Open main menu
Home
Random
Recent changes
Special pages
Community portal
Preferences
About Wikipedia
Disclaimers
Incubator escapee wiki
Search
User menu
Talk
Dark mode
Contributions
Create account
Log in
Editing
HPE Integrity Servers
(section)
Warning:
You are not logged in. Your IP address will be publicly visible if you make any edits. If you
log in
or
create an account
, your edits will be attributed to your username, along with other benefits.
Anti-spam check. Do
not
fill this in!
==Entry-level servers== ===rx1600 series=== The 1U rx1600 server is based on the zx1 chipset and has support for one or two 1 GHz Deerfield Itanium 2 CPUs. The 1U rx1620 server is based on the zx1 chipset and has support for one or two 1.3/1.6 GHz Fanwood Itanium 2 CPUs. Common for the series is: * '''Memory''': Up to 8 [[DIMM]]s * '''Storage''': Dual-channel [[Ultra-320]] [[SCSI]] controller with support for two [[hot-swap]]pable Ultra 320 drives ** One external Ultra 320 SCSI port *'''Network''':10/100/1000BaseTX [[Local area network|LAN]] port **An additional 10/100BaseTX LAN port * General-purpose [[RS-232]] [[serial port]] * Possibility for [[Redundancy (engineering)|redundant]] [[Power supply|power supplies]] * Two [[Universal Serial Bus|USB]] ports * Two PCI-X slots Optional features are: * SCSI [[RAID]] controller * Management processor card (required for support of [[Windows Server 2003]]) * [[CD-ROM|CD]]/[[DVD-ROM]] (required for installation of Windows Server 2003 and [[OpenVMS]]) The series support five operating systems: * [[HP-UX]] 11i v2 or later * OpenVMS for [[Itanium]] * Windows Server 2003 for Itanium * Windows Server 2008 for Itanium * [[Linux]] with [[kernel (operating system)|kernel]] that supports Itanium ===rx2600 series=== [[File:HP-Integrity-RX2600 09.jpg|thumb|Integrity rx2600 rack-mountable server and zx6000 workstation (based on a desktop RX2600 server)]] The 2U rx2600 server is based on the zx1 chipset and has support for one or two 1.0/1.4 GHz Deerfield/Madison, 1.3 GHz Madison or 1.5 GHz Madison CPUs. The 2U rx2620 server is based on the zx1 chipset and has support for one or two 1.6 GHz Fanwood/Madison or 1.4/1.6 GHz Montecito CPUs. The 2U rx2660 server is based on the zx2 chipset and has support for one or two 1.6 GHz Montvale or 1.42/1.66 GHz Montvale CPUs. Common for the series is: * '''Memory''': Up to 12 DIMMs (8 DIMMs for the rx2660) * '''Storage''': Dual channel Ultra 320 SCSI controller with support for two internal hard drives ** Support for three hot-swappable Ultra 320 drives ** One external Ultra 320 SCSI port * '''Network''': 10/100/1000BaseTX LAN port * Two general-purpose RS-232 serial ports * Possibility for redundant power supplies * Two USB ports * Four PCI-X slots Optional features are: * SCSI RAID controller * Management processor card (required for support of Windows Server 2003) * CD/DVD-ROM (Required for installation of Windows Server 2003 and OpenVMS) The series support four operating systems: * HP-UX 11i v2 or later * OpenVMS for Itanium * Windows Server 2003 for Itanium * Linux with kernel that supports Itanium ===rx2800 series=== The 2U rx2800 i2 server used the Intel Itanium 9300 series chipset with 8, 4 or 2 processor cores available. Among features common for the series:<ref>[https://archive.today/20130103085457/http://h71028.www7.hp.com/integrity/us/en/entry-class/rx2800-i2-overview.html (HP Integrity Entry-class rx2800-i2 Overview)]</ref> * '''Memory''': Up to 24 DIMMs * '''Storage''': HP p410i 3 Gb SAS Controller ** Support for 8 hot-plug Serial Attached SCSI (SAS) small form factor (SFF) 2.5 inch drives * '''Network''': Quad port 10/100/1000 Base TX LAN * Six expansion slots The series supports three operating systems: HP-UX 11i v3, OpenVMS v 8.4 for Itanium, and Windows Server for Itanium. ===rx3600=== The 4U rx3600 