Editing Cymbal making (section)

==Modern developments==

Each stage of this process has been modified by the use of recent technology.

One of the main effects has been that far closer manufacturing tolerances can be achieved, resulting in more consistent sounding cymbals.

This has also provided the opportunity to omit some of the traditional steps completely, and so unlathed, partly lathed, and even unhammered cymbals have entered the catalogs of major makers, and achieved widespread acceptance.

===Modern casting techniques===

====Rotocasting====

The more unusual of these is [[centrifugal casting (industrial)|rotocasting]], in which the mold is spun to force metal into the details of the mold by [[centrifugal force]]. This allows the hot forging step to be reduced or even omitted, as the resulting casting can be made far closer to the final shape of the cymbal, including its bell and [[Taper (cymbal)|taper]]. It is an expensive process used for a few top quality [[bell metal|bell bronze]] cymbals.

====Sheet metal cymbals====

Many modern cymbals are stamped or, less commonly, hammered from [[sheet metal]].<ref>{{Cite book |last=Bucur |first=Voichita |url=https://books.google.com/books/about/Handbook_of_Materials_for_Percussion_Mus.html?id=ygJ6EAAAQBAJ |title=Handbook of materials for percussion musical instruments |date=2022 |publisher=Springer |isbn=978-3-030-98649-0 |location=Cham |pages=452 |chapter=Manufacturing a Cymbal}}</ref> It is a widely held misconception that only [[malleable]] alloys can be cold rolled into sheets. The historical and current production 602 line cymbals and the historical Sound Creation cymbals, both from the major manufacturer Paiste, and the current production M-Series cymbals from Meinl are made from sheet bell bronze with a 20% Tin content. Nevertheless, the term "sheet metal cymbals" tends to refer to cymbals produced from all other common [[cymbal alloys]] as opposed to bell bronze.

Some claim that these "sheet" cymbals have a different sound to traditionally made cymbals, owing to their manufacture from sheet metal rather than from individual castings. Others claim that the larger difference is the [[cymbal alloys|alloy]] or the hammering technique. Top quality "cast" cymbals are normally made from bell bronze, while "sheet" cymbals are normally made from [[malleable]] [[cymbal alloys|alloys]].

Paiste even claims that the division into cast and sheet cymbals is misleading, as all alloys are at some stage cast, and refuses to say whether or not particular cymbals are made from sheet metal. Their Sound [[cymbal alloys|Alloy]] patent implies that they have a method for making sheet metal cymbals of this [[cymbal alloys|alloy]], which would make these a unique third category.

The 2002 Paiste Cymbal Guide even claims that all cymbals are "cast", not just their own, but here they are not using the word in the established sense. All other manufacturers openly state that all of their malleable alloy cymbals are made from sheet metal, and that all of their bell bronze cymbals are 
individually cast. One possible reason for Paiste's claims is that there is still a great deal of prestige associated with traditionally cast cymbals. The first sheet cymbals were brass, and were very
cheaply made. It is only in the last few decades that top-quality sheet cymbals have been produced at all.

But whether this prestige is still deserved is doubtful. The major manufacturer Meinl produces both cast and sheet cymbals, and currently chooses to make their top premium line from sheet bronze. Some top drummers who play Zildjian or Sabian cymbals now choose to play their sheet bronze cymbals, rather than their more expensive cast cymbals, for the sake of their sound.

Louder drummers tend to choose sheet cymbals, while jazz players and major orchestras still tend towards cast cymbals. So it is more a matter of choosing the correct cymbal for the sound required.

===Forging techniques===

Some manufacturers of bell bronze cymbals now use hot-rolling and cold-pressing of individual cymbal blanks rather than traditional [[forging]]. These processes are faster and cheaper and appear to have little if any effect on the final sound.

===Hammering techniques===
Many manufacturers claim that their cymbals are "hand hammered", but again these words may not always mean the same thing.*
[[File:Cymbal Hammering.JPG|thumb|An unfinished cymbal being hand-hammered]]
Some hand hammered cymbals are hammered using a hammer held in the cymbal maker's hand. Others are hammered using a proprietary machine, but are still described as "hand hammered" because the hammering is under the control of an individual craftsman.

In general, truly hand hammered cymbals tend to have darker, lower, richer tones, and there tends to be far more variation in character between cymbals of supposedly identical models. Istanbul Mehmet Cymbals are an example of traditionally hand hammered cymbals.

Cymbals hammered by automated machines tend to be brighter, higher in pitch, and more cutting. Most significantly, the variation between supposedly identical cymbals is noticeably reduced, assuming adequate quality control.

The difference in sound is due mostly to the nature of the hammering: hand hammering is done randomly (that is not in a regular pattern) and thus the cymbal has a darker sound-even if this "random" style is dictated and executed by a computer. Symmetrical hammering- which is almost always done by a machine- gives the cymbal a brighter sound. This fact is reinforced by the example of some cymbals from English independent cymbal maker, Matt Nolan, which are unusual in being truly hand hammered but made from Malleable Bronze. The results are darker sounds from what are normally considered brighter alloys.

'''Paiste''' has used the same production processes from at least the mid 50's or earlier (they got their first hammering machine in 1952) to the present on all their top of the line Swiss and German produced cymbals.<br> 
An electro pneumatic hammer is operated manually by the cymbal-smith, he wears a mount with a spindle on his left knee that holds the cymbal, he uses his thigh to move the cymbal in and out from the hammer to position the blows, with his right foot he controls the power/depth of the hammer blows, with his hands he rotates the cymbal to evenly distribute the hammer marks.<br>  
Paiste has been using this technique and the same type of machines since at least the mid 50’s or earlier.<br> 
The next step is fine tuning: a different cymbal-smith now hammers the cymbal by hand to fine tune the shape and checks the bow with a ruler and on a steel flat table to make sure the edges are straight, he also checks the cymbal against a “master” for hammer pattern and shape of the bow.
*Paiste is the only company out of the “big four” (Paiste, Zildjian, Sabian and Meinl) that uses manual hammering to shape the curve or “bow” of the cymbal (Meinl used a computer controlled hammering machine to shape one line of their cymbals): Zildjian and Sabian use a 75 ton press to and '''STAMP''' their cymbals into shape. With the exception of their Turkish made cymbals, all of Meinl's cymbal production is completely computer automated.