Editing Hi-hat (section)

{{Use dmy dates|date=November 2022}}
{{Short description|Percussion instrument}}
{{About|the percussion instrument|other uses|High hat (disambiguation){{!}}High hat}}
{{More citations needed|date=April 2021}}
{{TOC_Right}}
[[File:Hi-hat.jpg|thumb|right|170px|A modern hi-hat]]
A '''hi-hat''' ('''hihat''', '''high-hat''', etc.) is a combination of two [[cymbal]]s and a pedal, all mounted on a metal stand. It is a part of the standard [[drum kit]] used by drummers in many styles of [[music]] including [[rock music|rock]], [[popular music|pop]], [[jazz]], and [[blues]].<ref name="DRUMHISTORY" /> Hi-hats consist of a matching pair of small to medium-sized cymbals mounted on a stand, with the two cymbals facing each other. The bottom cymbal is fixed and the top is mounted on a rod which moves the top cymbal toward the bottom one when the pedal is depressed (a hi-hat that is in this position is said to be "closed" or "closed hi-hats").

The hi-hat evolved from a "sock cymbal", a pair of similar cymbals mounted at ground level on a hinged, spring-loaded foot apparatus. Drummers invented the first sock cymbals to enable one drummer to play multiple percussion instruments at the same time. Over time these became mounted on short stands—also known as "low-boys"—and activated by pedals similar to those used in modern hi-hats.  When extended upward roughly 3 feet (76&nbsp;cm) they were originally known as "high sock" cymbals, which evolved over time to the familiar "high-hat" term.<ref name=guide>''[https://books.google.com/books?id=SQkjBOF-iH4C&dq=sock+cymbal&pg=PA23 Guide to Vintage Drums]'', John Aldridge, [[Hal Leonard Corporation]], 1994, {{ISBN|9780931759796}}</ref>

The cymbals may be played by closing them together with the pedal, which creates a "chck" sound or striking them with a stick, which may be done with them open, closed, open and then closed after striking to dampen the ring, or closed and then opened to create a shimmering effect at the end of the note. Depending on how hard a hi-hat is struck and whether it is "open" (i.e., pedal not pressed, so the two cymbals are not closed together), a hi-hat can produce a range of dynamics, from very quiet "chck" (or "chick") sounds, done with merely gently pressing the pedal—this is suitable for soft [[accompaniment]] during a ballad or the start of a [[guitar solo]]—to very loud (e.g. striking fully open hats hard with sticks, a technique used in loud [[heavy metal music]] songs).

While the term ''hi-hat'' normally refers to the entire setup (two cymbals, stand, pedal, rod mechanism), in some cases, drummers use it to refer exclusively to the two cymbals themselves.