Editing Change ringing (section)

{{Short description|Art of ringing a set of bells in mathematical patterns}}
{{Refimprove|date=May 2021}}
[[File:Bob Minor peal plaque in SS Peter and Paul's Church, Chatteris, Cambridgeshire.jpg|thumb|Peal board at St Peter and St Paul Church, [[Chatteris]], Cambridgeshire, commemorating the ringing of a [[peal]] in 1910; 5,040 changes were rung in two hours and forty-nine minutes.]]'''Change ringing''' is the art of ringing a set of [[tuning (music)|tuned]] [[bell (instrument)|bells]] in a tightly controlled manner to produce precise variations in their successive striking sequences, known as "changes". This can be by [[method ringing]] in which the ringers commit to memory the rules for generating each change, or by [[call changes]], where the ringers are instructed how to generate each change by instructions from a conductor. This creates a form of bell music which cannot be discerned as a conventional [[melody]], but is a series of mathematical sequences. It can also be automated by machinery.

Change ringing originated following the invention of English [[full circle ringing|full-circle]] tower bell ringing in the early 17th century, when [[bell ringer]]s found that swinging a bell through a much larger arc than that required for swing-chiming gave control over the time between successive strikes of the clapper. Ordinarily a bell will swing through a small arc only at a set speed governed by its size and shape in the nature of a simple pendulum, but by swinging through a larger arc approaching a full circle, control of the strike interval can be exercised by the ringer.  This culminated in the technique of full circle ringing, which enabled ringers to independently change the speeds of their individual bells accurately to combine in ringing different mathematical permutations, known as "changes". 
 
Speed control of a tower bell is exerted by the ringer only when each bell is mouth upwards and moving slowly near the balance point; this constraint and the intricate rope manipulation involved normally requires that each bell have its own ringer. The considerable weights of full-circle tower bells also means they cannot be easily stopped or started and the practical change of interval between successive strikes is limited. This places limitations on the rules for generating easily-rung changes; each bell must strike once in each change, but its position of striking in successive changes can only change by one place.

Change ringing is practised worldwide, but it is by far most common on [[church bells]] in English churches, where it first developed. 
Change ringing is also performed on [[handbell]]s, where conventionally each ringer holds two bells, and chimed on [[carillon]]s and chimes of bells, though these are more commonly used to play conventional melodies.