Editing Engine swap (section)

== Types of engine swaps ==

Swapping to a diesel engine for improved fuel economy is a long established practice; with modern high-efficiency diesel engines, this does not necessarily mean a reduction in performance associated with older-version diesel engine swaps. For the particular application of off-road vehicles, the high torque at low speed of turbo diesels (combined with a fuel economy advantage) makes these conversions particularly effective. However, older non-electronic fuel injection diesel engines were well known for their reliability, especially in wet conditions.

An engine swap can either be to another engine intended to work in the car by the manufacturer, or one totally different. The former is much simpler than the latter. Fitting an engine into a car that was never intended to accept that engine may be more laborious and costly; modifying the car to fit the engine, modifying the engine to fit the car, and building custom engine mounts and transmission bellhousing adaptors to interface them along with a custom-built driveshaft. Some small businesses build conversion kits for engine swaps, such as the Fiat Twin cam into a [[Morris Minor]] or similar.

A common anecdote{{citation needed|date=June 2014}} among tuners in the United States is that the easiest way to make a car faster is to drop in a more powerful engine, such as the General Motors small-block engine as used in the [[Chevrolet Corvette|Corvette]]. The [[Chevrolet Vega]] (and its [[Pontiac Astre|Astre]], [[Chevrolet Monza|Monza]], and [[Buick Skyhawk#First generation (1975–1980)|Skyhawk]] sisters) is a candidate for a [[Chevrolet small-block engine|small-block]] swap; some have seen [[Chevrolet Big-Block engine|big block]]s as well. Chevrolet engines have been used in such cars as [[Toyota Supra]]s, BMWs, RX-7s, [[Mazda Miata]]s, [[Jaguar Cars|Jaguar]] sedans, [[Chevrolet Corvair|Corvair]]s, and Datsun 240s, 260s, and 280Zs.

In the Honda world, engine swaps include the Civic Si (B16A), the Civic Type R (B16B), Integra GSR (B18C), and the Integra Type R (B18C5) engines. More recently, swapping larger displacement Honda engines (such as the J-series V6) has become more popular. Swapping any of these motors into a lightweight 1988–2000 Honda Civic chassis can achieve greater performance.{{citation needed|date=June 2014}}

Chrysler made many turbocharged vehicles in the 1980s, and these engines share much in common with the mass-produced naturally aspirated vehicles. It is quite common{{citation needed|date=June 2014}} to obtain an engine from a vehicle such as a [[Dodge Daytona]] and swap it into a [[Dodge Aries]]. The Mopar Performance arm even offered a kit to upgrade the Dodge Daytona to rear wheel drive with a Mopar V8.

Engine swaps are also somewhat common within the [[Volkswagen]] tuning scene, often placing [[Volkswagen Type 2|Type 2]] (Bus), [[Volkswagen Type 3|Type 3]], and [[Volkswagen Type 4|Type 4]] (Squareback) engines in the [[Volkswagen Beetle|Type 1]] (Beetle). Water-cooled engines, such as the [[Volkswagen Golf Mk1#Golf GTI|GTI]] 16-valve four, [[VR6 engine|VR6]], or [[List of Volkswagen Group petrol engines#1.8 R4 20vT (EA113/EA827)|1.8 T]] are commonly swapped into the Mark II [[Grand Tourer Injection|GTI]], [[Volkswagen Jetta|Jetta]], and [[Volkswagen Corrado|Corrado]]. Less common is the swap into a Mark 1 [[Volkswagen Golf|Golf]] or Cabriolet, giving an amazing [[power-to-weight ratio]], even with minimally modified powerplants. Porsche engines are also very popular. One of the most popular options is to take the engine from a Porsche 911 super 1600. Vintage VW's also take very well to the Subaru EJ "flat four" engine, which also has a factory turbo-charged variant.

In the [[Super GT]] racing series, engine swaps can be considered a way of life for the upper tier GT500 cars, most of which are provided with specially modified racing engines from the manufacturers. GT500 class rules themselves allow for any engine to be swapped into a car as long as it is from the same manufacturer. Notable examples include Toyota swapping in highly tuned 4-cylinder engines originally from the [[Toyota Celica]] into their [[Toyota Supra]] GT500 race cars.

British sports cars (such as [[MG Cars|MG]]s and [[Triumph Motor Company|Triumph]]s and [[Sunbeam Alpine]]s) from the late 1960s and early 1970s were attractive and light-weight cars that had excellent suspensions. However, they were known for troublesome electrical systems, modest power levels and a certain amount of unreliability. It is popular{{citation needed|date=June 2014}} to take one of these small classic sports cars and add a more powerful engine. The original manufacturers did this when the vehicles were current with the [[MGB GT V8]] and the [[Sunbeam Tiger]]. The all-aluminum {{convert|215|cid|cc|abbr=on}} [[Buick V8 engine#215|Buick and Oldsmobile V8]] engines are a traditional choice for these cars. Swapping the stock MGB all-iron 1.8L 4-cylinder engine and 4-speed transmission for a '''Buick 215 V8''' and a modern 5-speed transmission actually improves both cornering and acceleration because it reduces the overall weight of the car by about {{convert|40|lb|kg|abbr=on}}. Power is approximately doubled. Derivatives of that classic General Motors engine, the 3.5L, 3.9L, and 4.2L [[Rover V8 engine|Rover V8]]s are also frequently used. (The original Buick / Oldsmobile, the Rover, and the related Morgan-licensed V8, are simple bolt-ins.<ref>

Moreover, in the mid-1980s, [[hot rod]]ders discovered the 215 could be stretched to as much as {{convert|305|cid|L|0|abbr=on|disp=flip}}, using the Buick 300 [[crankshaft]], new cylinder sleeves, and an assortment of non-Buick parts. It could also be fitted with high-compression [[cylinder head]]s from the [[Morgan Motor Company|Morgan]] [[Morgan Plus 8|+8]]. Using the 5 liter Rover block and crankshaft, a maximum displacement of {{convert|317.8|cid|cc|abbr=on|disp=flip}} is possible. Davis, Marlan. "Affordable Aluminum V8's [sic]", in ''Hot Rod'' Magazine, March 1985, pp.84-9 & 121.</ref>)

Although the more recent "narrow-angle" 60-degree Ford and [[General Motors 60° V6 engine|GM V6]] engines—notably the '''GM 3.4L "L32"'''—are more compact than the Rover/Buick and Ford V8s, they usually do not equal the power-to-weight ratio of the popular 90-degree V8s frequently swapped into smaller cars. These V6s can, however, be very cost-effective and easier to fit into a variety of car bodies.

The '''Ford 302 (5.0L) V8''', with its cast iron block, results in spectacular power-to-weight ratios for straight-line acceleration. If the Ford 302 is fitted with aluminium heads, intake, and water pump, the resulting engine only adds about {{convert|40|lb|kg|abbr=on}} to the front of an MGB, and is substantially more powerful and lighter-weight than the iron-block six-cylinder found in an MGC or TR6. An aluminium 302 performance block is available that weighs 60&nbsp;lb (27&nbsp;kg) less than the common iron version, and can be found in displacements of 331 and 347 ci, but those are significantly more expensive than using the common 302 internals.

The Nissan [[SR20DET]] is an all-aluminium fuel-injected DOHC turbocharged 4-cylinder. This compact engine, along with the very compact, light, and powerful [[Mazda Wankel engine#13B|Mazda 13B]] rotary engine, have both been transplanted into too many different cars to assemble a complete list.