Editing Measuring network throughput (section)

====MPLS====

Multiprotocol Label Switching (MPLS) adds a standard tag or header known as a 'label' to existing packets of data. In certain situations it is possible to use MPLS in a 'stacked' manner, so that labels are added to packets that have already been labelled. Connections between MPLS systems can also be 'native', with no underlying transport protocol, or MPLS labelled packets can be carried inside frame relay or HDLC packets as payloads. Correct throughput calculations need to take such configurations into account. For example, a data packet could have two MPLS labels attached via 'label-stacking', then be placed as payload inside an HDLC frame. This generates more overhead that has to be taken into account that a single MPLS label attached to a packet which is then sent 'natively', with no underlying protocol to a receiving system.<ref>Smith, S. (2003). Introductions To MPLS. CISCO</ref>