Editing Logistic function (section)

== Applications ==
=== In ecology: modeling population growth ===
[[File:Pierre Francois Verhulst.jpg|right|thumb|150px|Pierre-François Verhulst (1804–1849)]]
A typical application of the logistic equation is a common model of [[population growth]] (see also [[population dynamics]]), originally due to [[Pierre François Verhulst|Pierre-François Verhulst]] in 1838, where the rate of reproduction is proportional to both the existing population and the amount of available resources, all else being equal. The Verhulst equation was published after Verhulst had read [[Thomas Malthus]]' ''[[An Essay on the Principle of Population]]'', which describes the [[Malthusian growth model]] of simple (unconstrained) exponential growth. Verhulst derived his logistic equation to describe the self-limiting growth of a [[biology|biological]] population. The equation was rediscovered in 1911 by [[Anderson Gray McKendrick|A. G. McKendrick]] for the growth of bacteria in broth and experimentally tested using a technique for nonlinear parameter estimation.<ref name="McKendric Logistic">{{Cite journal | doi = 10.1017/S0370164600025426|journal=Proceedings of the Royal Society of Edinburgh|volume= 31 |date= January 1912|pages= 649–653 |title=XLV.—The Rate of Multiplication of Micro-organisms: A Mathematical Study|author= A. G. McKendricka|author2= M. Kesava Paia1|url=https://zenodo.org/record/1543653}}</ref> The equation is also sometimes called the ''Verhulst-Pearl equation'' following its rediscovery in 1920 by [[Raymond Pearl]] (1879–1940) and [[Lowell Reed]] (1888–1966) of the [[Johns Hopkins University]].<ref>{{cite news|author=Raymond Pearl|author-link=Raymond Pearl|author2=Lowell Reed|author2-link=Lowell Reed|name-list-style=amp|title=On the Rate of Growth of the Population of the United States|url=http://math.bu.edu/people/mak/MA565/Pearl_Reed_PNAS_1920.pdf|date=June 1920|journal=[[Proceedings of the National Academy of Sciences of the United States of America]]|page=275|number=6|volume=6}}</ref> Another scientist, [[Alfred J. Lotka]] derived the equation again in 1925, calling it the ''law of population growth''.

Letting <math>P</math> represent population size (<math>N</math> is often used in ecology instead) and <math>t</math> represent time, this model is formalized by the [[differential equation]]:

<math display="block">\frac{dP}{dt}=r P \left(1 - \frac{P}{K}\right),</math>

where the constant <math>r</math> defines the [[population growth rate|growth rate]] and <math>K</math> is the [[carrying capacity]].

In the equation, the early, unimpeded growth rate is modeled by the first term <math>+rP</math>. The value of the rate <math>r</math> represents the proportional increase of the population <math>P</math> in one unit of time. Later, as the population grows, the modulus of the second term (which multiplied out is <math>-r P^2 / K</math>) becomes almost as large as the first, as some members of the population <math>P</math> interfere with each other by competing for some critical resource, such as food or living space. This antagonistic effect is called the ''bottleneck'', and is modeled by the value of the parameter <math>K</math>. The competition diminishes the combined growth rate, until the value of <math>P</math> ceases to grow (this is called ''maturity'' of the population).
The solution to the equation (with <math>P_0</math> being the initial population) is

<math display="block">P(t) = \frac{K P_0 e^{rt}}{K + P_0 \left( e^{rt} - 1\right)} = \frac{K}{1+\left(\frac{K-P_0}{P_0}\right)e^{-rt}}, </math>

where

<math display="block">\lim_{t\to\infty} P(t) = K,</math>

where <math>K</math> is the limiting value of <math>P</math>, the highest value that the population can reach given infinite time (or come close to reaching in finite time). The carrying capacity is asymptotically reached independently of the initial value <math>P(0) > 0</math>, and also in the case that <math>P(0) > K</math>.

