Editing Solid mechanics (section)

==Response models==
A material has a rest shape and its shape departs away from the rest shape due to stress. The amount of departure from rest shape is called [[Deformation (mechanics)|deformation]], the proportion of deformation to original size is called strain. If the applied stress is sufficiently low (or the imposed strain is small enough), almost all solid materials behave in such a way that the strain is directly proportional to the stress; the coefficient of the proportion is called the [[modulus of elasticity]]. This region of deformation is known as the linearly elastic region.

It is most common for analysts in solid mechanics to use [[linear]] material models, due to ease of computation. However, real materials often exhibit [[non-linear]] behavior. As new materials are used and old ones are pushed to their limits, non-linear material models are becoming more common.

These are basic models that describe how a solid responds to an applied stress:
# [[Elasticity (physics)|Elasticity]] – When an applied stress is removed, the material returns to its undeformed state. Linearly elastic materials, those that deform proportionally to the applied load, can be described by the [[linear elasticity]] equations such as [[Hooke's law]].
# [[Viscoelasticity]] – These are materials that behave elastically, but also have [[friction|damping]]: when the stress is applied and removed, work has to be done against the damping effects and is converted in heat within the material resulting in a [[hysteresis loop]] in the stress–strain curve. This implies that the material response has time-dependence.
# [[Plasticity (physics)|Plasticity]] – Materials that behave elastically generally do so when the applied stress is less than a yield value. When the stress is greater than the yield stress, the material behaves plastically and does not return to its previous state. That is, deformation that occurs after yield is permanent.
# [[Viscoplasticity]] - Combines theories of viscoelasticity and plasticity and applies to materials like [[gel]]s and [[mud]].
# Thermoelasticity - There is coupling of mechanical with thermal responses. In general, thermoelasticity is concerned with elastic solids under conditions that are neither isothermal nor adiabatic. The simplest theory involves the [[Fourier's law]] of heat conduction, as opposed to advanced theories with physically more realistic models.