Editing C64 Direct-to-TV (section)

==Hardware-modding==
Since the internal [[Printed circuit board|circuit board]] has exposed [[solder]] points for floppy-drive and keyboard ports, hardware modifications of the C64DTV are relatively simple.

'''Known hardware mods'''
* Keyboard connector
* External joystick (Port 1 and 2)
* Floppy connector
* Power unit connector
* Fixing the palette problems of the PAL version (to some degree this is possible in software by adjusting palette entries)
* [[S-Video]] connector
* User port
* Original C64 casing and PS2 keyboard <ref>{{cite web |url=http://joco.homeserver.hu/mmc2iecKB/ |title=C64DTV in original C64 case |publisher=Joco.homeserver.hu |access-date=2011-07-19 |archive-date=2011-07-21 |archive-url=https://web.archive.org/web/20110721105225/http://joco.homeserver.hu/mmc2iecKB/ |url-status=live }}</ref>
'''Additional hardware'''
* Data transfer cable ([[Parallel port]] (or USB/serial port via DTV2ser) to Joystick or user port)
* [[SD card]] interface ''1541-III'' or ''MMC2IEC''