In ecology, [[species]] are sometimes referred to as [[r/K selection theory|<math>r</math>-strategist or <math>K</math>-strategist]] depending upon the [[Natural selection|selective]] processes that have shaped their [[Biological life cycle|life history]] strategies.
[[Dimensional analysis|Choosing the variable dimensions]] so that <math>n</math> measures the population in units of carrying capacity, and <math>\tau</math> measures time in units of <math>1/r</math>, gives the dimensionless differential equation

<math display="block">\frac{dn}{d\tau} =  n (1-n).</math>

==== Integral ====
The [[antiderivative]] of the ecological form of the logistic function can be computed by the [[Integration by substitution|substitution]] <math>u = K + P_0 \left( e^{rt} - 1\right)</math>, since <math>du = r P_0 e^{rt} dt</math>

<math display="block">\int \frac{K P_0 e^{rt}}{K + P_0 \left( e^{rt} - 1\right)}\,dt = \int \frac{K}{r} \frac{1}{u}\,du = \frac{K}{r} \ln u + C = \frac{K}{r} \ln \left(K + P_0 (e^{rt} - 1) \right) + C</math>

==== Time-varying carrying capacity ====
Since the environmental conditions influence the carrying capacity, as a consequence it can be time-varying, with <math>K(t) > 0</math>, leading to the following mathematical model:

<math display="block">\frac{dP}{dt} = rP \cdot \left(1 - \frac{P}{K(t)}\right).</math>

A particularly important case is that of carrying capacity that varies periodically with period <math>T</math>:

<math display="block">K(t + T) = K(t).</math>

It can be shown<ref>{{Cite journal |last1=Griffiths |first1=Graham |last2=Schiesser |first2=William |date=2009 |title=Linear and nonlinear waves |journal=Scholarpedia |language=en |volume=4 |issue=7 |page=4308 |doi=10.4249/scholarpedia.4308 |bibcode=2009SchpJ...4.4308G |issn=1941-6016|doi-access=free }}</ref> that in such a case, independently from the initial value <math>P(0) > 0</math>, <math>P(t)</math> will tend to a unique periodic solution <math>P_*(t)</math>, whose period is <math>T</math>.

A typical value of <math>T</math> is one year: In such case <math>K(t)</math> may reflect periodical variations of weather conditions.

Another interesting generalization is to consider that the carrying capacity <math>K(t)</math> is a function of the population at an earlier time, capturing a delay in the way population modifies its environment. This leads to a logistic delay equation,<ref name="delay carrying">{{Cite journal | last1 = Yukalov | first1 = V. I. | last2 = Yukalova | first2 = E. P. | last3 = Sornette | first3 = D. | s2cid = 14456352 | doi = 10.1016/j.physd.2009.05.011 | title = Punctuated evolution due to delayed carrying capacity | journal = Physica D: Nonlinear Phenomena | volume = 238 | issue = 17 | pages = 1752–1767 | year = 2009 | arxiv = 0901.4714 | bibcode = 2009PhyD..238.1752Y }}</ref> which has a very rich behavior, with bistability in some parameter range, as well as a monotonic decay to zero, smooth exponential growth, punctuated unlimited growth (i.e., multiple S-shapes), punctuated growth or alternation to a stationary level, oscillatory approach to a stationary level, sustainable oscillations, finite-time singularities as well as finite-time death.

=== In statistics and machine learning ===
Logistic functions are used in several roles in statistics. For example, they are the [[cumulative distribution function]] of the [[Logistic distribution|logistic family of distributions]], and they are, a bit simplified, used to model the chance a chess player has to beat their opponent in the [[Elo rating system]]. More specific examples now follow.

==== Logistic regression ====
{{Main|Logistic regression}}

Logistic functions are used in [[logistic regression]] to model how the probability <math>p</math> of an event may be affected by one or more [[explanatory variables]]: an example would be to have the model

<math display="block">p = f(a + bx),</math>

where <math>x</math> is the explanatory variable, <math>a</math> and <math>b</math> are model parameters to be fitted, and <math>f</math> is the standard logistic function.

Logistic regression and other [[log-linear model]]s are also commonly used in [[machine learning]]. A generalisation of the logistic function to multiple inputs is the [[softmax activation function]], used in [[multinomial logistic regression]].

Another application of the logistic function is in the [[Rasch model]], used in [[item response theory]]. In particular, the Rasch model forms a basis for [[maximum likelihood]] estimation of the locations of objects or persons on a [[Continuum (theory)|continuum]], based on collections of [[categorical variable|categorical data]], for example the abilities of persons on a continuum based on responses that have been categorized as correct and incorrect.

