Editing First baseman (section)

== Fielding ==
[[Image:Baseball first baseman 2004.jpg|220px|thumb|right|[[Sean Casey (baseball)|Sean Casey]], former first baseman for the [[Cincinnati Reds]] tries unsuccessfully to keep his foot on the base while receiving a throw from an infielder.]]
[[Image:Baseball Play-at-first.jpg|thumb|240px|right|A high school first baseman takes a throw from the third baseman in an attempt to have the runner called "out".]]

Good defensive first basemen, according to baseball writer and historian [[Bill James]], are capable of playing off first base so that they can field ground balls hit to the fair side of first base.{{Citation needed|date=August 2010}} The first baseman then relies upon the pitcher to cover first base to receive the ball to complete the out. Indications of a good defensive first baseman include a large number of assists and a low number of throwing errors by other infielders.

=== In general ===
The nature of play at first base often requires first basemen to stay close to the bag to hold runners or to reach the bag before the batter. First basemen are not typically expected to have the range required of a [[third baseman]], [[shortstop]], [[second baseman]] or an [[outfielder]]. As a result, first base is not usually perceived to be as physically demanding as other positions. However, it can also be a very hard position to play; a large amount of concentration and timing is required. Though many play at first base their entire career, occasionally veteran players move to first base to extend their careers or to accommodate other recently acquired players. Facing a possible trade or a considerable reduction in playing time, a player may opt to move to first base instead. [[Catcher]]s and corner [[outfielder]]s sometimes move to first base due to deteriorating health or if their fielding abilities at their original position are detrimental to the team.

=== Position ===
Unlike the [[pitcher]] and [[catcher]], who must start every play in a designated area (the pitcher must be on the [[pitcher's mound]], with one foot in contact with the [[pitcher's rubber]], and the catcher must be behind [[home plate]] in the [[catcher's box]]) the first baseman and the other fielders can vary their positioning in response to what they anticipate will be the actions of the batter and runner(s) once play begins.<ref>Baseball Explained by Phillip Mahony. McFarland Books, 2014. See [http://www.baseballexplained.com www.baseballexplained.com]  {{webarchive|url=https://web.archive.org/web/20140813034018/http://www.baseballexplained.com/ |date=August 13, 2014 }}</ref>

When first base is not occupied by a baserunner, the first baseman usually stands behind first base and off the foul line. The distance he plays from the base and [[baseball diamond#Specifications|foul line]] is dependent on the current hitter and any runners on base. The exact position may also depend on the first baseman's experience, preference, and fielding ability. For a known right-handed [[pull hitter]], the first baseman might position himself further towards the second baseman's normal fielding position. For a known left-handed [[pull hitter]], the first baseman will position himself closer to the foul line to stop a ball hit down the line.

To protect against a bunt on the first base side of the infield, the first baseman will position himself in front of the base and move towards the hitter as the pitch is thrown. As soon as the pitcher commits to throwing towards home plate, the first baseman will charge towards the hitter to field the bunt. During these plays, it is the responsibility of the second baseman to cover first base.

With a base runner present at first base, the first baseman stands with their right foot touching the base to prepare for a [[pickoff]] attempt. Once the pitcher commits to throwing towards home plate, the first baseman comes off the bag in front of the runner and gets in a fielding position. If the bases are loaded, or if the runner on first base is not a base stealing threat, the first baseman will position himself behind the runner and appropriate for the current batter.

When waiting for a throw from another player, the first baseman stands with their off-glove foot touching the base, then stretches toward the throw. This stretch decreases the amount of time it takes the throw to get to first and encourages the umpire to call close plays in favor of the fielding team.  Veteran first basemen are known to pull off the bag early on close plays to convince the umpire that the ball reached their glove before the runner reached first base. The first baseman also has the responsibility of cutting off throws from any of the three outfield positions on their way to home plate. Though highly situational, the first baseman usually only receives throws from the center or right fielder.

=== Double play ===
{{Main|Double play}}

The ''first baseman'' is usually at the end of a double play, though he can be at the beginning and end of a double play. Unusual double plays involving the first baseman include the 3–6–3, 3–4–3, 3–2–3, or a 3–6–1 double play. In a 3–6–3 or 3–4–3 double play, the first baseman fields the ball, throws to second, where the shortstop (6) or second baseman (4) catches the ball to make the first out and then throws back to the first baseman who reaches first base in time to tag first base before the batter reaches first base. For a 3–2–3 double play, the bases must be loaded for the [[force play|force-out]] at home plate or the catcher must tag the runner coming from third base out. With a force-out at home plate, the first baseman fields the ball, throws to the catcher, the catcher steps on home plate for the first out, then he throws it back to the first baseman to complete the double play. The 3–2–3 double play with a tag out at home plate is usually not attempted because of the possibility of the catcher not being able to tag the runner and/or block the plate. If the runner at third base is known as a good or fast baserunner, the first basemen will make considerable effort to make sure the third base runner does not advance to home plate for a run by "looking" him back to third base. The primary goal of the first baseman in this instance is to ensure the runner does not advance and that the team records at least one out, especially in a close game. A 3–6–1 double play is almost like a 3–6–3 or a 3–4–3 double play, but the first baseman is usually playing deep in the infield. Here, the first baseman throws the ball to the shortstop covering second, but the pitcher then has the responsibility of covering first base to receive the throw from the shortstop.

A first baseman can theoretically also make an unassisted double play. There are two ways to achieve this. The first is by catching a line drive and returning to first base to tag the base before a baserunner can return. This is rare because the first baseman is usually slower than most baserunners who generally return to their bases on line drives near any fielder. The second is by getting an infield hit to the right when there is a runner on first, tagging the runner and returning to the first base in time to get the man running towards him.