Editing Liquid-propellant rocket (section)

== Advantages and disadvantages ==
The use of liquid propellants has a number of advantages:
* A liquid rocket engine can be tested prior to use, whereas for a solid rocket motor a rigorous [[quality management]] must be applied during manufacturing to ensure high reliability.<ref name=":02">[http://cobweb.ecn.purdue.edu/~propulsi/propulsion/rockets/liquids.html NASA:Liquid rocket engines], 1998, Purdue University</ref>
* Liquid systems enable higher [[specific impulse]] than solids and hybrid rocket motors and can provide very high tankage efficiency.
* A liquid rocket engine can also usually be reused for several flights, as in the [[Space Shuttle]] and [[Falcon 9]] series rockets, although reuse of solid rocket motors was also effectively demonstrated during the Shuttle program.
* The flow of propellant into the combustion chamber can be throttled, which allows for control over the magnitude of the thrust throughout the flight. This enables real-time error correction during the flight along with efficiency gains.<ref name=":1">{{Cite book |last1=Heister |first1=Stephen D. |url=http://dx.doi.org/10.1017/9781108381376 |title=Rocket Propulsion |last2=Anderson |first2=William E. |last3=Pourpoint |first3=Timothée L. |last4=Cassady |first4=R. Joseph |date=2019-02-07 |publisher=Cambridge University Press |doi=10.1017/9781108381376 |isbn=978-1-108-38137-6|s2cid=203039055 }}</ref>
* Shutdown and restart capabilities allow for multiple burn cycles throughout a flight.<ref name=":22">{{Citation |chapter=History and principles of rocket propulsion |chapter-url=http://dx.doi.org/10.1007/3-540-27041-8_1 |series=Springer Praxis Books |date=2005 |pages=1–34 |access-date=2023-11-29 |publisher=Springer Berlin Heidelberg |doi=10.1007/3-540-27041-8_1 |isbn=978-3-540-22190-6 |title=Rocket and Spacecraft Propulsion }}</ref>
* In the case of an emergency, liquid propelled rockets can be shutdown in a controlled manner, which provides an extra level of safety and mission abort capability.<ref name=":22" />

[[File:Space Shuttle Main Engine Maintenance - GPN-2000-000548.jpg|right|thumb|Bipropellant liquid rockets are simple in concept but due to high temperatures and high speed moving parts, very complex in practice.]]
Use of liquid propellants can also be associated with a number of issues:

* Because the propellant is a very large proportion of the mass of the vehicle, the [[Center of gravity of an aircraft|center of mass]] shifts significantly rearward as the propellant is used; one will typically lose control of the vehicle if its center mass gets too close to the center of drag/pressure.
* When operated within an atmosphere, pressurization of the typically very thin-walled propellant tanks must guarantee positive [[gauge pressure]] at all times to avoid catastrophic collapse of the tank.
* Liquid propellants are subject to ''[[slosh]]'', which has frequently led to loss of control of the vehicle. This can be controlled with slosh baffles in the tanks as well as judicious control laws in the [[guidance system]].
* They can suffer from [[pogo oscillation]] where the rocket suffers from uncommanded cycles of acceleration.
* Liquid propellants often need [[ullage motor]]s in zero-gravity or during staging to avoid sucking gas into engines at start up. They are also subject to vortexing within the tank, particularly towards the end of the burn, which can also result in gas being sucked into the engine or pump.
* Liquid propellants can leak, especially [[hydrogen]], possibly leading to the formation of an explosive mixture.
* [[Turbopumps]] to pump liquid propellants are complex to design, and can suffer serious failure modes, such as overspeeding if they run dry or shedding fragments at high speed if metal particles from the manufacturing process enter the pump.
* [[Cryogenic propellant]]s, such as liquid oxygen, freeze atmospheric water vapor into ice. This can damage or block seals and valves and can cause leaks and other failures. Avoiding this problem often requires lengthy ''chilldown'' procedures which attempt to remove as much of the vapor from the system as possible. Ice can also form on the outside of the tank, and later fall and damage the vehicle. External foam insulation can cause issues as shown by the [[Space Shuttle Columbia disaster]]. Non-cryogenic propellants do not cause such problems.
* Non-storable liquid rockets require considerable preparation immediately before launch. This makes them less practical than [[solid rocket]]s for most weapon systems.