Editing Dynamic range compression (section)

=== Voice ===
A compressor can be used to reduce [[sibilance]] ('ess' sounds) in vocals ([[de-essing]]) by feeding the compressor's side-chain an [[Equalization (audio)|equalized]] version of the input signal, so that specific, sibilance-related frequencies (typically 4000 to 8000 hz) activate the compressor more.<ref>{{cite magazine|url=https://www.soundonsound.com/techniques/techniques-vocal-de-essing|title=Techniques For Vocal De-essing|magazine=Sound on Sound|date=May 2009|access-date=12 May 2010}}</ref>

Compression is used in voice communications in [[amateur radio]] that employ [[single-sideband modulation|single-sideband (SSB) modulation]] to make a particular station's signal more readable to a distant station, or to make one's station's transmitted signal stand out against others.  This is applicable especially in [[DXing]]. An SSB signal's strength depends on the level of [[modulation]]. A compressor increases the average level of the modulation signal thus increasing the transmitted signal strength. Most modern amateur radio SSB transceivers have speech compressors built-in. Compression is also used in [[Two-way radio|land mobile radio]], especially in transmitted audio of professional [[walkie-talkie]]s and [[Tone remote|remote control dispatch consoles]].<ref>{{Cite book |title=HF radio systems & circuits |publisher=Noble Pub |year=1998 |isbn=9781613530740 |editor-last=Sabin |editor-first=William E. |edition=2nd |location=Atlanta |pages=13–25, 271–290 |oclc=842936687 |editor-last2=Schoenike |editor-first2=Edgar O.}}</ref>