==== Neural networks ====
Logistic functions are often used in [[artificial neural network]]s to introduce [[nonlinearity]] in the model or to clamp signals to within a specified [[interval (mathematics)|interval]].  A popular [[artificial neuron|neural net element]] computes a [[linear combination]] of its input signals, and applies a bounded logistic function as the [[activation function]] to the result; this model can be seen as a "smoothed" variant of the classical [[perceptron|threshold neuron]].<!--

A reason for its popularity in neural networks is because the logistic function satisfies the differential equation

<math display="block">y' = y(1-y).</math>

The right hand side is a low-degree polynomial. Furthermore, the polynomial has factors <math>y</math> and <math>1 − y</math>, both of which are simple to compute. Given <math>y = sig(t)</math> at a particular <math>t</math>, the derivative of the logistic function at that <math>t</math> can be obtained by multiplying the two factors together. -->

A common choice for the activation or "squashing" functions, used to clip large magnitudes to keep the response of the neural network bounded,<ref name="Gershenfeld-1999">Gershenfeld 1999, p. 150.</ref> is

<math display="block">g(h) = \frac{1}{1 + e^{-2 \beta h}},</math>

which is a logistic function.

These relationships result in simplified implementations of [[artificial neural network]]s with [[artificial neuron]]s. Practitioners caution that sigmoidal functions which are [[Odd functions|antisymmetric]] about the origin (e.g. the [[hyperbolic tangent]]) lead to faster convergence when training networks with [[backpropagation]].<ref name="LeCun-1998">{{cite book | author1 = LeCun, Y. | author2 = Bottou, L. | author3 = Orr, G. | author4 = Muller, K. | editor = Orr, G. | editor2 = Muller, K. | year = 1998 | contribution = Efficient BackProp | title = Neural Networks: Tricks of the trade | isbn = 3-540-65311-2 | publisher = Springer | contribution-url = http://yann.lecun.com/exdb/publis/pdf/lecun-98b.pdf | archive-date = 31 August 2018 | access-date = 16 September 2009 | archive-url = https://web.archive.org/web/20180831075352/http://yann.lecun.com/exdb/publis/pdf/lecun-98b.pdf | url-status = dead }}</ref>

The logistic function is itself the derivative of another proposed activation function, the [[softplus]].

=== In medicine: modeling of growth of tumors ===
{{See also|Gompertz curve#Growth of tumors}}
Another application of logistic curve is in medicine, where the logistic differential equation can be used to model the growth of [[neoplasm|tumors]]. This application can be considered an extension of the above-mentioned use in the framework of ecology (see also the [[Generalized logistic curve]], allowing for more parameters). Denoting with <math>X(t)</math> the size of the tumor at time <math>t</math>, its dynamics are governed by

<math display="block">X' = r\left(1 - \frac X K \right)X,</math>

which is of the type

<math display="block">X' = F(X)X, \quad F'(X) \le 0,</math>

where <math>F(X)</math> is the proliferation rate of the tumor.

If a course of [[chemotherapy]] is started with a log-kill effect, the equation may be revised to be

<math display="block">X' = r\left(1 - \frac X K \right)X - c(t) X,</math>

where <math>c(t)</math> is the therapy-induced death rate. In the idealized case of very long therapy, <math>c(t)</math> can be modeled as a periodic function (of period <math>T</math>) or (in case of continuous infusion therapy) as a constant function, and one has that

<math display="block">\frac 1 T \int_0^T c(t)\, dt > r \to \lim_{t \to +\infty} x(t) = 0,</math>

i.e. if the average therapy-induced death rate is greater than the baseline proliferation rate, then there is the eradication of the disease. Of course, this is an oversimplified model of both the growth and the therapy. For example, it does not take into account the evolution of clonal resistance, or the side-effects of the therapy on the patient. These factors can result in the eventual failure of chemotherapy, or its discontinuation.{{citation needed|date=February 2025}}

