Editing Michelson interferometer (section)

==Applications==
[[File:Fourier transform spectrometer.png|thumb|300px|right|Figure 5. Fourier transform spectroscopy.]]
The Michelson interferometer configuration is used in a number of  different applications.

===Fourier transform spectrometer===
{{main|Fourier transform spectroscopy}}

Fig.&nbsp;5 illustrates the operation of a Fourier transform spectrometer, which is essentially a Michelson interferometer with one movable mirror. (A practical Fourier transform spectrometer would substitute [[Corner reflector|corner cube reflectors]] for the flat mirrors of the conventional Michelson interferometer, but for simplicity, the illustration does not show this.) An interferogram is generated by making measurements of the signal at many discrete positions of the moving mirror. A [[Fourier transform]] converts the interferogram into an actual spectrum.<ref name=OPIFourier>{{cite web|title=Spectrometry by Fourier transform|url=http://www.optique-ingenieur.org/en/courses/OPI_ang_M02_C05/co/Contenu_32.html|publisher=OPI - Optique pour l'Ingénieur|access-date=3 April 2012}}</ref> Fourier transform spectrometers can offer significant advantages over dispersive (i.e., grating and prism) spectrometers under certain conditions. (1) The Michelson interferometer's detector in effect monitors all wavelengths simultaneously throughout the entire measurement. When using a noisy detector, such as at infrared wavelengths, this offers an increase in [[signal-to-noise ratio]] while using only a single detector element; (2) the interferometer does not require a limited aperture as do grating or prism spectrometers, which require the incoming light to pass through a narrow slit in order to achieve high spectral resolution. This is an advantage when the incoming light is not of a single spatial mode.<ref name=Block>{{cite web|title=Michelson Interferometer Operation|url=http://blockeng.com/technology/ftirtechnology.html|publisher=Block Engineering|access-date=26 April 2012}}</ref> For more information, see [[Fellgett's advantage]].

===Twyman–Green interferometer===
[[File:Twyman-Green interferometer.png|thumb|300px|right|Figure 6. Twyman–Green interferometer.]]
The [[Twyman–Green interferometer]] is a variation of the Michelson interferometer used to test small optical components, invented and patented by Twyman and Green in 1916. The basic characteristics distinguishing it from the Michelson configuration are the use of a monochromatic point light source and a collimator. Michelson (1918) criticized the Twyman–Green configuration as being unsuitable for the testing of large optical components, since the available light sources had limited [[coherence length]]. Michelson pointed out that constraints on geometry forced by the limited coherence length required the use of a reference mirror of equal size to the test mirror, making the Twyman–Green impractical for many purposes.<ref name=Michelson1918>{{Cite journal
| doi = 10.1073/pnas.4.7.210
| last1 = Michelson | first1 = A. A.
| title = On the Correction of Optical Surfaces
| journal = Proceedings of the National Academy of Sciences of the United States of America
| volume = 4
| issue = 7
| pages = 210–212
| year = 1918
| pmid = 16576300
| pmc = 1091444
|bibcode = 1918PNAS....4..210M | doi-access = free }}</ref> Decades later, the advent of laser light sources answered Michelson's objections.

The use of a figured reference mirror in one arm allows the Twyman–Green interferometer to be used for testing various forms of optical component, such as lenses or telescope mirrors.<ref name=Malacara2006_2>{{Cite book | last1 = Malacara | first1 = D. | chapter = Twyman–Green Interferometer | doi = 10.1002/9780470135976.ch2 | title = Optical Shop Testing | pages = 46–96 | year = 2007 | isbn = 9780470135976 }}</ref> Fig.&nbsp;6 illustrates a Twyman–Green interferometer set up to test a lens. A point source of monochromatic light is expanded by a diverging lens (not shown), then is collimated into a parallel beam. A convex spherical mirror is positioned so that its center of curvature coincides with the focus of the lens being tested. The emergent beam is recorded by an imaging system for analysis.<ref name=OPITwyman>{{cite web|title=Interferential Devices – Twyman–Green Interferometer|url=http://www.optique-ingenieur.org/en/courses/OPI_ang_M02_C05/co/Contenu_31.html|publisher=OPI – Optique pour l'Ingénieur|access-date=4 April 2012}}</ref>

