Editing Planimeter (section)

==Construction== 
There are several kinds of planimeters, but all operate in a similar way. The precise way in which they are constructed varies, with the main types of mechanical planimeter being polar, linear, and Prytz or "hatchet" planimeters. The Swiss [[mathematician]] [[Jakob Amsler-Laffon]] built the first modern planimeter in 1854, the concept having been pioneered by Johann Martin Hermann in 1818.<ref>{{cite web |url=https://americanhistory.si.edu/collections/object-groups/planimeters |title=Planimeters }}</ref> Many developments followed Amsler's famous planimeter, including electronic versions.

{{Gallery
|title=Various types of planimeters
|align=center
|Image:Polarplanimeter 01.JPG|Polar planimeter
|Image:Planimeter.png|A planimeter (1908) measuring the indicated area by tracing its perimeter
|Image:Amsler-Polarplanimeter-2.jpg|Amsler polar planimeter
|Image:Planimeter 02.JPG|A linear planimeter. Wheels permit measurement of long areas without restriction.
|File:Three planimeters.JPG|Three planimeters: digital, Prytz's (hatchet) and Amsler's (polar)
|File:Prytz planimeter.JPG|Prytz planimeter with wheel at the left
}}

The Amsler (polar) type consists of a two-bar linkage. At the end of one link is a pointer, used to trace around the boundary of the shape to be measured. The other end of the linkage pivots freely on a weight that keeps it from moving. Near the junction of the two links is a measuring wheel of calibrated diameter, with a scale to show fine rotation, and worm gearing for an auxiliary turns counter scale. As the area outline is traced, this wheel rolls on the surface of the drawing. The operator sets the wheel, turns the counter to zero, and then traces the pointer around the perimeter of the shape. When the tracing is complete, the scales at the measuring wheel show the shape's area.

When the planimeter's measuring wheel moves perpendicular to its axis, it rolls, and this movement is recorded. When the measuring wheel moves parallel to its axis, the wheel skids without rolling, so this movement is ignored. That means the planimeter measures the distance that its measuring wheel travels, projected perpendicularly to the measuring wheel's axis of rotation. The area of the shape is proportional to the number of turns through which the measuring wheel rotates.

The polar planimeter is restricted by design to measuring areas within limits determined by its size and geometry. However, the linear type has no restriction in one dimension, because it can roll. Its wheels must not slip, because the movement must be constrained to a straight line.

Developments of the planimeter can establish the position of the [[first moment of area]] ([[center of mass]]), and even the [[second moment of area]].

{{Gallery
|title=Various types of planimeters
|align=center
|Image:NYW-planimeterLinear.png|Linear planimeter
|Image:NYW-planimeterPolar.png|Polar planimeter
}}

The images show the principles of a linear and a polar planimeter. The pointer M at one end of the planimeter follows the contour C of the surface S to be measured. For the linear planimeter the movement of the "elbow" E is restricted to the ''y''-axis. For the polar planimeter the "elbow" is connected to an arm with its other endpoint O at a fixed position. Connected to the arm ME is the measuring wheel with its axis of rotation parallel to ME. A movement of the arm ME can be decomposed into a movement perpendicular to ME, causing the wheel to rotate, and a movement parallel to ME, causing the wheel to skid, with no contribution to its reading.

{{clear}}