Surgical mask
Template:For Template:Short description Template:Infobox medical intervention (new)
A surgical mask, also known by other names such as a medical face mask or procedure mask, is a personal protective equipment used by healthcare professionals that serves as a mechanical barrier that interferes with direct airflow in and out of respiratory orifices (i.e. nose and mouth). This helps reduce airborne transmission of pathogens and other aerosolized contaminants between the wearer and nearby people via respiratory droplets ejected when sneezing, coughing, forceful expiration or unintentionally spitting when talking, etc. Surgical masks may be labeled as surgical, isolation, dental or medical procedure masks.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>
Although the material of which surgical masks are made will filter out some viruses and bacteria by trapping the aerosol suspended in breathed air, they only provide partial protection from airborne diseases because of the typically loose fit between the mask edges and the wearer's face.<ref name="pmid32631450">Template:Cite journal</ref><ref name=":6">Template:Cite journal</ref><ref name="pmid33024333">Template:Cite journal</ref> Surgical masks are distinct from filtering respirators, such as those made to the American N95 standard, which are more airtight and purposefully designed to protect against finer airborne particles.
Evidence from randomized controlled trials that surgical masks reduce infection from diseases such as influenza is weak.<ref name="pmid32027586">Template:Cite journal</ref><ref name=":7" /> Although a recent very large (over 300,000 people) study found some evidence that they reduced transmission in the community,<ref>Template:Cite journal</ref> surgical masks can vary greatly in quality which may make these studies less useful.<ref name=":6" /> The effect of surgical masks is partially attributed to filtering out some of aerosol particles that are how airborne diseases are transmitted. Surgical masks are highly variable<ref name=":6" /> but the material of which they are made typically filter out more aerosol particles than do cloth masks but much less than does the material of which N95, FFP2 and similar masks, are made.<ref>Template:Cite journal</ref> This combined with the poor fit suggests that surgical masks offer some protection to airborne diseases such as COVID-19 but less than do N95, FFP2 and similar masks.
There are standards for the materials masks are made from. For example, the European EN 14683 Type II standard requires the material of the mask to filter particles (mean diameter close to 3 micrometres) containing the bacterium Staphylococcus aureus.<ref name=":8">{{#invoke:citation/CS1|citation |CitationClass=web }}</ref><ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> The bacterial filtration efficiency of the mask material is the fractional reduction in the number of colony-forming units (CFUs) when the aerosol is passed through the material. For a Type II mask under this standard, the material must filter enough of the aerosol particles containing the bacteria to achieve a CFU reduction of at least 98%.
ASTM International has an F2100 standard<ref name=":9">{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> with similar bacterial filtering standard to the European Type II standard but in addition uses a test aerosol of 0.1 micrometre particles. The Level 3 standard F2100 standard requires that these particles must be filtered out with at least 98% efficiency. Neither the European nor the ASTM standard tests performance as worn, they just test the material — the difference being the air leakage. This is different to personal protection equipment standards such as N95 and FFP, which do test performance as worn.
Surgical masks are made of a nonwoven fabric created using a melt blowing process. They came into use in the 1960s and largely replaced cloth facemasks in developed countries.<ref>Template:Cite journal</ref> The colored (usually dark blue, green, or occasionally yellow) side of the mask (fluid-repellant layer) is to be worn outwards, and the white side (absorbent layer) inwards.<ref name="pmid32832908">Template:Cite journal</ref><ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref><ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>
In some East Asian countries, masks have often customarily been worn by people who are sick in order to avoid spreading it, to protect against air pollution or allergens, as a fashion statement, or to deter social interaction.<ref name=":1">{{#invoke:citation/CS1|citation |CitationClass=web }}</ref><ref name=":4">{{#invoke:citation/CS1|citation |CitationClass=web }}</ref><ref name=":5">{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> The use of surgical masks during the COVID-19 pandemic was a subject of debate,<ref name="mask_not_mask">Template:Cite news</ref> as mask shortage was a central issue.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref><ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>
FunctionEdit
Template:Multiple image A surgical mask serves as a mechanical barrier that interferes with direct airflow in and out of respiratory orifices (i.e. nose and mouth). Most commonly used surgical masks are designed to only trap respiratory droplets, and therefore do not filter or block fine airborne particles that are smaller than the designed filtration ratings, which may be transmitted by coughs, sneezes, unintentional spitting during talking, or certain aerosol-generating medical procedures (e.g. bronchoscopy, laryngoscopy or dental procedures). Surgical masks also cannot provide complete protection from germs and other contaminants because of the often loose fit between the mask edges and the wearer's face,<ref name=":2" /> especially when the mask is worn outright incorrectly (e.g. low with the nose and/or mouth exposed).
