positive europium anomaly consistent with a hydrothermal source of iron.<ref name="condie-2015"/> By contrast, Lake Superior-type banded iron formations primarily formed during the Paleoproterozoic era, and lack the europium anomalies of the older Algoma-type BIFs, suggesting a much greater input of iron weathered from continents.<ref name="klein-2005"/><ref name="Li-etal-2015">Template:Cite journal</ref><ref name="condie-2015"/>
Absence of oxygen or hydrogen sulfideEdit
The absence of hydrogen sulfide in anoxic ocean water can be explained either by reduced sulfur flux into the deep ocean or a lack of dissimilatory sulfate reduction (DSR), the process by which microorganisms use sulfate in place of oxygen for respiration. The product of DSR is hydrogen sulfide, which readily precipitates iron out of solution as pyrite.<ref name="holland-2006"/>
The requirement of an anoxic, but not euxinic, deep ocean for deposition of banded iron formation suggests two models to explain the end of BIF deposition 1.8 billion years ago. The "Holland ocean" model proposes that the deep ocean became sufficiently oxygenated at that time to end transport of reduced iron. Heinrich Holland argues that the absence of manganese deposits during the pause between Paleoproterozoic and Neoproterozoic BIFs is evidence that the deep ocean had become at least slightly oxygenated. The "Canfield ocean" model proposes that, to the contrary, the deep ocean became euxinic and transport of reduced iron was blocked by precipitation as pyrite.<ref name="holland-2006"/>
Banded iron formations in northern Minnesota are overlain by a thick layer of ejecta from the Sudbury Basin impact. An asteroid (estimated at Template:Convert across) impacted into waters about Template:Convert deep 1.849 billion years ago, coincident with the pause in BIF deposition. Computer models suggest that the impact would have generated a tsunami at least Template:Convert high at the point of impact, and Template:Convert high about Template:Convert away. It has been suggested that the immense waves and large underwater landslides triggered by the impact caused the mixing of a previously stratified ocean, oxygenated the deep ocean, and ended BIF deposition shortly after the impact.<ref name="Slack_2009"/>
OxidationEdit
Although Cloud argued that microbial activity was a key process in the deposition of banded iron formation, the role of oxygenic versus anoxygenic photosynthesis continues to be debated, and nonbiogenic processes have also been proposed.
Oxygenic photosynthesisEdit
Cloud's original hypothesis was that ferrous iron was oxidized in a straightforward manner by molecular oxygen present in the water:<ref name= "Cloud_1973"/><ref name="cox-etal-2013"/>
The oxygen comes from the photosynthetic activities of cyanobacteria.<ref name="cox-etal-2013"/> Oxidation of ferrous iron may have been hastened by aerobic iron-oxidizing bacteria, which can increase rates of oxidation by a factor of 50 under conditions of low oxygen.<ref name="cox-etal-2013"/>
Anoxygenic photosynthesisEdit
Oxygenic photosynthesis is not the only biogenic mechanism for deposition of banded iron formations. Some geochemists have suggested that banded iron formations could form by direct oxidation of iron by microbial anoxygenic phototrophs.<ref>Template:Cite journal</ref> The concentrations of phosphorus and trace metals in BIFs are consistent with precipitation through the activities of iron-oxidizing bacteria.<ref name="konhauser-etal-2002">Template:Cite journal</ref>
Iron isotope ratios in the oldest banded iron formations (3700-3800 Ma), at Isua, Greenland, are best explained by assuming extremely low oxygen levels (<0.001% of modern O2 levels in the photic zone) and anoxygenic photosynthetic oxidation of Fe(II):<ref name="czaja-etal-2013"/><ref name="cox-etal-2013"/>
This requires that dissimilatory iron reduction, the biological process in which microorganisms substitute Fe(III) for oxygen in respiration, was not yet widespread.<ref name="czaja-etal-2013"/> By contrast, Lake Superior-type banded iron formations show iron isotope ratios that suggest that dissimilatory iron reduction expanded greatly during this period.<ref name="johnson-etal-2008">Template:Cite journal</ref>
An alternate route is oxidation by anaerobic denitrifying bacteria. This requires that nitrogen fixation by microorganisms is also active.<ref name="cox-etal-2013"/>
Abiogenic mechanismsEdit
The lack of organic carbon in banded iron formation argues against microbial control of BIF deposition.<ref name="klein-beukes-1989"/> On the other hand, there is fossil evidence for abundant photosynthesizing cyanobacteria at the start of BIF deposition<ref name="trendall-blockley-2004"/> and of hydrocarbon markers in shales within banded iron formation of the Pilbara craton.<ref name="brocks-etal-1999">Template:Cite journal</ref> The carbon that is present in banded iron formations is enriched in the light isotope, 12C, an indicator of a biological origin. If a substantial part of the original iron oxides was in the form of hematite, then any carbon in the sediments might have been oxidized by the decarbonization reaction:<ref name="trendall-2002"/>