=== In medicine: modeling of a pandemic ===
{{main|Compartmental models in epidemiology}}
A novel infectious pathogen to which a population has no immunity will generally spread exponentially in the early stages, while the supply of susceptible individuals is plentiful.  The SARS-CoV-2 virus that causes [[COVID-19]] exhibited exponential growth early in the course of infection in several countries in early 2020.<ref>[https://www.worldometers.info/coronavirus/ Worldometer: COVID-19 CORONAVIRUS PANDEMIC]</ref> Factors including a lack of susceptible hosts (through the continued spread of infection until it passes the threshold for [[herd immunity]]) or reduction in the accessibility of potential hosts through physical distancing measures, may result in exponential-looking epidemic curves first linearizing (replicating the "logarithmic" to "logistic" transition first noted by [[Pierre François Verhulst|Pierre-François Verhulst]], as noted above) and then reaching a maximal limit.<ref>{{Cite arXiv |eprint = 2004.02406|last1 = Villalobos-Arias|first1 = Mario|title = Using generalized logistics regression to forecast population infected by Covid-19|year = 2020|class = q-bio.PE}}</ref>

A logistic function, or related functions (e.g. the [[Gompertz function]]) are usually used in a descriptive or phenomenological manner because they fit well not only to the early exponential rise, but to the eventual levelling off of the pandemic as the population develops a herd immunity. This is in contrast to actual models of pandemics which attempt to formulate a description based on the dynamics of the pandemic (e.g. contact rates, incubation times, social distancing, etc.). Some simple models have been developed, however, which yield a logistic solution.<ref>{{cite journal |last1=Postnikov |first1=Eugene B. |date=June 2020 |title=Estimation of COVID-19 dynamics "on a back-of-envelope": Does the simplest SIR model provide quantitative parameters and predictions? |url= |journal=Chaos, Solitons & Fractals |volume=135 |page=109841 |doi=10.1016/j.chaos.2020.109841 |pmid=32501369 |pmc=7252058 <!--|access-date=July 20, 2020-->|bibcode=2020CSF...13509841P }}</ref><ref>{{Cite medRxiv |last1=Saito |first1=Takesi |date=June 2020 |title=A Logistic Curve in the SIR Model and Its Application to Deaths by COVID-19 in Japan |medrxiv=10.1101/2020.06.25.20139865v2}}</ref><ref name="Reiser2020">{{cite arXiv|eprint=2006.01550 |last1=Reiser |first1=Paul A. |title=Modified SIR Model Yielding a Logistic Solution |year=2020 |class=q-bio.PE }}</ref>

==== Modeling early COVID-19 cases ====
[[File:Combined GLF.jpg|class=skin-invert-image|400px|thumb|[[Generalized logistic function]] (Richards growth curve) in epidemiological modeling]]
A [[generalized logistic function]], also called the Richards growth curve, has been applied to model the early phase of the [[COVID-19]] outbreak.<ref>{{Cite journal |last1=Lee|first1=Se Yoon |first2=Bowen |last2=Lei|first3=Bani|last3=Mallick|  title = Estimation of COVID-19 spread curves integrating global data and borrowing information|journal=PLOS ONE|year=2020|volume=15 |issue=7 |pages=e0236860 |doi=10.1371/journal.pone.0236860|pmid=32726361 |pmc=7390340 |arxiv=2005.00662 |bibcode=2020PLoSO..1536860L |doi-access=free}}</ref> The authors fit the generalized logistic function to the cumulative number of infected cases, here referred to as ''infection trajectory''. There are different parameterizations of the [[generalized logistic function]] in the literature. One frequently used forms is

<math display="block"> f(t ; \theta_1,\theta_2,\theta_3, \xi) = \frac{\theta_1}{{\left[1 + \xi \exp \left(-\theta_2 \cdot (t - \theta_3) \right) \right]}^{1/\xi}}</math>

where <math>\theta_1,\theta_2,\theta_3</math> are real numbers, and <math> \xi </math> is a positive real number. The flexibility of the curve <math>f</math> is due to the parameter <math> \xi </math>: (i) if <math> \xi = 1 </math> then the curve reduces to the logistic function, and (ii) as <math> \xi </math> approaches zero, the curve converges to the [[Gompertz function]]. In epidemiological modeling, <math>\theta_1</math>, <math>\theta_2</math>, and <math>\theta_3</math> represent the final epidemic size, infection rate, and lag phase, respectively. See the right panel for an example infection trajectory when <math>(\theta_1,\theta_2,\theta_3)</math> is set to <math>(10000,0.2,40)</math>.
[[File:COVID_19_Outbreak.jpg|class=skin-invert-image|right|thumb|400x400px|Extrapolated infection trajectories of 40 countries severely affected by COVID-19 and grand (population) average through May 14th]]
One of the benefits of using a growth function such as the [[generalized logistic function]] in epidemiological modeling is its relatively easy application to the [[multilevel model]] framework, where information from different geographic regions can be pooled together.

