Editing Wave interference (section)

==== Radio interferometry ====
{{Main|Astronomical interferometer}}

[[File:USA.NM.VeryLargeArray.02.jpg|thumb|The [[Very Large Array]], an [[interferometer|interferometric array]] formed from many smaller [[telescope]]s, like many larger [[radio telescope]]s.]]
In 1946, a technique called [[Astronomical interferometer|astronomical interferometry]] was developed. Astronomical radio interferometers usually consist either of arrays of parabolic dishes or two-dimensional arrays of omni-directional antennas. All of the telescopes in the array are widely separated and are usually connected together using [[coaxial cable]], [[waveguide]], [[optical fiber]], or other type of [[transmission line]]. Interferometry increases the total signal collected, but its primary purpose is to vastly increase the resolution through a process called [[Aperture synthesis]]. This technique works by superposing (interfering) the signal waves from the different telescopes on the principle that waves that coincide with the same phase will add to each other while two waves that have opposite phases will cancel each other out. This creates a combined telescope that is equivalent in resolution (though not in sensitivity) to a single antenna whose diameter is equal to the spacing of the antennas farthest apart in the array.