Editing Sharma speaker (section)

==History==
The name "Sharma" came from Hitchcock's two children, Sharon and Mark.<ref>{{cite web |url=https://groups.google.com/group/alt.music.hammond-organ/tree/browse_frm/month/2002-05/35da1deab8323377?rnum=21&_done=%2Fgroup%2Falt.music.hammond-organ%2Fbrowse_frm%2Fmonth%2F2002-05%3F |title=alt.music.hammond-organ : Sharma}}</ref>{{verify credibility|date=October 2012}}
[[File:Sharma speaker controls.jpg|thumb|left|150px|The control panel on a Sharma 900 speaker. This speaker has been modified to include an external switch control.]]
Hitchcock designed the speaker to directly compete with the Leslie, and consequently it contains similar features, such as a rotating horn for treble frequencies, a drum for bass frequencies, and the same nine-pin [[amphenol connector]] interface as contemporary Leslies then in production. However, unlike a typical Leslie, it includes a treble and bass control, and a [[line level]] input. 

Also, in the Leslie units the horn and bass rotor moved in opposite directions, with a fast and slow motor on each. In the Sharma units, they both rotate in the same direction, with just a fast and slow motor shared.  A clutch allows the top and bottom rotors to accelerate at different rates. 

The amplifier boards were made for Sharma by [[HH Electronics]].{{cn|date=September 2013}} 
Some of the early Sharma speakers had an eight-pin connector. Some models of speaker also contained rotary and stationary speakers, with separate power amplifiers, which were used on non-Hammond organs such as [[Lowrey organ|Lowrey]] or [[Wurlitzer]].<ref name="organforum">{{cite web |url=http://www.organforum.com/forums/archive/index.php?t-19747.html |title=Organ Forum : Can I change the crossover frequency in my Sharma speaker? |accessdate=8 October 2012}}</ref>

Sharma speakers fell out of favour due to the introduction of low-cost electronics that could emulate the rotating speaker sound.{{cn|date=October 2014}}