Editing Preferred Roaming List (section)

==PRL structure==
The PRL consists of two tables (along with some header and overhead information):
:*'''Acquisition Table''' – An indexed list of [[frequency|frequencies]] on which the device may search for particular systems. The idea behind the acquisition table is to optimize the acquisition time by identifying only the frequencies that should be searched, rather than searching the entire [[frequency spectrum]]. The information contained in each acquisition table entry includes an index, the network type, and associated channel blocks.
 
:*'''System Table''' – A prioritized list of systems that the device is permitted to access (Preferred Systems) and those that it is explicitly forbidden to access (Negative Systems). Note that it is also possible to indicate forbidden systems using a separate SID/NID Lockout List in the handset; however, this is not a recommended approach as it creates control over system selection outside of the PRL. 
::Each system table entry belongs to a geographic area known as a GEO.  These GEOs are listed in priority order.  Each IS-95/1xRTT system is identified by either SID/NID or, in the case of enhanced PRL, SID/NID or MCC/MNC. To support 1xEV-DO systems, the PRL must be IS-683-C or later.  Each 1xEV-DO system is identified by a Subnet ID.  For hybrid mode operation (i.e. IS-95/1xRTT and 1xEV-DO), association tags are used link an IS-95/1xRTT system with one or more 1xEV-DO systems.  Hybrid systems always attempt to select an IS-95/1xRTT system first, then use the association tag to attempt to select an associated 1xEV-DO system.
::Each entry also provides an acquisition table index where the frequencies associated with that system are identified and a roaming indicator that dictates what type of indication should be displayed to the user when they are receiving service from that system.