Open main menu
Home
Random
Recent changes
Special pages
Community portal
Preferences
About Wikipedia
Disclaimers
Incubator escapee wiki
Search
User menu
Talk
Dark mode
Contributions
Create account
Log in
Editing
Electric power transmission
(section)
Warning:
You are not logged in. Your IP address will be publicly visible if you make any edits. If you
log in
or
create an account
, your edits will be attributed to your username, along with other benefits.
Anti-spam check. Do
not
fill this in!
== Advantage of high-voltage transmission == {{See also|Ideal transformer}}{{Unreferenced section|date=November 2022}} High-voltage power transmission allows for lesser resistive losses over long distances. This efficiency delivers a larger proportion of the generated power to the loads. [[File:Power split two resistances.svg|thumb|Electrical grid without a transformer]] [[File:Transformer power split.svg|thumb|Electrical grid with a transformer]] In a simplified model, the grid delivers electricity from an [[ideal voltage source]] with voltage <math>V</math>, delivering a power <math>P_V</math>) to a single point of consumption, modelled by a resistance <math>R</math>, when the wires are long enough to have a significant resistance <math>R_C</math>. If the resistances are [[in series]] with no intervening transformer, the circuit acts as a [[voltage divider]], because the same current <math>I=\frac{V}{R+R_C}</math> runs through the wire resistance and the powered device. As a consequence, the useful power (at the point of consumption) is: :<math>P_R= V_2\times I = V\frac{R}{R+R_C}\times\frac{V}{R+R_C} = \frac{R}{R+R_C}\times\frac{V^2}{R+R_C} = \frac{R}{R+R_C} P_V</math> Should an [[ideal transformer]] convert high-voltage, low-current electricity into low-voltage, high-current electricity with a voltage ratio of <math>a</math> (i.e., the voltage is divided by <math>a</math> and the current is multiplied by <math>a</math> in the secondary branch, compared to the primary branch), then the circuit is again equivalent to a voltage divider, but the wires now have apparent resistance of only <math>R_C/a^2</math>. The useful power is then: :<math>P_R= V_2\times I_2 = \frac{a^2R\times V^2}{(a^2 R+R_C)^2} = \frac{a^2 R}{a^2 R+R_C} P_V = \frac{R}{R+R_C/a^2} P_V</math> For <math>a>1</math> (i.e. conversion of high voltage to low voltage near the consumption point), a larger fraction of the generator's power is transmitted to the consumption point and a lesser fraction is lost to [[Joule heating]].
Edit summary
(Briefly describe your changes)
By publishing changes, you agree to the
Terms of Use
, and you irrevocably agree to release your contribution under the
CC BY-SA 4.0 License
and the
GFDL
. You agree that a hyperlink or URL is sufficient attribution under the Creative Commons license.
Cancel
Editing help
(opens in new window)