Editing ACCESS.bus (section)

==History==
[[Apple Computer]]'s [[Apple Desktop Bus]] (ADB), introduced in the mid-1980s, allowed all sorts of low-speed devices like mice and keyboards to be daisy-chained into a single port on the computer, greatly reducing the number of ports needed, as well as the resulting cable clutter. ADB was universal on the [[Mac (computer)|Macintosh]] line by the late 1980s, and offered a clear advantage over the profusion of standards being used on PCs.<ref name=pc>{{cite journal |first=Gary |last=Berline |title=Ports of ACCESS |journal=PC Magazine |date=August 1993 |url=https://books.google.com/books?id=H53CIZnYLZwC&pg=PA30}}</ref>

A.b was an attempt to reproduce these qualities in a new standard for the PC and workstation market. It had two additional advantages over ADB; hot plugging ([[Plug and play|plug-n-play]]) and the ability for the devices to have their own host controllers so devices could be plugged together without the need for a host computer to control the communications. Philips also suggested that the ability to plug any A.b device into any computer meant that people with special devices, like mice designed for people with disabilities, might carry their device from machine to machine.<ref name=pc/>

An industry group, the ACCESS.bus Industry Group, or ABIG, was created in 1993 to control the development of the standard. There were 29 voting members of the group, including [[Microsoft]]. By this point DEC had introduced A.b on some of their workstations and a number of peripherals had been introduced by a variety of companies.<ref name=pc/>

Development of USB began the next year, in 1994, and the consortium included a number of the members of the A.b group, notably DEC and Microsoft. Interest in A.b waned, leaving Philips as the primary supporter.<ref>{{cite web|last=Janssen |first=Cory |url=http://www.techopedia.com/definition/2320/universal-serial-bus-usb |title=What is a Universal Serial Bus (USB)? |publisher=Techopedia |access-date=2014-02-12}}</ref> A.b had a number of technical advantages over USB, which would not re-appear on that system until years later, and it was also easier and less expensive to implement. However, it was also much slower than USB, ten to a hundred times. USB fit neatly into the performance niche between A.b and [[FireWire]], which made it practical to design a system with USB alone. [[Intel]]'s backing was another deciding factor; the company began including USB controllers in the standard motherboard control chips, making the cost of implementation roughly that of the connector.

The only widespread use of the A.b system was [[DDC2|DDC2Ab]] interface by the [[VESA]] group. They needed a standardized bus for communicating device abilities and status between monitors and computers, and selected I²C because it required only two pins; by re-using existing reserved pins in the standard [[VGA]] cable they could implement a complete A.b bus (including power). The bus could then be offered as an external expansion port simply by adding a socket on the monitor case. A number of monitors with A.b connectors started appearing in the mid-1990s, notably those by [[NEC]], but this was at about the same time USB was being heavily promoted and few devices were available to plug into them, mostly mice and keyboards. The bus remained the standard way for a monitor to communicate setup information to the host graphics card.