Editing Audiometry (section)

===Pure tone audiometry and audiograms===
Following development of the induction coil in 1849 and audio transducers (telephone) in 1876, a variety of audiometers were invented in United States and overseas. These early audiometers were known as induction-coil audiometers due to...
*Hughes 1879
*Hartmann 1878
In 1885, Arthur Hartmann designed an "Auditory Chart" which included left and right ear tuning fork representation on the x -axis and percent of hearing on the y-axis.

In 1899, Carl E. Seashore Prof. of Psychology at U. Iowa, United States, introduced the audiometer as an instrument to measure the "keenness of hearing" whether in the laboratory, schoolroom, or office of the psychologist or aurist. The instrument operated on a battery and presented a tone or a click; it had an attenuator set in a scale of 40 steps. His machine became the basis of the audiometers later manufactured at Western Electric.

*Cordia C. Bunch 1919

The concept of a frequency versus sensitivity (amplitude) audiogram plot of human hearing sensitivity was conceived by German physicist [[Max Wien]] in 1903. The first vacuum tube implementations, November 1919, two groups of researchers — K.L. Schaefer and G. Gruschke, B. Griessmann and H. Schwarzkopf — demonstrated before the Berlin Oto-logical Society two instruments designed to test hearing acuity. Both were built with vacuum tubes. Their designs were characteristic of the two basic types of electronic circuits used in most electronic audio devices for the next two decades. Neither of the two devices was developed commercially for some time, although the second was to be manufactured under the name "Otaudion."
The Western Electric 1A, developed by <who> was built in 1922 in the United States. It was not until 1922 that otolaryngologist Dr. [[Edmund P. Fowler]], and physicists Dr. [[Harvey Fletcher]] and [[Robert Wegel]] of Western Electric Co. first employed frequency at octave intervals plotted along the x axis and intensity downward along the y-axis as a degree of hearing loss. Fletcher et al. also coined the term "audiogram" at that time.

With further technologic advances, bone conduction testing capabilities became a standard component of all Western Electric audiometers by 1928.