Editing Stroboscopic effect (section)

==Explanation==
Consider the [[stroboscope]] as used in mechanical analysis. This may be a "[[strobe light]]" that is fired at an adjustable rate. For example, an object is rotating at 60&nbsp;revolutions per second: if it is viewed with a series of short flashes at 60&nbsp;times per second, each flash illuminates the object at the same position in its rotational cycle, so it appears that the object is stationary. Furthermore, at a [[frequency]] of 60&nbsp;flashes per second, [[persistence of vision]] smooths out the sequence of flashes so that the perceived image is continuous.

If the same rotating object is viewed at 61&nbsp;flashes per second, each flash will illuminate it at a slightly earlier part of its rotational cycle. Sixty-one flashes will occur before the object is seen in the same position again, and the series of images will be perceived as if it is rotating backwards once per second.

The same effect occurs if the object is viewed at 59 flashes per second, except that each flash illuminates it a little later in its rotational cycle and so, the object will seem to be rotating forwards.

The same could be applied at other frequencies like the 50&nbsp;Hz characteristic of electric distribution grids of most of countries in the world.

In the case of motion pictures, action is captured as a rapid series of still images and the same stroboscopic effect can occur.

===Audio conversion from light patterns===
The stroboscopic effect also plays a role in audio playback. [[Compact disc]]s rely on strobing reflections of the laser from the surface of the disc in order to be processed (it is also [[CD-ROM|used for computer data]]). [[DVD]]s and [[Blu-ray Disc]]s have similar functions.

The stroboscopic effect also plays a role for [[laser microphone]]s.