===Laser unequal path interferometer===
The "LUPI" is a Twyman–Green interferometer that uses a coherent laser light source. The high [[coherence length]] of a laser allows unequal path lengths in the test and reference arms and permits economical use of the Twyman–Green configuration in testing large optical components. A similar scheme has been used by Tajammal M in his PhD thesis (Manchester University UK, 1995) to balance two arms of an LDA system. This system used fibre optic direction coupler.

===Gravitational wave detection===
{{Main|Ground-based interferometric gravitational-wave search}}
Michelson interferometry is the leading method for the direct [[Gravitational-wave detector#Interferometers|detection of gravitational waves]]. This involves detecting tiny [[Strain (materials science)|strains]] in space itself, affecting two long arms of the interferometer unequally, due to a strong passing gravitational wave. In 2015 the first detection of [[gravitational waves]] was accomplished using the two Michelson interferometers, each with 4&nbsp;km arms, which comprise the [[LIGO|Laser Interferometer Gravitational-Wave Observatory]].<ref>{{cite web|url=https://www.ligo.caltech.edu/page/what-is-interferometer|title=What is an Interferometer?|website=LIGO Lab – Caltech|access-date=23 April 2018}}</ref> This was the first experimental validation of gravitational waves, predicted by [[Albert Einstein]]'s [[General Theory of Relativity]]. With the addition of the [[Virgo interferometer]] in Europe, it became possible to calculate the direction from which the gravitational waves originate, using the tiny arrival-time differences between the three detectors.<ref>{{cite web|url=https://www.ligo.caltech.edu/news/ligo20160211|title=Gravitational Waves Detected 100 Years After Einstein's Prediction|website=caltech.edu|access-date=23 April 2018}}</ref><ref name=nat>''Nature'', "Dawn of a new astronomy", M. Coleman Miller, Vol 531, issue 7592, page 40, 3 March 2016</ref><ref>''The New York Times'', "With Faint Chirp, Scientists Prove Einstein Correct", Dennis Overbye, February 12, 2016, page A1, New York</ref>  In 2020, [[India]] was constructing a fourth Michelson interferometer for gravitational wave detection.

===Miscellaneous applications===
[[File:SDOHMIdoppler sunspot.png|thumb|350px|Figure 7. Helioseismic Magnetic Imager (HMI) dopplergram showing the velocity of gas flows on the solar surface. Red indicates motion away from the observer, and blue indicates motion towards the observer.]]
Fig.&nbsp;7 illustrates use of a Michelson interferometer as a tunable narrow band filter to create [[dopplergram]]s of the Sun's surface. When used as a tunable narrow band filter, Michelson interferometers exhibit a number of advantages and disadvantages when compared with competing technologies such as [[Fabry–Pérot interferometer]]s or [[Lyot filter]]s. Michelson interferometers have the largest field of view for a specified wavelength, and are relatively simple in operation, since tuning is via mechanical rotation of waveplates rather than via high voltage control of piezoelectric crystals or lithium niobate optical modulators as used in a Fabry–Pérot system. Compared with Lyot filters, which use birefringent elements, Michelson interferometers have a relatively low temperature sensitivity. On the negative side, Michelson interferometers have a relatively restricted wavelength range, and require use of prefilters which restrict transmittance. The reliability of Michelson interferometers has tended to favor their use in space applications, while the broad wavelength range and overall simplicity of Fabry–Pérot interferometers has favored their use in ground-based systems.<ref name=Gary2004>{{cite web|last1=Gary |first1=G.A. |last2=Balasubramaniam |first2=K.S.|title=Additional Notes Concerning the Selection of a Multiple-Etalon System for ATST|url=http://atst.nso.edu/files/docs/TN-0027.pdf |date=11 June 2004 |publisher=Advanced Technology Solar Telescope|access-date=29 April 2012|url-status=dead|archive-url=https://web.archive.org/web/20100810222938/http://atst.nso.edu/files/docs/TN-0027.pdf|archive-date=10 August 2010}}</ref>

