Editing Anodizing (section)

==Sealing==
Sealing is the final step in the anodizing process. Acidic anodizing solutions produce pores in the anodized coating. These pores can absorb dyes and retain lubricants but are also an avenue for corrosion. When lubrication properties are not critical, they are usually sealed after dyeing to increase corrosion resistance and dye retention. There are three most common types of sealing.

# Long immersion in boiling-hot—{{convert|96|-|100|C}}—deionized water or steam is the simplest sealing process, although it is not completely effective and reduces abrasion resistance by 20%.<ref name="Edwards" /> The oxide is converted into its [[hydrated]] form and the resulting swelling reduces the porosity of the surface. 
# Mid-temperature sealing process which works at {{convert|160-180|F|sigfig=1}} in solutions containing organic additives and metal salts. However, this process will likely leach the colors. 
# Cold sealing process, where the pores are closed by impregnation of a sealant in a room-temperature bath, is more popular due to energy savings. Coatings sealed in this method are not suitable for adhesive bonding. [[Teflon]], [[nickel acetate]], cobalt acetate, and hot sodium or potassium [[dichromate]] seals are commonly used. MIL-A-8625 requires sealing for thin coatings (Types I and II) and allows it as an option for thick ones (Type III).