A surgical mask is a disposable device that creates a physical barrier between the respiratory tract openings (nose and mouth) of the wearer and potentially pathogenic contaminants in the immediate environment. If worn properly, surgical masks are meant to help block out most (if not all) large-particle droplets, splashes, sprays, or splatter that may contain viruses and bacteria, keeping them from entering the wearer's nose and mouth.,<ref name=":2">{{#invoke:citation/CS1|citation |CitationClass=web }}Template:Dead linkTemplate:Cbignore Template:PD-inline</ref> and conversely are also effective barriers for retaining large droplets released from the wearer's the mouth and nose.<ref name="canada">{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> Surgical masks help reduce exposure of the wearer's saliva and respiratory secretions to others<ref name=":2" /> that could otherwise travel up to Template:Convert.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> Surgical mask also remind wearers not to touch their mouth or nose, which could otherwise transfer viruses and bacteria after having touched a contaminated surface.<ref name=":0" />
A surgical mask is not to be confused with a respirator (which is specifically rated for sub-micron particles) and is not certified as such. Surgical masks are not designed to protect the wearer from inhaling airborne bacteria or virus particles and are less effective than respirators, which are designed for this purpose.<ref name="canada" /> Collection efficiency of surgical mask filters can range from less than 10% to nearly 90% for different manufacturers’ masks when measured using the test parameters for NIOSH certification. However, a study found that even for surgical masks with "good" filters, 80–100% of subjects failed an OSHA-accepted qualitative fit test, and a quantitative test showed 12–25% leakage.<ref name=":3">{{#invoke:citation/CS1|citation |CitationClass=web }} Template:PD-inline</ref>
Modern surgical masks are made from paper or other non-woven material and should be discarded after each use.<ref name="h1n1masks">{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>
Physical formEdit
| Parameter | Typical unit |
|---|---|
| Pressure differential, ∆P | cm of H2O / cm2 |
| Filtration and exposure | % |
| Liquid penetration resistance | mbar |
| Air permeability | ml/s⋅cm2 at 100 Pa |
| Water vapor permeability | g/24 hr⋅cm2 |
| Water repellency | grade |
The design of the surgical masks depends on the intended usages. Usually, the masks are rectangular shaped with pleats to allow the wearer to expand and curve the mask so it can better cover the entirety of the area from the nose to around the chin. The outward-facing side of the mask is typically colored (usually blue, green, or yellow) and made thicker, tougher, and water impermeable. The inner layers of the mask are made of three-ply (three layers) melt-blown polymer (most commonly polypropylene) placed between non-woven fabric.<ref name="thomas">{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> The melt-blown material acts as the filter that stops microbes from penetrating and exiting the mask.<ref name="thomas" /> Some masks have an attached thin polyethylene faceshield (known as a "splash shield") to provide additional spray protection over the eye area.Template:Citation needed
Template:AnchorA different type of mask, known as "duckbill" masks, uses a trapezoid pouch-like design that has significantly shortened side edges — sometimes none at all — to minimize loose gaps that pathogens can leak past. These masks are typically made to the N95/P2 standards, and are commonly used for clinical situations that demand fine particulates protection, such as tuberculosis.
