Template:Short description Template:For-multi
A full metal jacket (FMJ) bullet is a small-arms projectile consisting of a soft core (often lead) encased in an outer shell ("jacket") of harder metal, such as gilding metal, cupronickel, or, less commonly, a steel alloy. A bullet jacket usually allows higher muzzle velocities than bare lead without depositing significant amounts of metal in the bore. It also prevents damage to bores from hard steel or armor-piercing core materials.
HistoryEdit
Despite a widespread belief that the full metal jacket bullet was invented ca. 1882 by Swiss Colonel Eduard Rubin while he was working for the Swiss Federal Ammunition Factory and Research Center,<ref name="auto">Template:Cite book</ref><ref name="swissrifles.com">{{#invoke:citation/CS1|citation |CitationClass=web }}</ref><ref name="findarticles.com">{{#invoke:citation/CS1|citation |CitationClass=web }}</ref><ref>Template:Cite book</ref> in fact it was known already in the 1880s that the actual inventor was Prussian Major (later Lt.-Col.) Template:Ill (1835-1885), who came up with the idea either in 1875 or 1876.<ref>Template:Cite book</ref><ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref><ref>Template:Cite book</ref><ref>Template:Cite book</ref><ref>Template:Cite book</ref>
The use of full metal jacketing in military ammunition came about in part because of the need for improved feeding characteristics in small arms that used internal mechanical manipulation of the cartridge in order to chamber rounds as opposed to externally hand-reloading single-shot firearms. The harder metal used in bullet jackets was less prone to deformation than softer exposed lead, which improved feeding. That also allowed bullets to withstand much higher velocities caused by the decrease of the caliber.<ref>Template:Cite book</ref>
In addition to the various advantages afforded by FMJ rounds, the Hague Convention of 1899, Declaration III, prohibits the use in international warfare of bullets that easily expand or flatten in the body.
Impact characteristicsEdit
By design, fully jacketed projectiles have less capacity to expand after contact with the target than a hollow-point projectile or a soft-point projectile. While this can be an advantage when engaging targets behind cover, it can also be a disadvantage as an FMJ bullet may pierce completely through a target, leading to less severe wounding, and possibly failing to disable the target. Furthermore, a projectile that goes completely through a target can cause unintentional damage behind the target.<ref>Template:Cite book</ref>
See alsoEdit
ReferencesEdit
External linksEdit
- {{#invoke:citation/CS1|citation
|CitationClass=web }}
- {{#invoke:citation/CS1|citation
|CitationClass=web }}
- {{#invoke:citation/CS1|citation
|CitationClass=web }}