Open main menu
Home
Random
Recent changes
Special pages
Community portal
Preferences
About Wikipedia
Disclaimers
Incubator escapee wiki
Search
User menu
Talk
Dark mode
Contributions
Create account
Log in
Editing
Stall (fluid dynamics)
(section)
Warning:
You are not logged in. Your IP address will be publicly visible if you make any edits. If you
log in
or
create an account
, your edits will be attributed to your username, along with other benefits.
Anti-spam check. Do
not
fill this in!
===Tip stall=== Wing sweep and taper cause stalling at the [[wing tip|tip of a wing]] before the root. The position of a swept wing along the fuselage has to be such that the lift from the wing root, well forward of the aircraft center of gravity (c.g.), must be balanced by the wing tip, well aft of the c.g.<ref>{{Cite web |url=https://www.flightglobal.com/pdfarchive/view/1964/1964%20-%200018.html |title=Archived copy |access-date=2019-03-06 |archive-date=2019-03-07 |archive-url=https://web.archive.org/web/20190307112308/https://www.flightglobal.com/pdfarchive/view/1964/1964%20-%200018.html |url-status=dead }}</ref> If the tip stalls first the balance of the aircraft is upset causing dangerous nose [[pitch up]]. Swept wings have to incorporate features which prevent pitch-up caused by premature tip stall. A swept wing has a higher lift coefficient on its outer panels than on the inner wing, causing them to reach their maximum lift capability first and to stall first. This is caused by the downwash pattern associated with swept/tapered wings.<ref>Fundamentals Of Flight β Second Edition, Richard S.Shevell, Prentice Hall 1983, {{ISBN|0-13-339060-8}}, p.244</ref> To delay tip stall the outboard wing is given [[Washout (aviation)|washout]] to reduce its angle of attack. The root can also be modified with a suitable leading-edge and airfoil section to make sure it stalls before the tip. However, when taken beyond stalling incidence the tips may still become fully stalled before the inner wing despite initial separation occurring inboard. This causes pitch-up after the stall and entry to a super-stall on those aircraft with super-stall characteristics.<ref>Handling The Big Jets β Third Edition, D.P.Davies, Civil Aviation Authority, p.121</ref> Span-wise flow of the boundary layer is also present on swept wings and causes tip stall. The amount of boundary layer air flowing outboard can be reduced by generating vortices with a leading-edge device such as a fence, notch, saw tooth or a set of vortex generators behind the leading edge.<ref>Flightwise β Principles Of Aircraft Flight, Chris Carpenter 1996, Airlife Publishing Ltd., {{ISBN|1 85310 719 0}}, p.369</ref>
Edit summary
(Briefly describe your changes)
By publishing changes, you agree to the
Terms of Use
, and you irrevocably agree to release your contribution under the
CC BY-SA 4.0 License
and the
GFDL
. You agree that a hyperlink or URL is sufficient attribution under the Creative Commons license.
Cancel
Editing help
(opens in new window)