[[File:OCT B-Scan Setup-en.svg|thumb|350px|right|Figure 8. Typical optical setup of single point OCT]]
Another application of the Michelson interferometer is in [[optical coherence tomography]] (OCT), a medical imaging technique using low-coherence interferometry to provide tomographic visualization of internal tissue microstructures. As seen in Fig.&nbsp;8, the core of a typical OCT system is a Michelson interferometer. One interferometer arm is focused onto the tissue sample and scans the sample in an X-Y longitudinal raster pattern. The other interferometer arm is bounced off a reference mirror. Reflected light from the tissue sample is combined with reflected light from the reference. Because of the low coherence of the light source, interferometric signal is observed only over a limited depth of sample. X-Y scanning therefore records one thin optical slice of the sample at a time. By performing multiple scans, moving the reference mirror between each scan, an entire three-dimensional image of the tissue can be reconstructed.<ref name=Huang1991>{{cite journal|last=Huang|first=D.|display-authors=4 |author2=Swanson, E.A. |author3=Lin, C.P. |author4=Schuman, J.S. |author5=Stinson, W.G. |author6=Chang, W. |author7=Hee, M.R. |author8=Flotte, T. |author9=Gregory, K. |author10=Puliafito, C.A. |author11=Fujimoto, J.G.|title=Optical Coherence Tomography|journal=Science|date=1991|volume=254|issue=5035|doi=10.1126/science.1957169|url=http://stuff.mit.edu:8001/afs/athena/course/2/2.717/OldFiles/www/oct_fujimoto_91.pdf|access-date=10 April 2012|pmid=1957169|bibcode=1991Sci...254.1178H|pages=1178–81 |pmc=4638169}}</ref><ref name=Fercher1996>{{cite journal|last=Fercher|first=A.F.|title=Optical Coherence Tomography|journal=Journal of Biomedical Optics|date=1996|volume=1|issue=2|pages=157–173|url=http://otg.downstate.edu/downloads/2008/spring08/refsbmi/oct/fercher.pdf|access-date=10 April 2012|bibcode=1996JBO.....1..157F|doi=10.1117/12.231361|pmid=23014682|archive-url=https://web.archive.org/web/20180925131609/http://otg.downstate.edu/downloads/2008/spring08/refsbmi/oct/fercher.pdf|archive-date=25 September 2018|url-status=dead}}</ref> Recent advances have striven to combine the nanometer phase retrieval of coherent interferometry with the ranging capability of low-coherence interferometry.<ref name=Olszak>{{cite web|last=Olszak|first=A.G.; Schmit, J.; Heaton, M.G.|title=Interferometry: Technology and Applications|url=http://www.bruker-axs.com/fileadmin/user_upload/PDF_2011/application_notes/Interferometry_Technology_and_Applications_SOM_AN47.pdf|publisher=Bruker|access-date=1 April 2012}}{{Dead link|date=April 2020 |bot=InternetArchiveBot |fix-attempted=yes }}</ref>

Others applications include [[delay line interferometer]] which convert phase modulation into amplitude modulation in [[DWDM]] networks, the characterization of high-frequency circuits,<ref>Seok, Eunyoung, et al. "A 410GHz CMOS push-push oscillator with an on-chip patch antenna." 2008 IEEE International Solid-State Circuits Conference-Digest of Technical Papers. IEEE, 2008.| https://doi.org/10.1109/ISSCC.2008.4523262</ref><ref>{{cite journal | last1 = Arenas | first1 = D. J. | display-authors = etal | year = 2011 | title = Characterization of near-terahertz complementary metal-oxide semiconductor circuits using a Fourier-transform interferometer | journal = Review of Scientific Instruments | volume = 82 | issue = 10| pages = 103106–103106–6 | doi = 10.1063/1.3647223 | pmid = 22047279 | bibcode = 2011RScI...82j3106A | osti = 1076453 }}</ref> and low-cost THz power generation.<ref>Shim, Dongha, et al. "THz power generation beyond transistor fmax." RF and mm-Wave Power Generation in Silicon. Academic Press, 2016. 461-484. {{doi|10.1016/B978-0-12-408052-2.00017-7}}</ref>

