Editing Mess kit (section)

====1908 Pattern Mess Tin====
In the First World War, the British Army used a metal, two-piece, kidney shaped mess tin.

The 1874-model was made of tinplated steel and had a "D" plan view with rounded corners. The tray or cup piece had a folding handle that opened to the side. The tray also functioned as a deep lid for the pan. This change from the 1854-model allowed the use of the narrow and tighter curved side of the cup rim for drinking. It also permitted the tray to briefly be held over a fire.  The corners of the square shaped bail were also more rounded.
 
The geometry of the older British mess tins was substantially different. The 1854-model was D-shaped in plan view and was made of tinplated iron. It was fabricated from front and back panels of sheet metal. The tray or cup nested inside the pan. The handle of the tray or cup folded inside but was on the flat "back side" forcing the user to drink from the broadly curved front. The lid was intermediate in depth, could be used as a plate, and set down securely on the pan. The bail was square shaped and the corners were tight curves.
 
The 1810 (1813{{spaced ndash}}14)-model is semicircular or C-shaped in plan view and is made of tinplated iron. The tray of the 1810-model had no handle but nested inside the pan or lower section. The lid covered the pan and had a pull ring for easy removal, but apparently had no other intended use. The bail was curved.