Editing Electrical efficiency (section)

== Efficiency of typical electrical devices ==

''Efficiency'' should not be confused with ''[[effectiveness]]'': a system that wastes most of its input power but produces exactly what it is meant to is effective but not efficient. The term "efficiency" makes sense only in reference to the wanted effect. A [[light bulb]], for example, might have 2% efficiency at emitting light yet still be 98% efficient at heating a room (In practice it is nearly 100% efficient at heating a room because the light energy will also be converted to heat eventually, apart from the small fraction that leaves through the windows). An [[electronic amplifier]] that delivers 10 watts of power to its load (e.g., a [[loudspeaker]]), while drawing 20 watts of power from a power source is 50% efficient. (10/20 × 100 = 50%)
* Electric kettle: more than 90%{{citation needed|date=October 2014}} (comparatively little heat energy is lost during the 2 to 3 minutes a kettle takes to boil water).
* A premium efficiency electric motor: more than 90% ''(see Main Article: [[Premium efficiency]]).''
* A large power [[transformer]] used in the electrical grid may have efficiency of more than 99%. Early 19th century transformers were much less efficient, wasting up to a third of the energy passing through them.{{Citation needed|date=October 2014}}
* A [[Thermal power station|steam power plant]] used to generate [[electricity]] may have 30-40% efficiency.{{Citation needed|date=August 2019}}