Editing File system (section)

===Minimal file system / audio-cassette storage===
In the 1970s disk and digital tape devices were too expensive for some early [[microcomputer]] users. An inexpensive basic data storage system was devised that used common [[audio cassette]] tape.

When the system needed to write data, the user was notified to press "RECORD" on the cassette recorder, then press "RETURN" on the keyboard to notify the system that the cassette recorder was recording. The system wrote a sound to provide time synchronization, then [[Kansas City standard|modulated sounds]] that encoded a prefix, the data, a [[checksum]] and a suffix. When the system needed to read data, the user was instructed to press "PLAY" on the cassette recorder. The system would ''listen'' to the sounds on the tape waiting until a burst of sound could be recognized as the synchronization. The system would then interpret subsequent sounds as data. When the data read was complete, the system would notify the user to press "STOP" on the cassette recorder. It was primitive, but it (mostly) worked. Data was stored sequentially, usually in an unnamed format, although some systems (such as the [[Commodore PET]] series of computers) did allow the files to be named. Multiple sets of data could be written and located by fast-forwarding the tape and observing at the tape counter to find the approximate start of the next data region on the tape. The user might have to listen to the sounds to find the right spot to begin playing the next data region. Some implementations even included audible sounds interspersed with the data.