Open main menu
Home
Random
Recent changes
Special pages
Community portal
Preferences
About Wikipedia
Disclaimers
Incubator escapee wiki
Search
User menu
Talk
Dark mode
Contributions
Create account
Log in
Editing
Case-hardening
(section)
Warning:
You are not logged in. Your IP address will be publicly visible if you make any edits. If you
log in
or
create an account
, your edits will be attributed to your username, along with other benefits.
Anti-spam check. Do
not
fill this in!
{{Short description|Process of hardening the surface of a metal object}} {{For|the woodworking term|case hardening (woodworking)}} [[File:SAA 44-40.JPG|thumb|[[Colt Single Action Army|Colt Peacemaker]], showing discoloration from case-hardening]] '''Case-hardening''' or [[carburization]] is the process of introducing [[carbon]] to the surface of a low-carbon iron, or more commonly a low-carbon steel object, in order to [[Hardened steel|harden]] the surface. Iron which has a carbon content greater than ~0.02% is known as [[steel]]. Steel which has a carbon content greater than ~0.25% can be direct-hardened by heating to around 600Β°C, and then quickly cooling, often by immersing in water or oil, known as [[quenching]]. Hardening is desirable for metal components because it gives increased strength and wear resistance, the tradeoff being that hardened steel is generally more brittle and less malleable than when it is in a softer state. In order to produce a hard skin on steels which have less than ~0.2% carbon, carbon can be introduced into the surface by heating steel in the presence of some carbon-rich substance such as powdered charcoal or hydrocarbon gas. This causes carbon to diffuse into the surface of the steel. The depth of this high carbon layer depends on the exposure time, but 0.5mm is a typical case depth. Once this has been done the steel must be heated and quenched to harden this higher carbon 'skin'. Below this skin, the steel core will remain soft due to its low carbon content.{{Citation needed|date=October 2024}}
Edit summary
(Briefly describe your changes)
By publishing changes, you agree to the
Terms of Use
, and you irrevocably agree to release your contribution under the
CC BY-SA 4.0 License
and the
GFDL
. You agree that a hyperlink or URL is sufficient attribution under the Creative Commons license.
Cancel
Editing help
(opens in new window)