Editing Case modding (section)

==Console case modding==

[[File:Gold Xbox.jpg|thumb|300px|An example of an Xbox 360 case mod]]
''Console case modding'' refers to the modification of the case of a game console. The most common consoles to modify are the Xbox and Xbox 360, because there is much more room inside to customize them with items such as lights and fans. Moreover, the Xbox 360 requires additional cooling over the factory configuration to avoid [[Xbox 360 technical problems|overheating issues]] due to the use of the wrong type of lead-free solder, which was not capable of handling the temperature limits standard solder can.<ref>{{cite news|title=Coolest electronic gear way too hot for its own good|work=Chicago Tribune|date=August 13, 2007|author=Alex Pham|author2=Dawn Chmielewski|page=D5}}</ref><ref>{{cite web|url=http://www.theinquirer.net/inquirer/news/1040835/bbc-watchdog-reviews-xbox-360-ring-death |archive-url=https://web.archive.org/web/20120925202745/http://www.theinquirer.net/inquirer/news/1040835/bbc-watchdog-reviews-xbox-360-ring-death |url-status=unfit |archive-date=September 25, 2012 |title=Bbc watchdog reviews xbox 360 ring-of-death |publisher=The Inquirer |date= |access-date=2011-10-31}}</ref> These consoles and their controllers are also relatively easy to take apart. For those who do not wish to scratch-build mods, there are several companies that sell transparent Xbox cases and various cooling/lighting equipment for them.

Console case modding started in the late 1980s when the [[Nintendo Entertainment System|NES]] and [[Sega Mega Drive|Sega Genesis]], were released; many customers simply put pictures or stickers on them until the [[PlayStation]] was released. Many case modders started to change hardware, for example by altering them to play copied games (known as 'chipping' the games console). The most common modification for the PlayStation was the 'chipping' process (mentioned above). When the [[Nintendo 64]], [[Dreamcast]] and [[PlayStation 2]] were released, many chipped them, styled them, and added additional cooling; some went as far as changing the hardware itself. When the [[Xbox (console)|Xbox]] and [[Xbox 360]] were released, many modders personally customized them further, using neon lights, transparent cases, fans, and PC hard drives (as opposed to Xbox-branded drives). Many modders found that altering the interior of Xbox 360s was difficult due to absence of a power cable (normally in a PC, this cord attaches the hard disk drive to its motherboard). Despite shortcomings, modders also found a way to power neon lighting and other powered equipment by using the DVD-ROM power supply; however, due to insufficient power to the hard disk drive, it often caused freezing during disk access. Another common method for internal case modding uses the power outlet for the internal fan by splitting the cord with a "Y" connector.  However, the most up to date modders will use power points under where the PSU (power supply) plugs in, which doesn't diminish any (or very little) power from the console.