is based on the zx2 chipset and has two CPU sockets which support Montecito or Montvale processors. It supports up to 96 GB of main memory, using 24 four-gigabyte DIMMs. Standard features include: * '''Memory''': Up to 24 [[ECC memory]] PC2 4200 [[DDR2 SDRAM|DDR2]] DIMMs (with two optional 12-slot memory carrier boards) *'''Storage''': Eight 2.5" [[Serial Attached SCSI]] (SAS) disk-drive slots ** 8-port SAS host bus adapter, supporting two RAID 1 volumes and a hot spare * '''Network''': Dual-port 10/100/1000Base TX LAN * Integrated [[HP Integrated Lights-Out]]2 (iLO) management processor * Choice of I/O backplane: PCI-X with 8 available PCI-X slots, or the [[PCI Express]] I/O backplane, containing 4 x8 PCI Express slots, and 4 PCI-X slots. The system also has 2 reserved PCI-X slots, one of which is used for a PCI-X dual-port 10/100/1000Base TX LAN card, and the other is reserved for an optional internal Smart Array RAID card. * N+1 hot-swappable fans * Hot-swappable power supply * Hot-swappable PCI-X I/O cards Optional features: * up to 8 SAS disk drives, with support for up to 72 GB 15K-[[revolutions per minute|RPM]] or 146 GB 10K-RPM disks. * Redundant hot-swappable power supply * 8-port HP Smart Array P400 or P600, or 16-port P800 SAS RAID controllers available for internal disks, supporting RAID 1/5/6 and hot spare disks. ===rx4600 series=== [[File:HP Integrity rx4640 Series.jpg|thumb|Rack with Integrity rx4640 servers]] The 7U rx4610 utilizes Itanium 1 CPUs with support for up to four single-core CPUs, 64GB RAM and 10 PCI 64-bit slots. The 4U rx4640 utilizes Itanium 2 CPUs with support for up to four dual-core CPUs, 128 GB RAM and 6 PCI-X slots. Both of these models come with integrated USB and video as default, which enables support for Microsoft Windows operating systems. The rx4640 is architecturally the same box as the rp4440, and can be changed from PA-RISC to Itanium 2 support with the flip of a switch. ===rx5670=== The discontinued 7U rx5670 server has four CPU sockets which support McKinley and Madison processors. It is zx1-based and can have up to 48 DIMM slots, supporting 256 MB to 2 GB DIMMs which must be loaded in matched sets of four (quads). It has 9 PCI-X slots and 1 PCI slot available. ===rx6600=== The 7U rx6600 is based on the zx2 chipset and has four CPU sockets that support Montecito and Montvale CPUs. It supports 384 GB memory using 48 eight-gigabyte DIMMs. Standard features include: * '''Memory''': Up to 48 ECC memory PC2 4200 DDR2 DIMMs (with the 48-slot memory board) * '''Storage''': Sixteen 2.5" SAS disk drive slots ** 8-port SAS host bus adapter, supporting two RAID 1 volumes and a hot spare * '''Network''': Dual-port 10/100/1000Base TX LAN * Integrated iLO2 management processor * Choice of I/O backplane: PCI-X with 8 available PCI-X slots, or the PCI Express I/O backplane, containing 4 x8 PCI Express slots, and 4 PCI-X slots. The system also has 2 reserved PCI-X slots, one of which is used for a PCI-X dual-port 10/100/1000Base TX LAN card, and the other is reserved for an optional internal Smart Array RAID card. * N+1 hot-swappable fans * Hot-swappable power supply * Hot swappable PCI-X I/O cards Optional features: * Up to 16 SAS disk drives, with support for 72 GB 15K-RPM / 146 GB 10K-RPM or 300 GB 10K-RPM disks * Redundant hot swappable power supply * 8-port HP Smart Array P400 or P600, or 16-port P800 SAS RAID controllers available for internal disks, supporting RAID 1/5/6 and hot-spare disks
Edit summary
(Briefly describe your changes)
By publishing changes, you agree to the
Terms of Use
, and you irrevocably agree to release your contribution under the
CC BY-SA 4.0 License
and the
GFDL
. You agree that a hyperlink or URL is sufficient attribution under the Creative Commons license.
Cancel
Editing help
(opens in new window)