Editing Structural engineering (section)

===Plates===
{{Main|Plate (structure)}}

Plates carry bending in two directions. A concrete flat slab is an example of a plate. Plate behavior is based on [[continuum mechanics]]. Due to the complexity involved they are most often analyzed using a finite element analysis. 

They can also be designed with yield line theory, where an assumed collapse mechanism is analyzed to give an upper bound on the collapse load. This technique is used in practice<ref>{{cite web |title=Assessment of a Pair of Reinforced Concrete Roof Slabs |url=http://www.ramsay-maunder.co.uk/downloads/precast_roof_slabs.pdf |website=Ramsay-Maunder.co.uk |publisher=Ramsay Maunder Associates |date=2011 |access-date=2022-03-08 }}</ref> but because the method provides an upper-bound (i.e. an unsafe prediction of the collapse load) for poorly conceived collapse mechanisms, great care is needed to ensure that the assumed collapse mechanism is realistic.<ref>{{cite web |url=http://www.ramsay-maunder.co.uk/downloads/l_shaped_landing.pdf |title=Reappraisal of a Simply Supported Landing Slab |website=Ramsay-Maunder.co.uk |publisher=Ramsay Maunder Associates |url-status=live |archive-url=https://web.archive.org/web/20160304071038/http://www.ramsay-maunder.co.uk/downloads/l_shaped_landing.pdf |date=2011 |archive-date=2016-03-04 |access-date=2022-03-08 }}</ref>