Small strips of foam or thickened fabric are often sewn along the top edge of the mask to help better seal away exhaled water vapors (which can fog up eyewears and faceshields) and soak up excess perspiration dripping from above. Small bendable metal strips are frequently added to the top edge to better fit over the nasal bridge. Occasionally adhesive tapes can also be added to secure the seal and prevent the mask from slipping up and down.
The masks are typically fastened to the head with straps or elastic bands that are attached to the mask's four corners.<ref>Template:Cite book</ref> Straps come in four free-hanging ribbons that are manually tied in two pairs horizontally around the back of the head, and are most frequently used in surgical operations due to the ability to customize the strap length and tension comfortably to the wearer's face shape and head movements. Elastic bands come in a pair of loops that can either be horizontally or vertically attached. Horizontal loops go around the head like tied straps, designed to exert tension on the top and bottom edges of the mask for firmer contact seal, and are usually seen on duckbill masks; while vertical loops hook around the ears with less tension (due to the weaker rigidity of the elastocartilaginous auricles compared to the bony skull) and thus less firmly secured to the face, but are more popular in non-procedural usages due to the ease of putting on and taking off.
Filter material in the middle layer may be made of microfibers with an electrostatic charge; that is, the fibers are electrets. An electret filter increases the chances that smaller particles will veer and hit a fiber, rather than going straight through (electrostatic capture).<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref><ref name="PM03">{{#invoke:citation/CS1|citation |CitationClass=web }}</ref><ref>Template:Cite patent</ref><ref name="Australia">{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>Template:Better source neededTemplate:Medical citation needed While there is some development work on making electret filtering materials that can stand being washed and reused,<ref name="kaist">Template:Cite news</ref> current commercially produced electret filters are ruined by many forms of disinfection, including washing with soap and water or alcohol, which destroys the electric charge.<ref name="CDC_guidelines" /> During the COVID-19 pandemic, public health authorities issued guidelines on how to save, disinfect and reuse electret-filter masks without damaging the filtration efficiency.<ref name="paperbag">{{#invoke:citation/CS1|citation |CitationClass=web }}</ref><ref name="CDC_guidelines">{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> Standard disposible surgical masks are not designed to be washed.
Physical properties and qualityEdit
Performance of surgical masks is evaluated based on such parameters as filtration (mask capture of exhaled aerosols), exposure (transfer of aerosols from outside), mask airflow resistance (pressure difference during breathing, ΔP, also known as breathability),<ref>Template:Cite journal</ref> liquid penetration resistance, air and water vapor permeability, water repellency (for outer and inner surfaces).<ref>Template:Cite journal</ref>
Filtration and exposure is typically measured in bacterial filtration efficiency (BFE) using particles of size 3.0 μm. Particulate filtration efficiency (PFE) using particles of size 0.3 μm is only measured in China.<ref name="YY0469" />
HistoryEdit
Face masks for use in surgery were developed in Europe by several physicians, including Jan Mikulicz-Radecki at the University of Breslau and Paul Berger in Paris, in the late nineteenth century, as a result of increasing awareness of germ theory and the importance of antiseptic procedures in medicine.<ref>Template:Cite journal</ref> In response to a pneumonic plague in Manchuria and Mongolia in 1910, Chinese-Malaysian epidemiologist Dr. Wu Lien-teh greatly improved on the designs he had seen in Europe to develop a face mask of layers of gauze and cotton that would protect both the wearer and others.
