Open main menu
Home
Random
Recent changes
Special pages
Community portal
Preferences
About Wikipedia
Disclaimers
Incubator escapee wiki
Search
User menu
Talk
Dark mode
Contributions
Create account
Log in
Editing
Tropospheric scatter
(section)
Warning:
You are not logged in. Your IP address will be publicly visible if you make any edits. If you
log in
or
create an account
, your edits will be attributed to your username, along with other benefits.
Anti-spam check. Do
not
fill this in!
===Use=== [[File:Tropo Scatter communications.jpg|thumb|Pole Vault used circular parabolic antennas; later systems generally used squared-off versions sometimes known as "billboards".]] The [[Path loss|propagation loss]]es are very high; only about one [[trillionth]] ({{scinote|fn=eng|0.00000000001}}) of the transmit power is available at the receiver. This demands the use of antennas with extremely large [[antenna gain]]. The original Pole Vault system used large [[parabolic reflector]] [[Dish antenna|dish]] antennas, but these were soon replaced by [[billboard antenna]]s which were somewhat more robust, an important quality given that these systems were often found in harsh locales. Paths were established at distances over {{convert|1000|km|mi}}. They required antennas ranging from {{convert|9|to|36|m}} and amplifiers ranging from {{val|1|u=kW}} to {{val|50|u=kW}}. These were analogue systems which were capable of transmitting a few voice channels. Troposcatter systems have evolved over the years. With [[communication satellite]]s used for long-distance communication links, current troposcatter systems are employed over shorter distances than previous systems, use smaller antennas and amplifiers, and have much higher bandwidth capabilities. Typical distances are between {{convert|50|and|250|km}}, though greater distances can be achieved depending on the climate, terrain, and data rate required. Typical antenna sizes range from {{convert|1.2|to|12|m}} while typical amplifier sizes range from {{val|10|u=W}} to {{val|2|u=kW}}. Data rates over {{val|20|u=Mbit/s}} can be achieved with today's technology. Tropospheric scatter is a fairly secure method of propagation as dish alignment is critical, making it extremely difficult to intercept the signals, especially if transmitted across open water, making them highly attractive to military users. Military systems have tended to be ‘thin-line’ tropo – so called because only a narrow [[Bandwidth (signal processing)|bandwidth]] ‘information’ channel was carried on the tropo system; generally up to 32 analogue ({{frequency|4|kHz}} bandwidth) channels. Modern military systems are "wideband" as they operate 4-16 Mbit/s digital data channels. Civilian troposcatter systems, such as the [[British Telecom]] (BT) [[North Sea]] oil communications network, required higher capacity ‘information’ channels than were available using HF (high frequency – {{frequency|3|MHz}} to {{frequency|30|MHz}}) radio signals, before satellite technology was available. The BT systems, based at [[Scousburgh]] in the [[Shetland Islands]], [[Mormond Hill]] in [[Aberdeenshire]] and Row Brow near [[Scarborough, North Yorkshire|Scarborough]], were capable of transmitting and receiving 156 analogue ({{frequency|4|kHz}} bandwidth) channels of data and telephony to / from North Sea oil production platforms, using [[frequency-division multiplexing]] (FDMX) to combine the channels. Because of the nature of the turbulence in the troposphere, quadruple [[Antenna diversity|diversity propagation]] paths were used to ensure {{percentage|9998|10000|2}} reliability of the service, equating to about 3 minutes of downtime due to propagation drop out per month. The quadruple space and polarisation diversity systems needed two separate dish antennas (spaced several metres apart) and two differently [[Polarization (waves)|polarised]] [[feed horn]]s – one using vertical polarisation, the other using horizontal polarisation. This ensured that at least one signal path was open at any one time. The signals from the four different paths were recombined in the receiver where a phase corrector removed the [[phase difference]]s of each signal. Phase differences were caused by the different path lengths of each signal from transmitter to receiver. Once phase corrected, the four signals could be combined additively. [[File:Atmosphere layers-en.svg|right|90px]]
Edit summary
(Briefly describe your changes)
By publishing changes, you agree to the
Terms of Use
, and you irrevocably agree to release your contribution under the
CC BY-SA 4.0 License
and the
GFDL
. You agree that a hyperlink or URL is sufficient attribution under the Creative Commons license.
Cancel
Editing help
(opens in new window)