Editing Reed switch (section)

==Description==
[[Image:Reedswitch.PNG|thumb|left|333px|Reed switch diagrams from Walter B. Ellwood's 1941 patent,<ref name="Ellwood_1941"/> ''Electromagnetic switch''. It illustrates a single pole, double-throw (SPDT) device. Descriptions from the patent text are as follows:<br /><br />Fig. 1 - device shown in nonoperated position<br />Fig. 2 - device shown in operated position<br />Fig. 3 - cross-section<br /><br />1 - glass envelope<br />2 - terminal<br />3 - resilient magnetic member<br />4 - non-magnetic member<br />5 - conducting member<br />6 - magnetic member<br />7 - insulating piece]]
The most common type of reed switch contains a pair of magnetizable, flexible, metal reeds whose end portions are separated by a small gap when the switch is open. The reeds are hermetically sealed within a tubular glass envelope. Another type of reed switch contains one flexible reed that moves between a fixed normally-open contact and a fixed normally-closed contact. The normally-closed contact is non-ferromagnetic and is closed by the flexible reed's [[spring (device)|spring]] force. Although reed switches with multiple [[switch#Contact terminology|poles]] are possible, more often an assembly of single-pole reed switches is used for multi-pole applications.

A [[magnetic field]] from an electromagnet or a permanent magnet will cause the reeds to attract each other, thus completing an [[electrical network|electrical circuit]]. The [[Spring (device)|spring]] force of the reeds causes them to separate, and open the circuit, when the magnetic field ceases. Another configuration contains a non-[[Ferromagnetism|ferromagnetic]] normally-closed contact that opens when the ferromagnetic normally-open contact closes. A thin layer of non-ferromagnetic material is applied to the reed switch contact area to serve as an [[Electrical contacts|electrical contact]] switching (wear) surface and, for normally-open contacts, as a magnetic spacer whose thickness is important in controlling the magnetic field level at which the contact opens (the drop-out). Reed switch contacts are typically [[rhodium]], [[ruthenium]], [[iridium]], or [[tungsten]]. There are also versions of reed switches with [[Mercury (element)|mercury]]-wetted contacts. Such switches must be mounted in a particular orientation, lest drops of mercury bridge the contacts even when not activated.

Since the contacts of the reed switch are sealed away from the atmosphere, they are protected against [[corrosion|atmospheric corrosion]]. The hermetic sealing of a reed switch make them suitable for use in explosive atmospheres where tiny sparks from conventional switches would constitute a hazard.

One important quality of the switch is its sensitivity, the amount of [[magnetic field]] necessary to actuate it. Sensitivity is measured in units of [[ampere-turn]]s (AT), corresponding to the [[Electric current|current]] in a test coil multiplied by the number of turns in the test coil. Typical pull-in sensitivities for commercial devices are in the 10 to 60 AT range. The lower the AT, the more sensitive the reed switch. Smaller reed switches, which have smaller parts, are generally more sensitive to magnetic fields.

In production, a metal reed is inserted in each end of a glass tube and the ends of the tube are heated so that they seal around a shank portion on the reeds. Green-colored [[infrared]]-absorbing glass is frequently used, so an infrared heat source can concentrate the heat in the small sealing zone of the glass tube. The thermal coefficient of expansion of the glass material and metal parts must be similar to prevent breaking the [[glass-to-metal seal]]. The glass used must have a high [[electrical resistance and conductance|electrical resistance]] and must not contain volatile components, such as [[lead(II) oxide|lead oxide]] and [[fluoride]]s, which can contaminate the contacts during the sealing operation. The leads of the switch must be handled carefully to prevent breaking the glass envelope. The glass envelope can be damaged if the reed switch is subjected to mechanical stress.

Most reed switches are filled with [[nitrogen]] at atmospheric pressure. After the final seal is made, the switch cools and the internal pressure is less than one atmosphere. Reed switches sealed with a pressurized nitrogen atmosphere have a higher [[breakdown voltage]] and are useful for switching 220–240 [[AC voltage|VAC]] [[Mains electricity|mains power]]. Reed switches with a [[vacuum]] inside the glass envelope can switch thousands of [[volts]].

Reed switches can be used to directly switch a variety of loads ranging from nanovolts to kilovolts, femtoamperes to amperes, and [[Direct current|DC]] to [[radio frequency]]. Other magnetically-activated switching devices have a limited range of output voltages and currents, and generally do not directly control a final device such as a [[Electric lamp|lamp]], [[solenoid]], or [[Electric motor|motor]].

Reed switches have small [[Leakage (electronics)|leakage]] currents compared to solid state devices; this may be useful, for example, in medical devices requiring protection of a patient from tiny leakage currents. The reed is hermetically sealed and can therefore operate in almost any environment, such as where flammable gas is present or where corrosion would affect open switch contacts. A reed switch has very low resistance when closed, typically as low as 0.05 [[ohm]]s, whereas the [[Hall effect sensors]] can be in the hundreds of ohms. A reed switch requires only two wires whereas most solid-state devices require three wires. A reed switch can be said to require zero power to operate it.