===Atmospheric and space applications===
The Michelson Interferometer has played an important role in studies of the [[upper atmosphere]], revealing temperatures and winds, employing both space-borne, and ground-based instruments, by measuring the [[Doppler broadening|Doppler widths]] and shifts in the spectra of airglow and aurora. For example, the Wind Imaging Interferometer, WINDII,<ref>{{cite journal|last=Shepherd|first=G. G.|display-authors=etal|date=1993|title=WINDII, the Wind Imaging Interferometer on the Upper Atmosphere Research Satellite|journal=[[J. Geophys. Res.]]|volume=98(D6)|pages=10,725–10,750}}</ref> on the Upper
Atmosphere Research Satellite, UARS, (launched on September 12, 1991) measured the global wind and temperature patterns from 80 to 300&nbsp;km by using the visible airglow emission from these altitudes as a target and employing optical Doppler interferometry to measure the small wavelength shifts of the narrow atomic and molecular airglow emission lines induced by the
bulk velocity of the atmosphere carrying the emitting species. The instrument was an all-glass field-widened achromatically and thermally compensated phase-stepping Michelson interferometer, along with a bare CCD detector that imaged the airglow limb through the interferometer. A sequence of phase-stepped images was processed to derive the wind velocity for two orthogonal view directions, yielding the horizontal wind vector.

The principle of using a polarizing Michelson Interferometer as a narrow band filter was first described by Evans <ref>{{cite journal|last=Evans|first=J. W.|date=1947|title=The birefringent filter|journal=[[J. Opt. Soc. Am.]]|volume=39 229}}</ref> who developed a birefringent photometer where the incoming light is split into two orthogonally polarized components by a polarizing beam splitter, sandwiched between two halves of a Michelson cube. This led to the first polarizing wide-field Michelson interferometer described by Title and Ramsey <ref name="Title 1980">{{cite journal|last=Title|first=A. M.|author2=Ramsey, H. E.|date=1980|title=Improvements in birefringent filters. 6: Analog birefringent elements|journal=[[Appl. Opt.]]|volume=19, p. 2046|issue=12|pages=2046–2058 |doi=10.1364/AO.19.002046|pmid=20221180 |bibcode=1980ApOpt..19.2046T}}</ref> which was used for solar observations; and led to the development of a refined instrument applied to measurements of oscillations in the Sun's atmosphere, employing a network of observatories around the Earth known as the Global Oscillations Network Group (GONG).<ref>{{cite journal|last=Harvey|first=J.|display-authors=etal|date=1996|title=The Global Oscillation Network Group (GONG) Project|journal=[[Science (journal)|Science]]|volume=272|pages=1284–1286|bibcode=1996Sci...272.1284H|doi=10.1126/science.272.5266.1284|issue=5266|pmid=8662455|s2cid=41026039|url=https://zenodo.org/record/1231076}}</ref>

