Open main menu
Home
Random
Recent changes
Special pages
Community portal
Preferences
About Wikipedia
Disclaimers
Incubator escapee wiki
Search
User menu
Talk
Dark mode
Contributions
Create account
Log in
Editing
Field ion microscope
(section)
Warning:
You are not logged in. Your IP address will be publicly visible if you make any edits. If you
log in
or
create an account
, your edits will be attributed to your username, along with other benefits.
Anti-spam check. Do
not
fill this in!
==Design, limitations and applications== FIM like [[Field emission microscopy|field-emission microscopy]] (FEM) consists of a sharp sample tip and a fluorescent screen (now replaced by a [[Microchannel plate detector|multichannel plate]]) as the key elements. However, there are some essential differences as follows: #The tip potential is positive. #The chamber is filled with an imaging gas (typically, He or Ne at 10<sup>β5</sup> to 10<sup>β3</sup> Torr). #The tip is cooled to low temperatures (~20-80K). Like FEM, the field strength at the tip apex is typically a few V/[[Angstrom|Γ ]]. The experimental set-up and image formation in FIM is illustrated in the accompanying figures. [[Image:FIM experimental set up.jpg|thumb|right|FIM experimental set-up.]] [[Image:FIMtip.JPG|thumb|right|FIM image formation process.]] In FIM the presence of a strong field is critical. The imaging gas atoms (He, Ne) near the tip are polarized by the field and since the field is non-uniform the polarized atoms are attracted towards the tip surface. The imaging atoms then lose their [[kinetic energy]] performing a series of hops and accommodate to the tip temperature. Eventually, the imaging atoms are ionized by tunneling electrons into the surface and the resulting positive ions are accelerated along the [[field line]]s to the screen to form a highly magnified image of the sample tip. In FIM, the [[ionization]] takes place close to the tip, where the field is strongest. The electron that tunnels from the atom is picked up by the tip. There is a critical distance, xc, at which the tunneling probability is a maximum. This distance is typically about 0.4 nm. The very high spatial resolution and high contrast for features on the atomic scale arises from the fact that the electric field is enhanced in the vicinity of the surface atoms because of the higher local curvature. The resolution of FIM is limited by the thermal velocity of the imaging ion. Resolution of the order of 1Γ (atomic resolution) can be achieved by effective cooling of the tip. Application of FIM, like FEM, is limited by the materials which can be fabricated in the shape of a sharp tip, can be used in an ultra high vacuum (UHV) environment, and can tolerate the high [[electrostatic fields]]. For these reasons, [[refractory metals]] with high melting temperature (e.g. W, Mo, Pt, Ir) are conventional objects for FIM experiments. Metal tips for FEM and FIM are prepared by [[electropolishing]] (electrochemical polishing) of thin wires. However, these tips usually contain many [[Asperity (materials science)|asperities]]. The final preparation procedure involves the in situ removal of these asperities by field evaporation just by raising the tip voltage. Field evaporation is a field induced process which involves the removal of atoms from the surface itself at very high field strengths and typically occurs in the range 2-5 V/Γ . The effect of the field in this case is to reduce the effective binding energy of the atom to the surface and to give, in effect, a greatly increased evaporation rate relative to that expected at that temperature at zero fields. This process is self-regulating since the atoms that are at positions of high local curvature, such as adatoms or ledge atoms, are removed preferentially. The tips used in FIM is sharper (tip radius is 100~300 Γ ) compared to those used in FEM experiments (tip radius ~1000 Γ ). FIM has been used to study dynamical behavior of surfaces and the behavior of [[adatoms]] on surfaces. The problems studied include [[adsorption]]-[[desorption]] phenomena, [[surface diffusion]] of adatoms and clusters, adatom-adatom interactions, step motion, equilibrium crystal shape, etc. However, there is the possibility of the results being affected by the limited surface area (i.e. edge effects) and by the presence of large electric field.
Edit summary
(Briefly describe your changes)
By publishing changes, you agree to the
Terms of Use
, and you irrevocably agree to release your contribution under the
CC BY-SA 4.0 License
and the
GFDL
. You agree that a hyperlink or URL is sufficient attribution under the Creative Commons license.
Cancel
Editing help
(opens in new window)