Editing Electromagnetic propulsion (section)

=== Trains ===
[[File:JR-Maglev-MLX01-2.jpg|thumb|[[SCMaglev]] on the [[Yamanashi Prefecture|Yamanashi]] test track in Japan in November 2005]]

Electromagnetic propulsion is utilized in transportation systems to minimize friction and maximize speed over long distances. This has mainly been implemented in high-speed rail systems that use a linear induction motor to power trains by magnetic currents. It has also been utilized in theme parks to create high-speed [[roller coaster]]s and water rides.

'''Maglev'''
{{Main article|Maglev (transport)}}

	In a [[maglev (transport)|maglev train]] the primary coil assembly lies below the reaction plate.<ref name =katenine /> There is a 1–10&nbsp;cm (0.39-3.93&nbsp;inch) air gap between that eliminates friction, allowing for speeds up to 500&nbsp;km/h (310&nbsp;mph).<ref name =katenine /> An alternating electric current is supplied to the coils, which creates a change in polarity of the magnetic field.<ref name =kateseven /> This pulls the train forward from the front, and thrusts the train forward from the back.<ref name =kateten>{{Cite news |url=http://news.bbc.co.uk/2/hi/asia-pacific/2616339.stm |title=Shanghai supertrain makes first journey |date=December 31, 2002 |work=BBC News}}</ref>

A typical Maglev train costs three cents per passenger mile, or seven cents per ton mile (not including construction costs).<ref name =kateeight /> This compares to 15 cents per passenger miles for travel by plane and 30 cents for ton mile for travel by intercity trucks.<ref name =kateeight /> Maglev tracks have high longevity due to minimal friction and an even distribution of weight.<ref name =kateseven /> Most last for at least 50 years and require little maintenance during this time.<ref name =katesix /> Maglev trains are promoted for their [[Efficient energy use|energy efficiency]] since they run on electricity, which can be produced by coal, nuclear, hydro, fusion, wind or solar power without requiring oil.<ref name =katefour /> On average most trains travel 483&nbsp;km/h (300&nbsp;mph) and use 0.4 megajoules per passenger mile.<ref name =kateeight /> Using a 20&nbsp;mi/gallon car with 1.8 people as a comparison, travel by car is typically 97&nbsp;km/h (60&nbsp;mph) and uses 4 megajoules per passenger mile.<ref name =kateeight /> The carbon dioxide emissions are based upon the method of electrical production and [[Fossil-fuel power station|fuel use]]. Many renewable electrical production methods generate little or no carbon dioxide during production (although carbon dioxide may be released during manufacture of the components, e.g. the steel used in wind turbines). The running of the train is significantly quieter than other trains, trucks or airplanes.<ref name =katefive />
<!--
  Is there an existing Wikipedia article that addresses the carbon dioxide costs of cement production, iron refining and steel making?  See http://www.osti.gov/scitech/servlets/purl/783473/
-->

'''Assembly: Linear Induction Motor'''
{{Main article|Linear motor}}

A [[linear motor|linear induction motor]] consists of two parts: the primary coil assembly and the reaction plate.<ref name =kateseven>[http://www.gluckman.com/Maglev.html Gluckman, R. (n.d.). Is it a Bird? a plane?. Retrieved from gluckman.com]</ref><ref name=katesix>Lmac - ac linear induction motor. (2010). Retrieved from {{cite web |url=http://www.baldormotion.com/products/linearproducts/lmac.asp |title=LMAC - AC Linear Induction Motor: Baldor, a leader in motion control, servo, linear motors, energy efficient electric motors and adjustable speed drives |access-date=2010-03-10 |url-status=dead |archive-url=https://web.archive.org/web/20100105054216/http://www.baldormotion.com/products/linearproducts/lmac.asp |archive-date=2010-01-05 }}</ref> The primary coil assembly consists of phase windings surrounded by steel laminations, and includes a thermal sensor within a thermal epoxy.<ref name="kateeight">{{cite journal|title=The Bachelet Levitated Railway |journal=Nature|volume=93|issue=2324|year=1914|pages=273|issn=0028-0836|doi=10.1038/093273a0|bibcode=1914Natur..93Q.273.|s2cid=11904735|doi-access=free}}</ref> The reaction plate consists of a 3.2&nbsp;mm (0.125&nbsp;inch) thick aluminum or copper plate bonded to a 6.4&nbsp;mm (0.25&nbsp;inch) thick cold rolled steel sheet.<ref name =katesix /> There is an air gap between these two parts that creates the frictionless property an electromagnetic propulsion system encompasses.<ref name =katenine>{{Cite web |url=http://science.howstuffworks.com/maglev-train1.htm |last=Bonsor |first=K |date=October 13, 2010 |title=How Maglev trains work}}</ref><ref name =katesix /> Functioning of a linear induction motor begins with an AC force that is supplied to the coil windings within the primary coil assembly.<ref name =katefour /> This creates a traveling magnetic field that induces a current in the reaction plate, which then creates its own magnetic field.<ref name =kateten /> The magnetic fields in the primary coil assembly and reaction plate alternate, which generates force and direct linear motion.<ref name =katesix />