Trendall and J.G. Blockley proposed, but later rejected, the hypothesis that banded iron formation might be a peculiar kind of Precambrian evaporite.<ref name="trendall-blockley-2004"/> Other proposed abiogenic processes include radiolysis by the radioactive isotope of potassium, 40K,<ref name="draganic-etal-1991">Template:Cite journal</ref> or annual turnover of basin water combined with upwelling of iron-rich water in a stratified ocean.<ref name="klein-beukes-1989">Template:Cite journal</ref>
Another abiogenic mechanism is photooxidation of iron by sunlight. Laboratory experiments suggest that this could produce a sufficiently high deposition rate under likely conditions of pH and sunlight.<ref name="braterman-etal-1983">Template:Cite journal</ref><ref name="braterman-cairns-smith-1987">Template:Cite journal</ref> However, if the iron came from a shallow hydrothermal source, other laboratory experiments suggest that precipitation of ferrous iron as carbonates or silicates could seriously compete with photooxidation.<ref name="konhauser-etal-2007">Template:Cite journal</ref>
DiagenesisEdit
Regardless of the precise mechanism of oxidation, the oxidation of ferrous to ferric iron likely caused the iron to precipitate out as a ferric hydroxide gel. Similarly, the silica component of the banded iron formations likely precipitated as a hydrous silica gel.<ref name="trendall-blockley-2004"/> The conversion of iron hydroxide and silica gels to banded iron formation is an example of diagenesis, the conversion of sediments into solid rock.
There is evidence that banded iron formations formed from sediments with nearly the same chemical composition as is found in the BIFs today. The BIFs of the Hamersley Range show great chemical homogeneity and lateral uniformity, with no indication of any precursor rock that might have been altered to the current composition. This suggests that, other than dehydration and decarbonization of the original ferric hydroxide and silica gels, diagenesis likely left the composition unaltered and consisted of crystallization of the original gels.<ref name="trendall-blockley-2004"/> Decarbonization may account for the lack of carbon and preponderance of magnetite in older banded iron formations.<ref name="trendall-2002"/> The relatively high content of hematite in Neoproterozoic BIFs suggests they were deposited very quickly and via a process that did not produce great quantities of biomass, so that little carbon was present to reduce hematite to magnetite.<ref name="cox-etal-2013"/>
However, it is possible that BIF was altered from carbonate rock<ref name="kimberley-1974">Template:Cite journal</ref> or from hydrothermal mud<ref name="krapez-etal-201">Template:Cite journal</ref> during late stages of diagenesis. A 2018 study found no evidence that magnetite in BIF formed by decarbonization, and suggests that it formed from thermal decomposition of siderite via the reaction
The iron may have originally precipitated as greenalite and other iron silicates. Macrobanding is then interpreted as a product of compaction of the original iron silicate mud. This produced siderite-rich bands that served as pathways for fluid flow and formation of magnetite.<ref>Template:Cite journal</ref>
The Great Oxidation EventEdit
Banded formation iron deposition peaks at the beginning of Stage 2 and pauses at the beginning of Stage 3.
{{#invoke:Labelled list hatnote|labelledList|Main article|Main articles|Main page|Main pages}} The peak of deposition of banded iron formations in the late Archean, and the end of deposition in the Orosirian, have been interpreted as markers for the Great Oxygenation Event. Prior to 2.45 billion years ago, the high degree of mass-independent fractionation of sulfur (MIF-S) indicates an extremely oxygen-poor atmosphere. The peak of banded iron formation deposition coincides with the disappearance of the MIF-S signal, which is interpreted as the permanent appearance of oxygen in the atmosphere between 2.41 and 2.35 billion years ago. This was accompanied by the development of a stratified ocean with a deep anoxic layer and a shallow oxidized layer. The end of deposition of BIF at 1.85 billion years ago is attributed to the oxidation of the deep ocean.<ref name="holland-2006"/>
Snowball Earth hypothesisEdit
{{#invoke:Labelled list hatnote|labelledList|Main article|Main articles|Main page|Main pages}}
Until 1992<ref>Template:Cite book</ref> it was assumed that the rare, later (younger) banded iron deposits represented unusual conditions where oxygen was depleted locally. Iron-rich waters would then form in isolation and subsequently come into contact with oxygenated water. The Snowball Earth hypothesis provided an alternative explanation for these younger deposits. In a Snowball Earth state the continents, and possibly seas at low latitudes, were subject to a severe ice age circa 750 to 580 Ma that nearly or totally depleted free oxygen. Dissolved iron then accumulated in the oxygen-poor oceans (possibly from seafloor hydrothermal vents).<ref name="cheilletz-etal-2006">Template:Cite journal</ref> Following the thawing of the Earth, the seas became oxygenated once more causing the precipitation of the iron.<ref name="trendall-blockley-2004"/><ref name="condie-2015"/> Banded iron formations of this period are predominantly associated with the Sturtian glaciation.<ref name="stern-etal-2006">Template:Cite journal</ref><ref name="cox-etal-2013"/>