=== In chemistry: reaction models ===
The concentration of reactants and products in [[autocatalysis|autocatalytic reactions]] follow the logistic function.
The degradation of [[Platinum group]] metal-free (PGM-free) oxygen reduction reaction (ORR) catalyst in fuel cell cathodes follows the logistic decay function,<ref>{{cite journal |last1=Yin |first1=Xi |last2=Zelenay |first2=Piotr |title=Kinetic Models for the Degradation Mechanisms of PGM-Free ORR Catalysts |journal=ECS Transactions |date=13 July 2018 |volume=85 |issue=13 |pages=1239–1250 |doi=10.1149/08513.1239ecst|osti=1471365 |s2cid=103125742 |url=https://www.osti.gov/biblio/1471365 }}</ref> suggesting an autocatalytic degradation mechanism.

=== In physics: Fermi–Dirac distribution ===
The logistic function determines the statistical distribution of fermions over the energy states of a system in thermal equilibrium. In particular, it is the distribution of the probabilities that each possible energy level is occupied by a fermion, according to [[Fermi function|Fermi–Dirac statistics]].

=== In optics: mirage ===
The logistic function also finds applications in optics, particularly in modelling phenomena such as [[Mirage|mirages]]. Under certain conditions, such as the presence of a temperature or concentration gradient due to diffusion and balancing with gravity, logistic curve behaviours can emerge.<ref name="Measuring refractive index gradient of sugar solution">{{cite journal |last1=Tanalikhit |first1=Pattarapon |last2=Worakitthamrong |first2=Thanabodi |last3=Chaidet |first3=Nattanon |last4=Kanchanapusakit |first4=Wittaya |title=Measuring refractive index gradient of sugar solution |journal=Journal of Physics: Conference Series |date=24-25 May 2021 |volume=2145 |issue=1 |page=012072 |doi=10.1088/1742-6596/2145/1/012072 |s2cid=245811843 |doi-access=free |bibcode=2021JPhCS2145a2072T }}</ref><ref>{{cite journal |last1=López-Arias |first1=T |last2=Calzà |first2=G |last3=Gratton |first3=L M |last4=Oss |first4=S |title=Mirages in a bottle |journal=Physics Education |date=2009 |volume=44 |issue=6 |pages=582 |doi=10.1088/0031-9120/44/6/002 |bibcode=2009PhyEd..44..582L |s2cid=59380632 |url=https://iopscience.iop.org/article/10.1088/0031-9120/44/6/002 }}</ref>

A mirage, resulting from a temperature gradient that modifies the refractive index related to the density/concentration of the material over distance, can be modelled using a fluid with a refractive index gradient due to the concentration gradient. This mechanism can be equated to a limiting population growth model, where the concentrated region attempts to diffuse into the lower concentration region, while seeking equilibrium with gravity, thus yielding a logistic function curve.<ref name="Measuring refractive index gradient of sugar solution"/>

===In material science: phase diagrams===
See [[Diffusion bonding]].

=== In linguistics: language change ===
In linguistics, the logistic function can be used to model [[language change]]:<ref name="probabilistic linguistics">Bod, Hay, Jennedy (eds.) 2003, pp. 147–156</ref> an innovation that is at first marginal begins to spread more quickly with time, and then more slowly as it becomes more universally adopted.

=== In agriculture: modeling crop response ===
The logistic S-curve can be used for modeling the crop response to changes in growth factors. There are two types of response functions:  ''positive''  and ''negative'' growth curves. For example, the crop yield may ''increase'' with increasing value of the growth factor up to a certain level (positive function), or it may ''decrease'' with increasing growth factor values (negative function owing to a negative growth factor), which situation requires an ''inverted'' S-curve.
{{multiple image
| perrow            = 2
| width1            = 300px
| width2            = 300px
| image1            = Sugarcane S-curve.png
| caption1          = S-curve model for crop yield versus depth of [[water table]]<ref>Collection of data on crop production and depth of the water table in the soil of various authors. On line: [https://www.waterlog.info/cropwat.htm]</ref>
| image2            = Barley S-curve.png
| caption2          = Inverted S-curve model for crop yield versus [[soil salinity]]<ref>Collection of data on crop production and soil salinity of various authors. On line: [https://www.waterlog.info/croptol.htm]</ref>
}}

=== In economics and sociology: diffusion of innovations ===
The logistic function can be used to illustrate the progress of the [[Diffusion of innovations|diffusion of an innovation]] through its life cycle.

