Incubator escapee wiki

Honda F20C engine

Article Discussion

Template:Infobox automobile engine The F20C and F22C1 were inline-4 engines produced by Honda for use in the Honda S2000. They are one of the few Honda 4-cylinder automobile engines that are designed to sit longitudinally for rear wheel drive.

These engines are related to the F-series engines found in the mid-1990s Honda Accord and Prelude.<ref>Template:Cite journal</ref> To get most out of the compact-sized engine, Honda engineers utilized technology derived from Honda's racing engines.<ref name=JDMspecF20C/> The F20C and F22C1 have two overhead cams with roller followers, a ladder-frame main bearing stiffener, a VTEC system for both the intake and exhaust camshaft, Fiber-Reinforced Metal cylinder liners (FRM), Forged aluminum molybdenum disulfide-coated piston skirts for reduced friction, and uses a timing chain.

The VTEC system consists of two separate cam lobe profiles. Variable cam phasing is not used. Roller followers are used to reduce friction in the valvetrain. The rocker arms are constructed using metal injection molding.

The engine block is constructed of aluminum with a fiber-reinforced metal sleeve. A timing chain drives an intermediate gear, which drives the cams. The pistons are forged aluminum. The intake plenum was designed with minimal volume for fast engine response, and a Template:Convert flywheel was fitted until 2004. A high-flow catalyst is supplied along with an exhaust air-injection system, which greatly decreases catalyst light-off time and cold emissions.

F20CEdit

|CitationClass=web }}</ref>

  • VTEC actuates between 5,500-6,000 rpm depending on ECU triggers.<ref name="auto">{{#invoke:citation/CS1|citation

|CitationClass=web }}</ref>

The F20C was designed with high engine speed capability in mind, for increased power output; the rev limit is 9,000 rpm, with VTEC engagement at 6,000 rpm. Its relatively long stroke of 84 mm results in a mean piston speed of 4,965 ft/m, or 25.2 m/s, which was higher than any other production car to date.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> Power output is Template:Convert at 8,300 rpm in North America and Europe. The Japanese version, which has a higher compression ratio, is capable of Template:Convert at 8,600 rpm. Honda's F20C Engine won a spot on Wards' 10 Best Engines List twice, in 2000 and 2001.

The engine displaces Template:Convert, lending to the Honda S2000's name. This method of naming follows suit with the rest of the Honda S roadsters (i.e. Honda S500, S600, and S800).

Applications:

The F20C produces the highest specific power output for any naturally aspirated piston engine in a car priced under US$100,000, at Template:Convert per liter, ahead of the SR16VE N1 found in the homologation version of the JDM Nissan Pulsar producing Template:Convert for a specific power of Template:Convert per liter. Honda's F20C engine held the record for producing the highest specific power output for any mass production naturally aspirated piston engine in a car, at 123.5 HP/L, until Ferrari began production of the 458 Italia in 2010, which produced 124.5 HP/L.<ref name=JDMspecF20C>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>

Although designed at the end of the previous century, the F20C is still one of the highest output per liter and the highest revving mass production engines ever made. In recognition of its incredible power output, the Honda S2000's engine has won the International Engine of the Year category for 1.8 to 2.2-liter engines five times in its lifetime (from 2000 to 2004).<ref name=JDMspecF20C/>

F22C1Edit

  • Rod Length: 149.65 mm (approximately 5.892 in)
  • Rod/stroke ratio: approximately 1.6499:1
  • Power:

|CitationClass=web }}</ref> (revised to Template:Convert at 7,800 rpm in 2005 per SAE Certified Power standard)<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>

  • Rev limit: 8,200 rpm
  • VTEC: "6,000 rpm"<ref name="auto"/>

In 2004, Honda produced a stroked Template:Convert version of the F20C, increasing displacement by Template:Convert to Template:Convert. Dubbed the F22C1, it was originally designed for the North American market being introduced for the 2004 model year. Maximum power output was maintained at Template:Convert at 7,800 rpm. Rated torque increased from Template:Convert at 7,500 rpm for the F20C to Template:Convert at 6,500 rpm for the F22C. The redline was reduced from 8,900 rpm to 8,200 rpm, mandated by the longer travel distance of the pistons. Peak horsepower output was originally rated identical to the F20C, with "overall powerband characteristics strengthened 4% to 10% between 1,000 -8,000 rpm".<ref name="auto1"/>

The F22C1 was used exclusively in the North American market for 2004 and 2005 with the F20C being used in all other markets. In 2006, the engine fully replaced F20C engines in the Japanese market as well which resulted in a drop in rated power output from Template:Convert to Template:Convert. Outside Japan and the United States, the F20C continued to be the only available engine.

Applications:

  • 2004–2009 Honda S2000 (F22C1) (North America)
  • 2006–2009 Honda S2000 (Japan)

See alsoEdit

ReferencesEdit

Template:Reflist

External linksEdit


{{#invoke:Navbox|navbox}}

Retrieved from "https://zalansite.site/mediawiki/index.php?title=Honda_F20C_engine&oldid=751031"