An alternative mechanism for banded iron formations in the Snowball Earth era suggests the iron was deposited from metal-rich brines in the vicinity of hydrothermally active rift zones<ref>Template:Cite journal</ref> due to glacially-driven thermal overturn.<ref name="young-2002">Template:Cite journal</ref><ref name="stern-etal-2006"/> The limited extent of these BIFs compared with the associated glacial deposits, their association with volcanic formations, and variation in thickness and facies favor this hypothesis. Such a mode of formation does not require a global anoxic ocean, but is consistent with either a Snowball Earth or Slushball Earth model.<ref name="young-2002"/><ref name="cox-etal-2013"/>
Economic geologyEdit
Banded iron formations provide most of the iron ore presently mined.<ref name="trendall-2005"/> More than 60% of global iron reserves are in the form of banded iron formation, most of which can be found in Australia, Brazil, Canada, India, Russia, South Africa, Ukraine, and the United States.<ref name="Nadoll_2014" /><ref name="Zhu_2014" />
Different mining districts coined their own names for BIFs. The term "banded iron formation" was coined in the iron districts of Lake Superior, where the ore deposits of the Mesabi, Marquette, Cuyuna, Gogebic, and Menominee iron ranges were also variously known as "jasper", "jaspilite", "iron-bearing formation", or taconite. Banded iron formations were described as "itabarite" in Brazil, as "ironstone" in South Africa, and as "BHQ" (banded hematite quartzite) in India.<ref name="trendall-2005"/>
Banded iron formation was first discovered in northern Michigan in 1844, and mining of these deposits prompted the earliest studies of BIFs, such as those of Charles R. Van Hise and Charles Kenneth Leith.<ref name="trendall-blockley-2004"/> Iron mining operations on the Mesabi and Cuyuna Ranges evolved into enormous open pit mines, where steam shovels and other industrial machines could remove massive amounts of ore. Initially the mines exploited large beds of hematite and goethite weathered out of the banded iron formations, and some Template:Convert of this "natural ore" had been extracted by 1980.<ref name="explore-2016">{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> By 1956, large-scale commercial production from the BIF itself began at the Peter Mitchell Mine near Babbitt, Minnesota.<ref name=Ridge>Template:Cite book</ref> Production in Minnesota was Template:Convert of ore concentrate per year in 2016, which is about 75% of total U.S. production.<ref name="explore-2016"/> Magnetite-rich banded iron formation, known locally as taconite, is ground to a powder, and the magnetite is separated with powerful magnets and pelletized for shipment and smelting.<ref name="DNR1">{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>
Iron ore became a global commodity after the Second World War, and with the end of the embargo against exporting iron ore from Australia in 1960, the Hamersley Range became a major mining district.<ref name="trendall-blockley-2004"/><ref name="henrietta.liswa.wa.gov.au"/><ref name="Geology"/><ref name="Iron2002">{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> The banded iron formations here are the thickest and most extensive in the world,<ref name="condie-2015"/><ref name="wam-2014"/> originally covering an area of Template:Convert and containing about Template:Convert of iron.<ref name="wam-2014"/> The range contains 80 percent of all identified iron ore reserves in Australia.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> Over Template:Convert of iron ore is removed from the range every year.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>
The Itabarite banded iron formations of Brazil cover at least Template:Convert and are up to Template:Convert thick.<ref name="gole-klein-1981"/> These form the Quadrilatero Ferrifero or Iron Quadrangle, which resembles the Iron Range mines of United States in that the favored ore is hematite weathered out of the BIFs.<ref name="mdo-2020">{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> Production from the Iron Quadrangle helps make Brazil the second largest producer of iron ore after Australia, with monthly exports averaging Template:Convert from December 2007 to May 2018.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>
Mining of ore from banded iron formations at Anshan in north China began in 1918. When Japan occupied Northeast China in 1931, these mills were turned into a Japanese-owned monopoly, and the city became a significant strategic industrial hub during the Second World War. Total production of processed iron in Manchuria reached Template:Convert in 1931–1932. By 1942, Anshan's Shōwa Steel Works total production capacity reached Template:Convert per annum, making it one of the major iron and steel centers in the world.<ref name="Beasley 1991">Template:Cite book</ref> Production was severely disrupted during the Soviet occupation of Manchuria in 1945 and the subsequent Chinese Civil War. However, from 1948 to 2001, the steel works produced Template:Convert 290 million tons of steel, Template:Convert of pig iron and Template:Convert of rolled steel. Annual production capacity Template:As of is Template:Convert of pig iron, Template:Convert of steel and Template:Convert of rolled steel. A quarter of China's total iron ore reserves, about Template:Convert, are located in Anshan.<ref>Template:Cite book</ref>
See alsoEdit
ReferencesEdit
Further readingEdit
- {{#invoke:citation/CS1|citation
|CitationClass=web }}