NForce2
Template:Short description Template:Lowercase title Template:Infobox chipset
The Nvidia nForce2 chipset was released by Nvidia in July 2002 as a refresh to the original nForce product offering. The nForce2 chipset was a platform for motherboards supporting AMD's Socket A CPUs along with DDR SDRAM.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> There were multiple variations of the chipset including one with an integrated GeForce4 MX graphics processor (IGP), and one without.
RefreshEdit
{{ safesubst:#invoke:Unsubst||date=__DATE__ |$B= {{ safesubst:#invoke:Unsubst||date=__DATE__ |$B= Template:Ambox }} }} In 2003, Nvidia released a refreshed nForce2, called "nForce2 Ultra 400".<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> The nForce2 Ultra 400<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> and nForce2 400 presented official support for a 200 MHz FSB and PC-3200 DDR SDRAM, whereas the older nForce2 only supported a maximum of 166 MHz FSB. Ultra 400 offered dual-channel support, while the plain 400 was single-channel PC-3200-capable. Both performed very similarly because neither had the IGP. Athlon XP did not benefit significantly from the added bandwidth because the Athlon XP's bus was only capable of bandwidth matching a single channel of PC-3200. <ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>
The new chipset was partnered with several different southbridges, including one with (MCP-T) and one without (MCP) SoundStorm and dual Ethernet NICs. In 2004 three new southbridges were introduced: MCP-S integrated Serial ATA, MCP-RAID had additional RAID-functions and MCP-Gb featured Gigabit Ethernet. These newer southbridges did not integrate the SoundStorm unit nor the dual-Ethernet capabilities of the MCP-T.