Editing Flow measurement (section)

==Variable-area flowmeters==

[[File:Techfluid-CG34-2500.jpg|thumb|Techfluid-CG34-2500 rotameter]]

A "variable area meter" measures fluid flow by allowing the cross sectional area of the device to vary in response to the flow, causing some measurable effect that indicates the rate.
A [[rotameter]] is an example of a variable area meter, where a weighted "float" rises in a tapered tube as the flow rate increases; the float stops rising when area between float and tube is large enough that the weight of the float is balanced by the drag of fluid flow. A kind of rotameter used for medical gases is the [[Thorpe tube flowmeter]]. Floats are made in many different shapes, with spheres and spherical ellipses being the most common. Some are designed to spin visibly in the fluid stream to aid the user in determining whether the float is stuck or not. Rotameters are available for a wide range of liquids but are most commonly used with water or air. They can be made to reliably measure flow down to 1% accuracy.

Another type is a variable area orifice, where a spring-loaded tapered plunger is deflected by flow through an orifice. The displacement can be related to the flow rate.<ref>Stefaan J.R.Simons, ''Concepts of Chemical Engineering 4 Chemists'' Royal Society of Chemistry,(2007) {{ISBN|978-0-85404-951-6}}, page 75</ref>