Editing Quantization (signal processing) (section)

===Granular distortion and overload distortion===
Often the design of a quantizer involves supporting only a limited range of possible output values and performing clipping to limit the output to this range whenever the input exceeds the supported range. The error introduced by this clipping is referred to as ''overload'' distortion.  Within the extreme limits of the supported range, the amount of spacing between the selectable output values of a quantizer is referred to as its ''granularity'', and the error introduced by this spacing is referred to as ''granular'' distortion.  It is common for the design of a quantizer to involve determining the proper balance between granular distortion and overload distortion. For a given supported number of possible output values, reducing the average granular distortion may involve increasing the average overload distortion, and vice versa.  A technique for controlling the amplitude of the signal (or, equivalently, the quantization step size <math>\Delta</math>) to achieve the appropriate balance is the use of ''[[automatic gain control]]'' (AGC). However, in some quantizer designs, the concepts of granular error and overload error may not apply (e.g., for a quantizer with a limited range of input data or with a countably infinite set of selectable output values).<ref name=GrayNeuhoff/>