Modern surgical masks began to be used in the 1960s. Their adoption caused cloth facemasks, which had been used since the late 19th century, to completely fall out of use in the developed world.<ref name=":22">Template:Cite book</ref><ref name=":42">Template:Cite journal</ref> However, cloth masks and surgical masks both continued to be used in developing countries.<ref name=":02">Template:Cite journal</ref>
COVID-19 pandemicEdit
{{#invoke:Labelled list hatnote|labelledList|Main article|Main articles|Main page|Main pages}}
As the pandemic raged on, healthcare workers were required to continue wearing surgical masks for 12 or more hours a day. This caused the ear loops of the masks to chafe the back of their ears. Ear savers, plastic straps and hooks that go around wearer's heads, were invented to move the ear loops away from the wearer's ears. They could be made on demand by using 3D printing process.<ref>Template:Cite book</ref>
UseEdit
Healthcare workersEdit
.jpg){kind=link}
A surgical mask is intended to be worn by health professionals during surgery and certain health care procedures<ref>Procedure mask. nursingcenter.com</ref> to catch microorganisms shed in liquid droplets and aerosols from the wearer's mouth and nose.<ref name="h1n1masks" /> Evidence supports the effectiveness of surgical masks in reducing the risk of infection among other healthcare workers and in the community.<ref>Template:Cite journal</ref> However, a Cochrane review found that there is no clear evidence that disposable face masks worn by members of the surgical team would reduce the risk of wound infections after clean surgical procedures. However, the review cautioned that the studies examined are of low quality and that the result should not be generalized.<ref name=":7">Template:Cite journal</ref>
Healthcare workers are trained in how to put on, handle, remove, and dispose of surgical masks. For healthcare workers, safety guidelines recommend the wearing of a face-fit tested N95 or FFP3 respirator mask instead of a surgical mask in the vicinity of pandemic-flu patients, to reduce the exposure of the wearer to potentially infectious aerosols and airborne liquid droplets.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref><ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref><ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>
General publicEdit
In community and home settings, the use of facemasks and respirators generally are not recommended, with other measures preferred such as avoiding close contact, maintaining good hand hygiene,<ref name="h1n1masks" /> and wearing cloth face coverings.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> Surgical masks provide some protection against the spread of diseases, and improvised masks provide about half as much protection.<ref>Template:Cite journal</ref>
The custom of wearing surgical masks began in Japan in the early 20th century, when the Spanish flu pandemic swept the world and killed 20 to 40 million people. A second global influenza pandemic in 1934 established the use of surgical masks in Japan. Later, this custom spread to East Asia.<ref name=":1" />
In Japan and Taiwan, surgical masks have commonly been worn in winter months during the flu season by those who have respiratory illnesses as a courtesy intended to prevent viral transmission.<ref name=":1" /><ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref><ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> People in Japan as well as Korea and China may also wear masks in any season because of air pollution or allergies. Some younger Japanese people wear masks and audio headsets to signal a desire to avoid interaction.<ref name=":1" /> Hay fever has been common in Japan since the 1980s, and as of 2019, 42.5% of the Japanese population suffers from some form of hay fever, with 38.8% suffering from cedar pollinosis, making the use of surgical masks more common in winter and spring.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref><ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref><ref name=":1" /> On the other hand, acupuncturist Michelle M. Ching says that mask-wearing as a custom appeared in East Asia rather than other parts of the world also facing pollution and disease due to the historical influence of Traditional Chinese Medicine and its ideas about air and wind.<ref name=":1" />
More recently, due to the rising issue of smog in South and Southeast Asia, surgical masks and air filtering face masks are now frequently used in major cities in India, Nepal and Thailand when air quality deteriorates to toxic levels.<ref>Template:Cite news</ref><ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref><ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> Additionally, face masks are used in Indonesia, Malaysia and Singapore during the Southeast Asian haze season.<ref>Template:Cite news</ref><ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> Air filtering surgical-style masks are quite popular across Asia and as a result, many companies have released masks that not only prevent the breathing in of airborne dust particles but are also fashionable.<ref>Delhi residents brave the smog in style</ref><ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> In Japan, some use masks as fashion statements, at times as a result of influence from lolita fashion, black metal and K-pop stars.<ref name=":4" /><ref name=":5" />
