Editing Gimlet (tool) (section)

{{Short description|Hand tool}}
{{lead extra info|date=July 2023}}
{{multiple image
| footer    = Two gimlets
| direction = vertical
| width     = 250
| image1    = gimlet - tool.jpg
| image2    = BlueGimlet.JPG
}}

A '''gimlet''' is a [[hand tool]] for [[drilling]] small holes, mainly in wood, without splitting. It was defined in [[Joseph Gwilt]]'s ''Architecture'' (1859) as "a piece of steel of a semi-cylindrical form, hollow on one side, having a cross handle at one end and a worm or screw at the other".<ref>[[Joseph Gwilt]] (1859), ''Architecture''</ref>

A gimlet is always a small tool. A similar tool of larger size is called an [[auger (drill)|auger]]. The cutting action of the gimlet is slightly different from an auger and the initial hole it makes is smaller; the cutting edges pare away the wood, which is moved out by the spiral sides, falling out through the entry hole. This also pulls the gimlet further into the hole as it is turned. Unlike a [[bradawl]], pressure is not required once the tip has been drawn in.

The name ''gimlet'' comes from the [[Old French]] {{lang|fro|guinbelet}}, {{lang|fro|guimbelet}}, later {{lang|fro|guibelet}}, probably a diminutive of the [[Anglo-Norman language|Anglo-French]] {{lang|xno|wimble}}, a variation of "guimble", from the Middle Low German {{lang|gml|wiemel}} (cf. the [[Scandinavia]]n {{lang|gmq|wammie}}, 'to bore or twist'). Modern French uses the term {{lang|fr|vrille}}, also the French for "tendril".<ref>''[[OED|Oxford English Dictionary]]'', 2nd. Edition, (1989)</ref>