Editing Strobe light (section)

=== Stroboscopic effect ===
{{Main|Stroboscopic effect}}
[[Image:Strobe 2.gif|thumb|right|A strobe light flashing at the proper period can appear to freeze or reverse cyclical motion.]]
Special calibrated strobe lights, capable of flashing up to hundreds of times per second, are used in industry to stop the appearance of motion of rotating and other repetitively operating machinery and to measure, or adjust, the rotation speeds or cycle times. Since this stop is only apparent, a marked point on the rotating body will either appear to move backward or forward, or not move, depending on the frequency of the strobe-flash. If the flash occurs equal to the period of rotation (or an even multiple, i.e. 2*π*n/ω, where n is an integer and ω the [[angular frequency]]), the marked point will appear to not move. Any non-integer flash setting will make the mark appear to move forward or backward, e.g. a slight increase of the flash frequency will make the point appear to move backward.

A common use of a strobe flash is to optimize a [[car engine]]'s efficiency at a certain rotational period by directing the strobe-light towards a mark on the [[flywheel]] on the engine's main [[axle]]. The strobe-light tool for such [[ignition timing]] is called a [[timing light]]. Strobe lighting has also been used to see the movements of the vocal cords in slow motion during speech, a procedure known as video-stroboscopy.