Editing TRIAC (section)

===Quadrant 3===
[[file:Triac Quad III.svg|thumb|Figure 6: Operation in quadrant 3]]

Quadrant 3 operation occurs when the gate and MT2 are negative with respect to MT1.<sup>[[#figure1|Figure 1]]</sup>

The whole process is outlined in Figure 6. The process happens in different steps here too. In the first phase, the pn junction between the MT1 terminal and the gate becomes forward-biased (step 1). As forward-biasing implies the injection of minority carriers in the two layers joining the junction, electrons are injected in the p-layer under the gate. Some of these electrons do not recombine and escape to the underlying n-region (step 2). This in turn lowers the potential of the n-region, acting as the base of a pnp transistor which switches on (turning the transistor on without directly lowering the base potential is called '''remote gate control'''). The lower p-layer works as the collector of this PNP transistor and has its voltage heightened: this p-layer also acts as the base of an NPN transistor made up by the last three layers just over the MT2 terminal, which, in turn, gets activated. Therefore, the red arrow labeled with a "3" in Figure 6 shows the final conduction path of the current.<ref name="PowerElec"/>