Open main menu
Home
Random
Recent changes
Special pages
Community portal
Preferences
About Wikipedia
Disclaimers
Incubator escapee wiki
Search
User menu
Talk
Dark mode
Contributions
Create account
Log in
Editing
Axle
(section)
Warning:
You are not logged in. Your IP address will be publicly visible if you make any edits. If you
log in
or
create an account
, your edits will be attributed to your username, along with other benefits.
Anti-spam check. Do
not
fill this in!
==Structural features and design== [[File:0 Series Shinkansen Wheel-06.jpg|thumb|upright=1.1|A [[0 Series Shinkansen]] wheel used on Japanese high-speed [[Shinkansen|bullet trains]]]] A straight axle is a single rigid shaft connecting a wheel on the left side of the vehicle to a wheel on the right side. The axis of rotation fixed by the axle is common to both wheels. Such a design can keep the wheel positions steady under heavy stress, and can therefore support heavy loads. Straight axles are used on trains (that is, locomotives and railway wagons), for the rear axles of commercial trucks, and on heavy-duty off-road vehicles. The axle can optionally be protected and further reinforced by enclosing the length of the axle in a housing. In split-axle designs, the wheel on each side is attached to a separate shaft. Modern passenger cars have split-drive axles. In some designs, this allows independent suspension of the left and right wheels, and therefore a smoother ride. Even when the suspension is not independent, split axles permit the use of a differential, allowing the left and right drive wheels to be driven at different speeds as the automobile turns, improving traction and extending tire life. A tandem axle is a group of two or more axles situated close together. Truck designs use such a configuration to provide a greater weight capacity than a single axle. Semi-trailers usually have a tandem axle at the rear. Axles are typically made from SAE grade [[41xx steel]] or SAE grade 10xx steel. SAE grade 41xx steel is commonly known as "[[chrome-molybdenum steel]]" (or "chrome-moly") while SAE grade 10xx steel is known as "[[carbon steel]]". The primary differences between the two are that chrome-moly steel is significantly more resistant to bending or breaking, and is very difficult to weld with tools normally found outside a professional welding shop.<ref name="Ring & Pinion">{{cite web|title=Ring & Pinion |url= http://www.ringpinion.com/b2c/PartCats.aspx?SearchMode=SubCat&ParentID=2 |access-date=9 October 2013 |archive-url= https://web.archive.org/web/20131104110205/http://www.ringpinion.com/b2c/PartCats.aspx?SearchMode=SubCat&ParentID=2 |archive-date=4 November 2013 |url-status=dead}}</ref>
Edit summary
(Briefly describe your changes)
By publishing changes, you agree to the
Terms of Use
, and you irrevocably agree to release your contribution under the
CC BY-SA 4.0 License
and the
GFDL
. You agree that a hyperlink or URL is sufficient attribution under the Creative Commons license.
Cancel
Editing help
(opens in new window)