[[File:417176main SDO Guide CMR Page 09 Image 0003.jpg|thumb|right|Figure 9. Magnetogram (magnetic image) of the Sun showing magnetically intense areas (active regions) in black and white, as imaged by the Helioseismic and Magnetic Imager (HMI) on the Solar Dynamics Observatory]]
The Polarizing Atmospheric Michelson Interferometer, PAMI, developed by Bird et al.,<ref>{{cite journal|last=Bird|first=J.|display-authors=etal|date=1995|title=A polarizing Michelson interferometer for measuring thermospheric winds|journal=[[Meas. Sci. Technol.]]|volume=6 | issue = 9|pages=1368–1378|doi=10.1088/0957-0233/6/9/019|bibcode = 1995MeScT...6.1368B |s2cid=250737166 }}</ref> and discussed in ''Spectral Imaging of the Atmosphere'',<ref>{{cite book|last=Shepherd|first=G. G.|date=2002|title=Spectral Imaging of the Atmosphere|publisher=[[Academic Press]]|isbn=0-12-639481-4}}</ref> combines the polarization tuning technique of Title and Ramsey <ref name="Title 1980"/> with the Shepherd ''et al.'' <ref>{{cite journal|last=Shepherd|first=G. G.|display-authors=etal|date=1985|title=WAMDII: wide angle Michelson Doppler imaging interferometer for Spacelab|journal=[[Appl. Opt.]]|volume=24, p. 1571}}</ref> technique of deriving winds and temperatures from emission rate measurements at sequential path differences, but the scanning system used by PAMI is much simpler than the moving mirror systems in that it has no internal moving parts, instead scanning with a polarizer external to the interferometer. The PAMI was demonstrated in an observation campaign <ref>{{cite journal|last=Bird|first=J.|author2=G. G. Shepherd |author3=C. A. Tepley|date=1995|title=Comparison of lower thermospheric winds measured by a Polarizing Michelson Interferometer and a Fabry–Pérot spectrometer during the AIDA campaign|journal=[[Journal of Atmospheric and Terrestrial Physics]]|volume=55 | issue = 3|pages=313–324|doi=10.1016/0021-9169(93)90071-6|bibcode = 1993JATP...55..313B }}</ref> where its performance was compared to a Fabry–Pérot spectrometer, and employed to measure E-region winds.

More recently, the [[Helioseismology|Helioseismic]] and Magnetic Imager ([[Solar Dynamics Observatory#Helioseismic and Magnetic Imager (HMI)|HMI]]), on the [[Solar Dynamics Observatory]], employs two Michelson Interferometers with a polarizer and other tunable elements, to study solar variability and to characterize the Sun's interior along with the various components of magnetic activity. HMI takes high-resolution measurements of the longitudinal and vector magnetic field over the entire visible disk thus extending the capabilities of its predecessor, the [[Solar and Heliospheric Observatory|SOHO]]'s MDI instrument (See Fig.&nbsp;9).<ref>{{cite web|author=Dean Pesnell |author2=Kevin Addison|title=SDO – Solar Dynamics Observatory: SDO Instruments|url=http://sdo.gsfc.nasa.gov/mission/instruments.php|publisher=NASA|date=5 February 2010|access-date=2010-02-13}}</ref> HMI produces data to determine the interior sources and mechanisms of solar variability and how the physical processes inside the Sun are related to surface magnetic field and activity. It also produces data to enable estimates of the coronal magnetic field for studies of variability in the extended solar atmosphere. HMI observations will help establish the relationships between the internal dynamics and magnetic activity in order to understand solar variability and its effects.<ref>{{cite web|author=Solar Physics Research Group| url=http://hmi.stanford.edu/Description/HMI_Overview.html|title=Helioseismic and Magnetic Imager Investigation|publisher=Stanford University|access-date=2010-02-13}}</ref>

In one example of the use of the MDI, Stanford scientists reported the detection of several sunspot regions in the deep interior of the Sun, 1–2 days before they appeared on the solar disc.<ref>{{Cite journal | last1 = Ilonidis | first1 = S. | last2 = Zhao | first2 = J. | last3 = Kosovichev | first3 = A. | doi = 10.1126/science.1206253 | title = Detection of Emerging Sunspot Regions in the Solar Interior | journal = Science | volume = 333 | issue = 6045 | pages = 993–996 | year = 2011 | pmid =  21852494|bibcode = 2011Sci...333..993I | s2cid = 19790107 }}</ref> The detection of sunspots in the solar interior may thus provide valuable warnings about upcoming surface magnetic activity which could be used to improve and extend the predictions of space weather forecasts.