Editing Shaper (section)

== Process ==
A single-point cutting tool is rigidly held in the tool holder, which is mounted on the ram. The work piece is rigidly held in a vise or clamped directly on the table. The table may be supported at the outer end. The ram reciprocates and the cutting tool, held in the tool holder, moves forwards and backwards over the work piece. In a standard shaper, cutting of material takes place during the forward stroke of the ram and the return stroke remains idle. The return is governed by a [[quick return mechanism]]. The depth of the cut increments by moving the workpiece, and the workpiece is fed by a [[pawl|pawl and ratchet mechanism]].