Fumigation

Template:Short description Template:Refimprove

File:Fumigation Tent Riverside 2011.jpg

A building in Riverside, California, subject to tent fumigation, or "tenting"

Fumigation of a hotel (Vila Shanti) in Bali where the gas even reaches the hotel lobby (February 2010)

Fumigation is a method of pest control or the removal of harmful microorganisms by completely filling an area with gaseous pesticides, or fumigants, to suffocate or poison the pests within. It is used to control pests in buildings (structural fumigation), soil, grain, and produce. Fumigation is also used during the processing of goods for import or export to prevent the transfer of exotic organisms.

Structural fumigation targets pests inside buildings (usually residences), including pests that inhabit the physical structure itself, such as woodborers and drywood termites. Commodity fumigation, on the other hand, is also to be conducted inside a physical structure, such as a storage unit, but it aims to eliminate pests from infesting physical goods, usually food products, by killing pests within the container which will house them.

Each fumigation lasts for a certain duration. This is because after spraying the pesticides, or fumigants, only the pests around are eradicated.<ref name=FBaur162165>Template:Cite book</ref>

ProcessEdit

Fumigation generally involves the following phases: first, humans are evacuated from the area intended for fumigation and the area covered to create a sealed environment. Next, the fumigant is released into the space to be fumigated. The space is held for a set period while the fumigant gas percolates through the space and acts on/kills any infestation in the area. Finally, the space is ventilated so that the poisonous gases are allowed to escape from the space, rendering it safe for humans to enter. If successful, the fumigated area is now safe and pest free. <ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>

Tent fumigationEdit

Structural fumigation techniques differ from building to building. In a residential setting, a "rubber" tent or tents, typically made of plastic/pvc coated canvas material, may be placed over the entire structure while the pesticides are being released into the vacant structure. This process is called tent fumigation, or "tenting". The sealed tent contains the poisonous gases and prevents them from escaping into the environment. This process is commonly used for the treatment of drywood termites and/or bedbugs, using sulfuryl fluoride as the pesticide (sulfuryl fluoride is a naturally occurring gas, used in much higher concentration than found in the natural atmosphere, and which leaves no physical residue). The fumigated structure can be re-occupied after the tent has been removed and the pesticide has dissipated to a safe level, with no need for physical cleaning.<ref name=Ullmann/>

Operating theatresEdit

Fumigation of hospital rooms with high concentrations of toxic chemicals has been proposed to reduce microbial agents on hospital surfaces and to control surgical site infections.<ref>Template:Cite journal</ref> Formaldehyde fumigation has long been an accepted method for areas where microbiological cleanliness is required. Fumigation with formaldehyde vapor is the recognized and most commonly used method because it is a cost-effective procedure. Template:Cn However, alternative methods are sought due to safety and efficacy concerns. Vaporized hydrogen peroxide is a dry gaseous method that has been used as a reliable alternative for aseptic processing isolators, and more recently, for room/facility decontamination.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> Hydrogen peroxide and silver in solution and diluted in water is a non-toxic and low cost agent. For example, to fumigate a 1000Template:Nbsft³ (~28.32 Template:Nbsm³) area, a 20% solution (200Template:NbsmL of solution in 1000Template:NbsmL demineralized water) would be sprayed via fogger for 30 minutes. Fogging may be done at a rate of up to 130Template:NbsmL/minute and the contact time should be at least one hour.<ref> Template:Cite journal</ref>

ChemicalsEdit

At the heart of this technology is the use of chemicals. Ideally, these chemicals kill or passivate the targeted creatures without harming others. Usually such a feat is impossible, so fumigation is conducted in the absence of humans.<ref name=Ullmann>Template:Cite book</ref>

Caption text
chemical	boiling point/volatility	safety	comment
Methyl bromide	gas (4.3 °C)	, TLV-TWA 5 ppm, MAK 5 ppm.	restricted by the Montreal Protocol.
ethylene oxide	gas (10.7 °C)	TLV-TWA 1 ppm	food
sulfuryl fluoride	gas (-55 °C)	TLV-TWA 5 ppm,	applied in tent for termites
chloropicrin	112 °C	TLV-TWA 0.1 ppm, MAK 0.1 ppm,	lachrymator.
naphthalene	sublimable solid	TLV-TWA 10 ppm,	fabrics ("mothballs")
phosphine	gas (-87.7 °C)	??	rodents and insects in grain silos
1,3-dichloropropene	111 °C	MAK 75 ppm	soil fumigant

Discontinued or rarely usedEdit

Many chemicals have been discontinued owing to safety issues.

Ethylene dibromide, carcinogenic
Methallyl chloride, carcinogenic
dazomet (methyl isothiocyanate precursor)
DBCP
formaldehyde, carcinogenic and explosive
hydrogen cyanide, extremely toxic
iodoform, expensive vs methyl bromide
methyl isocyanate

SafetyEdit

Fumigation is a hazardous operation. Generally it is a legal requirement that the operator who carries out the fumigation operation holds official certification to perform the fumigation, as the chemicals used are toxic to most forms of life, including humans.<ref name=FBaur162165 />

Post operation ventilation of the area is a critical safety aspect of fumigation. It is important to distinguish between the pack or source of the fumigant gas and the environment which has been fumigated. While the fumigant pack may be safe and spent, the space will still hold the fumigant gas until it has been ventilated.