Editing In-circuit emulation (section)

{{Use American English|date = March 2019}}
{{Short description|Debugging for embedded systems}}
{{Use mdy dates|date = March 2019}}
{{Refimprove|date=May 2008}}

'''In-circuit emulation''' ('''ICE''') is the use of a hardware device or '''in-circuit emulator''' used to [[debug]] the [[software]] of an [[embedded system]]. It operates by using a processor with the additional ability to support debugging operations, as well as to carry out the main function of the system. Particularly for older systems, with limited processors, this usually involved replacing the processor temporarily with a hardware emulator: a more powerful although more expensive version. It was historically in the form of [[bond-out processor]] which has many internal signals brought out for the purpose of debugging. These signals provide information about the state of the processor.

More recently the term also covers [[JTAG]]-based hardware debuggers which provide equivalent access using [[on-chip debugging]] hardware with standard production chips.  Using standard chips instead of custom bond-out versions makes the technology ubiquitous and low cost, and eliminates most differences between the development and runtime environments. In this common case, the ''in-circuit emulator'' term is a [[misnomer]], sometimes confusingly so, because emulation is no longer involved.

Embedded systems present special problems for programmers because they usually lack [[Keyboard (computing)|keyboards]], [[computer monitor|monitors]], [[disk drive]]s and other user interfaces that are present on computers. These shortcomings make in-circuit software debugging tools essential for many common development tasks.