In ''The Laws of Imitation'' (1890), [[Gabriel Tarde]] describes the rise and spread of new ideas through imitative chains. In particular, Tarde identifies three main stages through which innovations spread: the first one corresponds to the difficult beginnings, during which the idea has to struggle within a hostile environment full of opposing habits and beliefs; the second one corresponds to the properly exponential take-off of the idea, with <math>f(x)=2^x</math>; finally, the third stage is logarithmic, with <math>f(x)=\log(x)</math>, and corresponds to the time when the impulse of the idea gradually slows down while, simultaneously new opponent ideas appear. The ensuing situation halts or stabilizes the progress of the innovation, which approaches an asymptote.

In a [[sovereign state]], the subnational units (constituent states or cities) may use loans to finance their projects. However, this funding source is usually subject to strict legal rules as well as to economy [[scarcity]] constraints, especially the resources the banks can lend (due to their [[Equity (finance)|equity]] or [[Basel III|Basel]] limits). These restrictions, which represent a saturation level, along with an exponential rush in an [[Competition (economics)|economic competition]] for money, create a [[public finance]] diffusion of credit pleas and the aggregate national response is a [[sigmoid curve]].<ref>{{Cite journal|last1=Rocha|first1=Leno S.|last2=Rocha|first2=Frederico S. A.|last3=Souza|first3=Thársis T. P.|date=5 October 2017|title=Is the public sector of your country a diffusion borrower? Empirical evidence from Brazil|journal=PLOS ONE|language=en|volume=12|issue=10|pages=e0185257|doi=10.1371/journal.pone.0185257|issn=1932-6203|pmc=5628819|pmid=28981532|arxiv=1604.07782|bibcode=2017PLoSO..1285257R|doi-access=free}}</ref>

Historically, when new products are introduced there is an intense amount of [[research and development]] which leads to dramatic improvements in quality and reductions in cost.  This leads to a period of rapid industry growth. Some of the more famous examples are: railroads, incandescent light bulbs, [[electrification]], cars and air travel. Eventually, dramatic improvement and cost reduction opportunities are exhausted, the product or process are in widespread use with few remaining potential new customers, and markets become saturated.

Logistic analysis was used in papers by several researchers at the International Institute of Applied Systems Analysis ([[IIASA]]). These papers deal with the diffusion of various innovations, infrastructures and energy source substitutions and the role of work in the economy as well as with the long economic cycle. Long economic cycles were investigated by Robert Ayres (1989).<ref>{{cite web
 | last1 = Ayres
 | first1 = Robert
 | author1-link = Robert Ayres (scientist)
 | title = Technological Transformations and Long Waves
 |date=February 1989
 | url = http://www.iiasa.ac.at/Admin/PUB/Documents/RR-89-001.pdf
 |website=International Institute for Applied Systems Analysis 
 | access-date = 6 November 2010
 | archive-date = 1 March 2012
 | archive-url = https://web.archive.org/web/20120301220936/http://www.iiasa.ac.at/Admin/PUB/Documents/RR-89-001.pdf
 }}</ref> Cesare Marchetti published on [[Kondratiev wave|long economic cycles]] and on diffusion of innovations.<ref>{{cite web
 |last1       = Marchetti
 |first1      = Cesare
 |title       = Pervasive Long Waves: Is Society Cyclotymic
 |year        = 1996
 |url         = http://www.agci.org/dB/PDFs/03S2_CMarchetti_Cyclotymic.pdf
|website=Aspen Global Change INstitute
 |archive-url  = https://web.archive.org/web/20120305095553/http://www.agci.org/dB/PDFs/03S2_CMarchetti_Cyclotymic.pdf
 |archive-date = 5 March 2012
}}</ref><ref>{{cite web
 | last1 = Marchetti
 | first1 = Cesare
 | title = Kondratiev Revisited-After One Cycle
 | year = 1988
 | url = http://www.cesaremarchetti.org/archive/scan/MARCHETTI-037.pdf
 | website = Cesare Marchetti
 | access-date = 6 November 2010
 | archive-date = 9 March 2012
 | archive-url = https://web.archive.org/web/20120309092521/http://www.cesaremarchetti.org/archive/scan/MARCHETTI-037.pdf
 | url-status = dead
 }}</ref> Arnulf Grübler's book (1990) gives a detailed account of the diffusion of infrastructures including canals, railroads, highways and airlines, showing that their diffusion followed logistic shaped curves.<ref name="Grubler1990">{{cite book
 | last1 = Grübler
 | first1 = Arnulf
 | title = The Rise and Fall of Infrastructures: Dynamics of Evolution and Technological Change in Transport
 | year = 1990
|publisher=Physica-Verlag
|location= Heidelberg and New York
 | url = http://pure.iiasa.ac.at/id/eprint/3351/1/XB-90-704.pdf
 }}</ref>