Surgical masks may also be worn to conceal identity. In the United States banks, convenience stores, etc. have banned their use as a result of criminals repeatedly doing so, but allowed facemasks due to the COVID-19 pandemic.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> In the 2019–20 Hong Kong protests, some protestors wore surgical masks amongst other types of mask to avoid recognition, and the government banned such use.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>
Research carried out during the COVID-19 pandemic found that surgical masks increase the attractiveness of the wearer<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref><ref>Template:Cite journal</ref> and this is more so than other types of masks.<ref>Template:Cite journal</ref>
Research and developmentEdit
Researchers are developing face-masks which may help reduce viral spread better than existing ones and/or have possibly useful properties such as biodegradability or better breathability.<ref>Template:Cite news</ref><ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref><ref>Template:Cite journal</ref><ref>Template:Cite news</ref><ref name="10.1038/s41598-021-98577-6"/><ref name=fastcompany>Template:Cite news</ref><ref name=controleng>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> Some are exploring whether attachments could be added to existing face-masks to make them more effective<ref name=fastcompany/> such as due to virus-deactivating fabrics or impregnations.<ref name=fastcompany/><ref name="10.1038/s41598-021-98577-6">Template:Cite journal</ref> The COVID-19 pandemic increased efforts to develop such masks.<ref name=fastcompany/>
There also is an experimental face mask with an embedded biosensor that can detect a pathogenic signature (such as one of SARS-CoV-2)<ref>Template:Cite journal</ref> and face masks that glow under ultraviolet light if they contain SARS-CoV-2 when the filter is taken out and sprayed with a fluorescent dye that contains antibodies from ostrich eggs.<ref>Template:Cite news</ref>
Other research investigated environmental pollution associated with face mask waste management<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref><ref>Template:Cite journal</ref><ref>Template:Cite journal</ref> and weak spots of masks with product designs of the widely applied FFP standards, in particular variants with exhalation valves.<ref>Template:Cite journal</ref>
RegulationEdit
In the United States, surgical masks are cleared for marketing by the U.S. Food and Drug Administration. In the European Economic Area (EEA), surgical masks have to be certified through the CE marking process in order to be commercialized. CE marking of surgical masks involves the respect of many obligations indicated in the Medical Device Regulation (Council Regulation 2017/745 of 5 April 2017 concerning medical devices, OJ No L 117/1 of 2017-05-05).
Surgical masks for use in the US and the EEA conform to ASTM F2100<ref name=":9" /> and EN 14683<ref name=":8" /> respectively. In both standards, a mask must have a Bacterial Filtration Efficiency (BFE) of more than 95%, for an aerosol of particles of size approximately 3.0 μm.<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref>
In China, two types of masks are common: surgical masks that conform to YY 0469 standard (BFE ≥ 95%, PFE ≥ 30%, splash resistance) and single-use medical masks that conform to YY/T 0969 standard (BFE ≥ 95%).<ref name="YY0469">中华人民共和国医药行业标准：YY 0469–2011 医用外科口罩（Surgical mask） (in Chinese)</ref><ref name="YY0969">中华人民共和国医药行业标准：YY/T 0969–2013 一次性使用医用口罩（Single-use medical face mask） Template:Webarchive (in Chinese)</ref> Daily protective masks conforming to GB/T 32610 standard<ref>{{#invoke:citation/CS1|citation |CitationClass=web }}</ref> is yet another type of masks that can have similar appearance to surgical masks.
Sensorized Surgical MasksEdit
In 2014, Firat Güder while he was a research fellow at Harvard University, together with Professor George Whitesides, invented a wireless surgical face mask that can monitor breathing of the individual wearing the mask. Their technology relied on disposal paper-based printed sensors which could be integrated into the mask.<ref>Template:Cite journal</ref> The technology, which was first published in 2016, led to the formation of a start-up (Spyras Ltd) company to commercialize it which was later acquired.
See alsoEdit
ReferencesEdit
Further readingEdit
- Template:Cite journal
- Describes recommended method of wearing a surgical mask
- Template:Cite journal
- Describes surgical mask BFE testing using an Andersen sampler
- Template:Cite journal
- Comments on the previous paper; tests using a particle counter instead of an Andersen sampler, and compares the results to 30 CFR 11 NIOSH respirators
External linksEdit
- Filtering out confusion. Frequently Asked Questions about Respiratory Protection – National Institute for Occupational Safety and Health
- Template:Cite journal
- Coronavirus disease (COVID-19) advice for the public: When and how to use masks
Template:Authority control Template:Concepts in infectious disease