Editing Roman surface (section)

==One-sidedness==
The Roman surface is non-[[orientable]], i.e. one-sided. This is not quite obvious. To see this, look again at Figure 3.
[[Image:RomanSurfaceTopView.PNG|thumb]]

Imagine an [[ant]] on top of the "third" [[hyperbolic paraboloid]], ''z = x y''. Let this ant move North. As it moves, it will pass through the other two paraboloids, like a ghost passing through a wall. These other paraboloids only seem like obstacles due to the self-intersecting nature of the immersion. Let the ant ignore all double and triple points and pass right through them. So the ant moves to the North and falls off the edge of the world, so to speak. It now finds itself on the northern lobe, hidden underneath the third paraboloid of Figure 3. The ant is standing upside-down, on the "outside" of the Roman surface.

Let the ant move towards the Southwest. It will climb a slope (upside-down) until it finds itself "inside" the Western lobe. Now let the ant move in a Southeastern direction along the inside of the Western lobe towards the ''z = 0'' axis, always above the ''x-y'' plane. As soon as it passes through the ''z = 0'' axis the ant will be on the "outside" of the Eastern lobe, standing rightside-up.

Then let it move Northwards, over "the hill", then towards the Northwest so that it starts sliding down towards the ''x = 0'' axis. As soon as the ant crosses this axis it will find itself "inside" the Northern lobe, standing right side up. Now let the ant walk towards the North. It will climb up the wall, then along the "roof" of the Northern lobe. The ant is back on the third hyperbolic paraboloid, but this time under it and standing upside-down. (Compare with [[Klein bottle]].)