Carlota Perez used a logistic curve to illustrate the long ([[Kondratiev wave|Kondratiev]]) business cycle with the following labels: beginning of a technological era as ''irruption'', the ascent as ''frenzy'', the rapid build out as ''synergy'' and the completion as ''maturity''.<ref name="Perez2002">{{cite book |title= Technological Revolutions and Financial Capital: The Dynamics of Bubbles and Golden Ages
|last1=Perez
|first1= Carlota
|year=2002 |publisher= Edward Elgar Publishing Limited |location=UK  |isbn=1-84376-331-1  |url=https://archive.org/details/technologicalrev00carl|url-access= registration
}}</ref>

=== Inflection Point Determination in Logistic Growth Regression ===
Logistic growth regressions carry significant uncertainty when data is available only up to around the inflection point of the growth process. Under these conditions, estimating the height at which the inflection point will occur may have uncertainties comparable to the carrying capacity (K) of the system.

A method to mitigate this uncertainty involves using the carrying capacity from a surrogate logistic growth process as a reference point.<ref>{{cite journal |last1=Vieira |first1=B.H. |last2=Hiar |first2=N.H. |last3=Cardoso |first3=G.C. |title=Uncertainty Reduction in Logistic Growth Regression Using Surrogate Systems Carrying Capacities: a COVID-19 Case Study |journal=Brazilian Journal of Physics |volume=52 |pages=15 |year=2022 |issue=1 |doi=10.1007/s13538-021-01010-6 |doi-access=free |bibcode=2022BrJPh..52...15V |pmc=8631260 }}</ref> By incorporating this constraint, even if K is only an estimate within a factor of two, the regression is stabilized, which improves accuracy and reduces uncertainty in the prediction parameters. This approach can be applied in fields such as economics and biology, where analogous surrogate systems or populations are available to inform the analysis.

===Sequential analysis===
Link<ref name="A sequential theory of psychological discrimination">{{cite journal|first1=S. W.|last1= Link|journal= Psychometrika|date = 1975|volume= 40|issue= 1 |pages= 77–105|first2= R. A.|last2= Heath|title = A sequential theory of psychological discrimination|doi = 10.1007/BF02291481}}</ref> created an extension of [[Wald's equation |Wald's theory]] of sequential analysis to a distribution-free accumulation of random variables until either a positive or negative bound is first equaled or exceeded. Link<ref name="The Relative Judgment Theory of the Psychometric Function">{{cite book|first=S. W. |last=Link|title= Attention and Performance VII|date= 1978 |pages = 619–630|chapter = The Relative Judgment Theory of the Psychometric Function |publisher = Taylor & Francis|isbn =9781003310228}}</ref> derives the probability of first equaling or exceeding the positive boundary as <math>1/(1+e^{-\theta A})</math>, the logistic function. This is the first proof that the logistic function may have a stochastic process as its basis. Link<ref name="The wave theory of difference and similarity">S. W. Link, The wave theory of difference and similarity (book), Taylor and Francis, 1992</ref> provides a century of examples of "logistic" experimental results and a newly derived relation between this probability and the time of absorption at the boundaries.