Editing Slippery eight loop (section)

==Instructions==
The instructions on how to create a slippery eight loop is as follows:
#Begin by creating a figure eight knot with one end long enough to be looped through it again
#Make sure that the figure eight loop is not tight, but rather quite loose with obvious gaps
#Bring the long, working end to the top of the knot
#Pass the working end behind the standing line in the knot and feed the end through the Eight
#After the working end has been threaded through the knot, pull the knot tight
#Adjust the size of the loop by alternately pulling the different ends or one side of the loop