Editing Laser engraving (section)

===Direct photopolymer laser imaging===
Closely related{{clarify|reason=…to "direct laser engraving of flexographic cylinders"?|date=November 2019}} is the direct imaging of a digital flexo plates or sleeves "in the round" on a fast-rotating drum or cylinder. This is carried out on a platesetter integrated within a digital prepress workflow that also supports digital proofing. Again, this is a filmless process, which removes one of the variables in obtaining the fine and sharp dots for screened effects, including process color printing.

With this process, the electronically generated image is scanned at speed to a photopolymer plate material that carries a thin black mask layer on the surface. The infrared laser-imaging head, which runs parallel to the drum axis, ablates the integral mask to reveal the uncured polymer underneath. A main ultraviolet exposure follows to form the image through the mask. The remaining black layer absorbs the ultraviolet radiation, which [[polymer]]izes the underlying photopolymer where the black layer has been removed. The exposed digital plate still needs to be processed like a conventional flexo plate. That is, using solvent-based washout with the necessary waste recovery techniques, although some water-washable digital plates are in development. This technology has been used since 1995 and is only now becoming more widely used around the world as more affordable equipment becomes available. Trade sources{{who|date=March 2024}} say there are around 650 digital platesetters installed in label, packaging and trade platemaking houses.